[1] Yeh Kai-yuan and Hsu Chin-yun,General solution on certain problems of elasticity with nonhomogeneity and variable thickness:I.Elastic and plastic stress analyses of high speed rotating disc with nonhomogeneity and variable rhickness under nonhomogeneous steady temperature field, Journal of Lanzhou University (Natural Science), Special Number of Mechanics,1,(1979),60-74;Acta Mechanica Sinica,Special Number(1981),78-89;Presented in the 15th International Congress of Theoretical and Applied Mechanics(Toronto)(1980).
[2] Yeh Kai-yuan and Liu Ping,Steady heat conduction of a disc with nonhomogeneity and variable thickness,Applied Mathematics and Mechanics (English Edition),5,5(1984),1587-1593.
[3] Relitkii,G.C.,Structures and Strength Calculation of Steam Turbine’s Parts,National Dynamic press(1955).(in Russian)
[4] Manson,S.S.,The determination of elastic stresses in gas-turbine disks,NACA,TN-1279(1949).
[5] Holms,G.and R.D.Faldetta,Effect of temperature distribution and elastic properties of materials on gas-turbine-disk stresses,NACA,TN-1334(1947).
[6] Carslaw,H.S.and J.C.Jaeger,Conduction of Heat in Solids,Oxford,(1959).
[7] Li Ming-hua and Li Xu-chang, Design method for the stress at each point of blade wheel being permissible one at the same time,The Whole China Conference of Elasticity and Plasticity (Dalian)(1963).(in Chinese)
[8] Tu Ching-hua,The elastic and plastic stresses of high speed rotating disks at elevated temperature,Journal of Tsinghua University,6,5(1959),81-96. (in Chinese)
[9] Gurushankar,G.V.,Thermal stresses in nonhomogeneous anisotropic rotating disk of varying thickness and density,J.S.A.,10,3(1975),137-142.
[10] Wang Zhu-xi,Guo Dun-ren, Treatise of Special Functions, Science press(1978).(in Chinese)
[11] Takeuchi Yoichiro,Thermal Stress,Science Press(1978).(Chinese Translation)
[12] Timoshenko,S.and J.N.Goodier,Theory of Elasticity,People’s Educational Publishing House,(1964).(Chinese Translation)
[13] Lee Ti-chang,On the stresses in rotating disc of variable thickness, Journal of Applied Mechanics,19,3(1952),263-267.
[14] Murthy,D.N.S.and A.W.Sherbourne,Elastic stresses in anisotropic disks of varying thickness,Int.J Mech.Sci.,12,7(1970),627-640.
[15] Gururaja,K.and H.,Srinath,Thermal stresses in anisotropic disks, J Inst.Engrs.(India),53,4(1973),5-10.
[16] Yellareddy,T.and H.Srnath,Elasric stresses in rotating anisotropic annular disk of variable thickness and variable density,Int.J Mech.Sci.,16,2(1974),85-89.
[17] Thompson,A.S.,Stresses in rotating disks at high temperature, Journal of Applied Mechanics,13,1(1946),45-52.
[18] Liu Ping,Equi-strength design of nonhomogeneous variable thickness high speed rotating disk, Thesis of Master Degree of Lanzhou University,(1982).(in Chinese)
[19] The Teaching Faculty of Engine Structure of Beijing Institute of Aeronautics, Strength Calculation of Structure and Machine parts of Aeronautical Turbine engine, National Defence Publishing House(1961).(in Chinese)
[20] Liang Zhi-ming,Strength of Materials, People Educational publishing House(1958),111-117. (in Chinese)
[21] Wang De-ren,Method for Solving a System of Nonlinear Equations and Optimum Method,People;Educational Publishing House(1979).(in Chinese)
[22] Bhavikatti,S.S.,Optimum shape design of rotating disks,Computers and Structures.11,5(1980),397-401.
[23] Seireg,A.and K.S.Surana,Optimum design of rotating disks, J Eng. Indu.,Trans.ASME,92,1(1970),1-10.
[24] Ari-Gur,J.and Stavsky,On rotating polar-orthotropic circular disks,Int.J.Solids Structure,17,(1981),57-67.