[1] A. I. Lurie, Stress concentrations on the edge of cutouts in circular cylindrical shells,Soviet Applied Mechanics, (1946), 6. (in Russian)
[2] J. G. Lekkerkerker, Stress concentrations around circular holes in cylindrical shells, TheXI Int. Congr. of Appl. Mech., Munich (Germany), (1964).
[3] A. C. Eringen. et al, State of stress in a circular cylindrical shell with a circular hole.WRC Bulletin, 102 (1965).
[4] Van P. Dyke, Stresses about a circular hole in a cylindrical shell, J. AIAA, 3, 9 (1965).
[5] L. X. Qian, The stress problem of circular cylindrical shells with a circular cutout and itselementary solution, Journal of Dalian Institute of Technology , 3, 4 (1965). (in Chinese)
[6] Y. Q. Long et al, Some problems of stress concentration in shallow shells of ellipticparaboloid. Acta Mechanica Sinica, 8, 2 (1965). (in Chinese)
[7] D. K. Liu et al, Application of the method of complex functions to dynamic stressconcentrations, Wave Motion, 4, (1982), 293～304. (in Chinese).
[8] C. R. Steel et al, Stress analysis of nozzles in cylindrical vessels with external load, ASMEJournal of Pressure Vessel Technology , 105 (1983), 191～200.
[9] C. R. Steel et al, An efficient computational approach for a large opening in a cylindricalvessel. ASME Journal of Pressure Vessel Technology. 108 (1986), 436～442.
[10] B. H. Xiu et al ed., Theory of the Shell Containing Cutouts and Its Experiments.Publishing House of the Defence Industry. Beijing (1987). (in Chinese)
[11] P. X. Zhang, K. Z. Hwang and M. W. Lu. The stress analysis of cylindrica1 shells withcutouts. Acta Mechanica Sinica. 23, 6 (1991). (in Chinese)
[12] M. D. Xiu et al, The general situation of researches for stress problem of circularcylindrical shells with cutouts, Chinese Pressure Vessel. 8. 2 (1991), 9～15. (in Chinese) |
Email Alert
RSS