Applied Mathematics and Mechanics >
Theoretical modeling of nonlinear rotational stiffness for missile radial countersunk screw lap joints
Received date: 2026-01-14
Revised date: 2026-04-20
Online published: 2026-06-30
Supported by
Project supported by the National Natural Science Foundation of China (No. 12072268) and the Innovation Capability Support Program of Shaanxi Province of China (No. 2025QCY-KXJ-013)
Copyright
Radial countersunk screw lap joints are widely employed to connect adjacent cabin sections in small- and medium-diameter missiles. However, the analysis and design of joint stiffness pose challenges because of geometric discontinuities, clearance, and friction nonlinearities. In this paper, a theoretical model for rapid and reliable prediction of nonlinear joint stiffness is developed. The joint is first discretized into multiple subjoints, each of which is defined to carry only a tensile or compressive load under external loading. The evolution of contact states is incorporated to simulate nonlinear tension and compression stiffness. By combining Bernoulli’s hypothesis with the ellipsoidal deformation theory, the joint rotational stiffness is derived. Finally, the effectiveness of the proposed stiffness prediction method is validated via experiments and detailed simulations. Furthermore, an orthogonal experimental design is used to analyze the importance of critical design parameters. The results indicate that the proposed theoretical model provides satisfactory accuracy. The specification and number of screws are the primary factors influencing the joint rotational stiffness, whereas the lap length and cabin thickness exert a secondary effect. This study presents an explicit theoretical mapping between the structural design parameters and joint nonlinear stiffness, thus facilitating improved design and optimization of jointed structures.
Shuo ZHANG , Ning GUO , Chao XU . Theoretical modeling of nonlinear rotational stiffness for missile radial countersunk screw lap joints[J]. Applied Mathematics and Mechanics, 2026 , 47(7) : 1625 -1646 . DOI: 10.1007/s10483-026-3407-9
| [1] | UMAKANTH, M., NARAYANAMURTHY, V., and KORLA, S. A review of flight intersection joints. International Review of Aerospace Engineering: IREASE, 14, 131 (2021) |
| [2] | LI, G., NIE, Z. K., ZENG, Y., PAN, J. C., and GUAN, Z. Q. New simplified dynamic modeling method of bolted flange joints of launch vehicle. Journal of Vibration and Acoustics, 142, 021011 (2020) |
| [3] | CHEN, Z., ZHAO, Q. J., and ZHOU, G. C. Research on the simulation method for equivalent stiffness of bolted connection thin plate structures. International Journal of Aerospace Engineering, 2024, 8648996 (2024) |
| [4] | ZHU, Y. T. and XIONG, J. J. Temperature effect on mechanical performances and failure mechanisms of single-lap countersunk-screwed CFRPI-metal joint. Composite Structures, 289, 115459 (2022) |
| [5] | MALONEY, J. G., SHELTON, M. T., and UNDERHILL, D. A. Structural Dynamic Properties of Tactical Missile Joints: Phase 1, General Dynamics, Pomona Division Report, No. CR-6-348-945-001 (1970) |
| [6] | MALONEY, J. G. and SHELTON, M. T. Structural Dynamic Properties of Tactical Missile Joints: Phase 2, General Dynamics, Pomona Division Report, No. CR-6-348-945-002 (1971) |
| [7] | ?LECZKA, L. and LE? D. Prying action in bolted circular flange joints: approach based on component method. Engineering Structures, 228, 111528 (2021) |
| [8] | UMAKANTH, M., UDAY KUMAR, P., NARAYANAMURTHY, V., and KORLA, S. Axial stiffness of a slot-nut type conformal segment joint. Recent Advances in Applied Mechanics, Springer, Singapore, 367–377 (2022) |
| [9] | MOHAPATRA, R., PALATHINGAL, S., NARAYANAMURTHY, V., and RAMJI, M. A study on the load-deformation behaviour of countersink lap joints. 66th Congress of ISTAM, Indian Society of Theoretical and Applied Mechanics, Andhra Pradesh, India (2021) |
| [10] | CHEN, W. T., LIU, Z. F., ZHAO, Y. S., YAN, X., LI, M., and LI, Y. Tangential stiffness modeling and multi-stage analysis of single-lap double-bolted joints based on spring coupling element method. Structures, 79, 109610 (2025) |
| [11] | LUAN, Y., GUAN, Z. Q., CHENG, G. D., and LIU, S. A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints. Journal of Sound and Vibration, 331, 325–344 (2012) |
| [12] | MEISAMI, F., MOAVENIAN, M., and AFSHARFARD, A. Nonlinear behavior of single bolted flange joints: a novel analytical model. Engineering Structures, 173, 908–917 (2018) |
| [13] | SHI, W. B. and ZHANG, Z. S. Elastostatic properties for flange-bolted joints. International Journal of Pressure Vessels and Piping, 205, 104966 (2023) |
| [14] | SHI, W. B. and ZHANG, Z. S. Nonlinear vibration mechanism and modeling for flange-bolted joints. Mechanical Systems and Signal Processing, 211, 111183 (2024) |
| [15] | SHI, W. B., WU, S. Z., ZHAO, T. H., and ZHANG, Z. S. Nonlinear vibration modeling for flange-bolted lap joints. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47, 605 (2025) |
| [16] | WOJNAR, A. and KOZ?OWSKI, A. Mechanical model for assessment of the stiffness of bolted flanged joint. Progress in Steel, Composite and Aluminium Structures, Taylor & Francis Group, London, United Kingdom (2006) |
| [17] | KOZ?WSKI, A. and WOJNAR, A. Influence of the flange bolted joints stiffness on the behaviour of steel chimneys. The Third International Conference on Structural Engineering, Mechanics and Computation, Millpress Science Publishers, Cape Town, South Africa (2007) |
| [18] | KOZ?WSKI, A. and WOJNAR, A. Initial stiffness of flange bolted joints and their influence on the behaviour of steel chimneys. Proceedings of Eurosteel 2008: 5th European Conference on Steel and Composite Structures, European Convention for Constructional Steelwork, Brussels, Belgium (2008) |
| [19] | COUCHAUX, M., HJIAJ, M., RYAN, I., and BUREAU, A. Bolted circular flange connections under static bending moment and axial force. Journal of Constructional Steel Research, 157, 314–336 (2019) |
| [20] | COUCHAUX, M., HJIAJ, M., and RYAN, I. Enriched beam model for slender prismatic solids in contact with a rigid foundation. International Journal of Mechanical Sciences, 93, 181–190 (2015) |
| [21] | COUCHAUX, M., HJIAJ, M., RYAN, I., and BUREAU, A. Effect of contact on the elastic behaviour of tensile bolted connections. Journal of Constructional Steel Research, 133, 459–474 (2017) |
| [22] | UMAKANTH, M., KUMAR, P. U., NARAYANAMURTHY, V., and KORLA, S. Modelling the joint rotational compliance of stud-pocket type flight inter-section joint. Thin-Walled Structures, 185, 110565 (2023) |
| [23] | STOCCHI, C., ROBINSON, P., and PINHO, S. T. A detailed finite element investigation of composite bolted joints with countersunk fasteners. Composites Part A: Applied Science and Manufacturing, 52, 143–150 (2013) |
| [24] | KOU, J. F., XU, F., XIE, W., ZHANG, X. Y., and FENG, W. A theoretical 4-stage shear model for single-lap torqued bolted-joint with clearances. Composite Structures, 186, 1–16 (2018) |
| [25] | LIANG, Y. C., XU, F., ZHANG, X. Y., WANG, A. W., and MA, C. H. An analytically improved four-stage model for single-lap torqued bolted joints accounting for preload relaxation. Thin-Walled Structures, 182, 110252 (2023) |
| [26] | ZHANG, S., GUO, N., and XU, C. Experimental and numerical investigations into tensile and compressive behavior of radial countersunk screw lap joints. International Journal of Non-Linear Mechanics, 177, 105159 (2025) |
| [27] | MOHAPATRA, R., PALATHINGAL, S., NARAYANAMURTHY, V., and RAMJI, M. Modeling of counter-bore and counter-sink screw lap joints. Mechanics Based Design of Structures and Machines, 52, 289–314 (2024) |
| [28] | MOHAPATRA, R., PALATHINGAL, S., NARAYANAMURTHY, V., and RAMJI, M. Modeling the mechanical behavior of torque-tightened screw lap joints. Engineering Structures, 298, 117071 (2024) |
| [29] | MOHAPATRA, R., PALATHINGAL, S., NARAYANAMURTHY, V., and RAMJI, M. Modeling the joint rotational stiffness of a radial-type flight intersection joint: an analytical approach, numerical simulation, and experimental validation. Thin-Walled Structures, 196, 111473 (2024) |
| [30] | MOHAPATRA, R., PALATHINGAL, S., NARAYANAMURTHY, V., and RAMJI, M. Investigating the influence of pre-tightening on radial-type flight intersection joints using a spring-mass model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 239(7), 702–723 (2025) |
| [31] | ?CHSNER, A. Classical Beam Theories of Structural Mechanics, Springer International Publishing, Cham (2021) |
| [32] | CAO, J. B. and ZHANG, Z. S. Finite element analysis and mathematical characterization of contact pressure distribution in bolted joints. Journal of Mechanical Science and Technology, 33, 4715–4725 (2019) |
| [33] | SHIMA, H., SATO, M., and PARK, S. J. Suppression of Brazier effect in multilayered cylinders. Advances in Condensed Matter Physics, 2014, 923896 (2014) |
| [34] | LUONGO, A., ZULLI, D., and SCOGNAMIGLIO, I. The Brazier effect for elastic pipe beams with foam cores. Thin-Walled Structures, 124, 72–80 (2018) |
| [35] | WANG, S. A., ZHU, M., XU, Z. J., GUO, M., LI, B., and WU, F. Model considering residual stiffness and stiffness discontinuity of bolted joints. Journal of Theoretical and Applied Mechanics, 60, 63–75 (2021) |
| [36] | CHEN, H., HAO, Z. M., KUANG, J. X., and MAO, Y. J. Modeling of residual stiffness phenomenon in modified Iwan model of bolted joints and its application. International Journal of Non-Linear Mechanics, 167, 104909 (2024) |
| [37] | ZHANG, Z., GU, Z. W., and LIU, J. L. Resonance behaviors of the plate-structured rock with minute defects under the action of multiple types of excitations. International Journal of Applied Mechanics, 17, 2550029 (2025) |
/
| 〈 |
|
〉 |
Email Alert
RSS