Applied Mathematics and Mechanics >
Aerodynamic/stealth design of S-duct inlet based on discrete adjoint method
Received date: 2023-11-10
Online published: 2024-04-08
Copyright
It is a major challenge for the airframe-inlet design of modern combat aircrafts, as the flow and electromagnetic wave propagation in the inlet of stealth aircraft are very complex. In this study, an aerodynamic/stealth optimization design method for an S-duct inlet is proposed. The upwind scheme is introduced to the aerodynamic adjoint equation to resolve the shock wave and flow separation. The multilevel fast multipole algorithm (MLFMA) is utilized for the stealth adjoint equation. A dorsal S-duct inlet of flying wing layout is optimized to improve the aerodynamic and stealth characteristics. Both the aerodynamic and stealth characteristics of the inlet are effectively improved. Finally, the optimization results are analyzed, and it shows that the main contradiction between aerodynamic characteristics and stealth characteristics is the centerline and cross-sectional area. The S-duct is smoothed, and the cross-sectional area is increased to improve the aerodynamic characteristics, while it is completely opposite for the stealth design. The radar cross section (RCS) is reduced by phase cancelation for low frequency conditions. The method is suitable for the aerodynamic/stealth design of the aircraft airframe-inlet system.
Jun DENG, Ke ZHAO, Lin ZHOU, Wei ZHANG, Bowen SHU, Jiangtao HUANG, Zhenghong GAO . Aerodynamic/stealth design of S-duct inlet based on discrete adjoint method[J]. Applied Mathematics and Mechanics, 2024 , 45(4) : 725 -746 . DOI: 10.1007/s10483-024-3106-7
| 1 | SANG, J. H. Low-Observable Technologies of Aircraft, Aviation Industry Press, Beijing (2013) |
| 2 | JIN, J. Electromagnetic scattering from large. deep, and arbitrarily-shaped open cavities. Electromagnetics, 18 (1), 3- 34 (1998) |
| 3 | ANASTASSIU, H. T. A review of electromagnetic scattering analysis for inlets, cavities, and open ducts. IEEE Antennas and Propagation Magazine, 45 (6), 27- 40 (2003) |
| 4 | ZHANG, K., WANG, C. F., and JIN, J. M. Broadband monostatic RCS and ISAR computation of large and deep open cavities. IEEE Transactions on Antennas and Propagation, 66 (8), 4180- 4193 (2018) |
| 5 | LING, H., CHOU, R. C., and LEE, S. W. Shooting and bouncing rays: calculating the RCS of an arbitrarily shaped cavity. IEEE Transactions on Antennas and Propagation, 37 (2), 194- 205 (1989) |
| 6 | NIE, Z. P. Modeling of Electromagnetic Scattering Characteristics of Target and Environments Theory, Method and Realization, National Defense Industry Press, Beijing (2009) |
| 7 | SONG, J. M., and CHEW, W. C. Multilevel fast-multipole algorithm for solving combined field integral equations of electromagnetic scattering. Microwave and Optical Technology Letters, 10 (1), 14- 19 (1995) |
| 8 | JIN, J. The Finite Element Method in Electromagnetics, Wiley-IEEE Press, New Jersey (2014) |
| 9 | TAFLOVE, A., HAGNESS, S. C., and PIKET-MAY, M. Computational Electromagnetics: the Finite-Difference Time-Domain Method, Academic Press, Burlington, 629–670 (2005) |
| 10 | ZHANG, Z. and LUM, K. Y. S-shaped inlet design optimization using the adjoint equation method. 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Sacramento, California (2006) |
| 11 | LIU, P. Calculation of Inlet Total Pressure Distortion and Shape Optimization, Ph. D. dissertation, Northwestern Polytechnical University (2020) |
| 12 | KUCUK, U. C. and TUNCER, I. H. Adjoint based shape optimization of an S-shaped duct with SU2. AIAA Scitech 2022 Forum, San Diego (2022) |
| 13 | LEE, B. J., LIOU, M. S., and KIM, C. Optimizing a boundary-layer-ingestion offset inlet by discrete adjoint approach. AIAA Journal, 48 (9), 2008- 2016 (2010) |
| 14 | ORDAZ, I., RALLABHANDI, S. K., NIELSEN, E. J., and DISKIN, B. Mitigation of engine inlet distortion through adjoint-based design. 35th AIAA Applied Aerodynamics Conference, Denver, Colorado (2017) |
| 15 | KAMAT, V., RAO, V., XU, M., and SAXENA, S. Flow distortion based S-duct optimization using adjoint methodology. AIAA Avitation 2020 Forum, Reston, Virginia (2020) |
| 16 | CHIANG, C., KOO, D., and ZINGG, D. W. Aerodynamic shape optimization of an S-duct intake for a boundary layer ingesting engine. Journal of Aircraft, 59 (3), 725- 741 (2021) |
| 17 | HE, Y. B., YANG, Q. Z., and GAO, X. Comprehensive optimization design of aerodynamic and electromagnetic scattering characteristics of serpentine nozzle. Chinese Journal of Aeronautics, 34 (3), 118- 128 (2021) |
| 18 | SCARAMUZZI, A., BENINI, E., and KIPOUROS, T. Robust design optimisation of S-ducts. AIAA Aviation 2022 Forum, American Institute of Aeronautics and Astronautics, Chicago (2022) |
| 19 | LEER, B. V. Flux-Vector Splitting for the Euler Equation, Springer Berlin, Heidelberg (1997) |
| 20 | DENG, J., GAO, Z. H., HUANG, J. T., ZHAO, K., and XIA, L. Optimization design method of aircraft boundary characteristics based on upwind scheme adjoint equation. Journal of Beijing University of Aeronautics and Astronautics (2024) https://doi.org/10.13700/j.bh.1001-5965.2022.0964 |
| 21 | ZHOU, L., HUANG, J. T., GAO, Z. H., and ZHANG, W. Three-dimensional aerodynamic/stealth optimization based on adjoint sensitivity analysis for scattering problem. AIAA Journal, 58 (6), 2702- 2715 (2020) |
| 22 | KRAFT, D. A Software Package for Sequential Quadratic Programming, Deutsche Forschungs-und Versuchsanstalt für Luft-und Raumfahrt, Köln (1988) |
| 23 | SEDERBERG, T. W., and PARRY, S. R. Free-form deformation of solid geometric models. ACM SIGGRAPH Computer Graphics, 20 (4), 151- 160 (1986) |
| 24 | LIU, G., XIAO, Z. Y., WANG, J. T., and LIU, F. Numerical simulation of missile air-launching process under rail slideway constraints. Acta Aerodynamica Sinica, 33 (2), 192- 197 (2015) |
| 25 | HUANG, J. T., YU, J., GAO, Z. H., ZHOU, Z., and CHEN, B. S. Multi-disciplinary optimization of large civil aircraft using a coupled aero-structural adjoint approach. The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology, Singapore (2019) |
| 26 | HUANG, J. T., LIU, G., ZHOU, Z., GAO, Z. H., and HUANG, Y. Investigation of gradient computation based on discrete adjoint method. Acta Aerodynamica Sinica, 35 (4), 554- 562 (2017) |
| 27 | HUANG, J. T., ZHOU, L., CHEN, X., MA, C., LIU, G., and GAO, Z. H. Integrated aerodynamic and stealth optimization of aircraft based on NS/CFIE adjoint equations. Acta Aeronautica et Astronautica Sinica, 44 (12), 127757 (2023) |
| 28 | DARVE, E. The fast multipole method: numerical implementation. Journal of Computational Physics, 160 (1), 195- 240 (2000) |
| 29 | HUANG, J. T., ZHOU, Z., GAO, Z. H., CHEN, X., and ZHONG, S. D. Study on adjoint optimization of BWB configuration considering the infulence of intake and exhaust system. 32th Congress of the International Council of the Aeronautical Sciences, Shanghai (2021) |
/
| 〈 |
|
〉 |
Email Alert
RSS