Applied Mathematics and Mechanics (English Edition) ›› 2011, Vol. 32 ›› Issue (6): 739-748.doi: https://doi.org/10.1007/s10483-011-1453-x

• 论文 • 上一篇    下一篇

  

  1. Jiangsu Key Laboratory of Hi-Tech Research for Wind Turbine Design, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P. R. China
  • 收稿日期:2011-01-15 修回日期:2011-04-14 出版日期:2011-06-01 发布日期:2011-06-01
  • 基金资助:

    Project supported by theNational Basic Research Program of China (973 Program) (No. 2007CB714600)

Improved non-dominated sorting genetic algorithm (NSGA)-II in multi-objective optimization studies of wind turbine blades

 WANG Long, WANG Tong-Guang, LUO Yuan   

  1. Jiangsu Key Laboratory of Hi-Tech Research for Wind Turbine Design, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, P. R. China
  • Received:2011-01-15 Revised:2011-04-14 Online:2011-06-01 Published:2011-06-01
  • Supported by:

    Project supported by theNational Basic Research Program of China (973 Program) (No. 2007CB714600)

摘要:

The non-dominated sorting genetic algorithm (NSGA) is improved with the controlled elitism and dynamic crowding distance. A novel multi-objective optimization algorithm is obtained for wind turbine blades. As an example, a 5 MWwind turbine blade design is presented by taking the maximum power coefficient and the minimum blade mass as the optimization objectives. The optimal results show that this algorithm has good performance in handling the multi-objective optimization of wind turbines, and it gives a Pareto-optimal solution set rather than the optimum solutions to the conventional multiobjective optimization problems. The wind turbine blade optimization method presented in this paper provides a new and general algorithm for the multi-objective optimization of wind turbines.

Abstract:

The non-dominated sorting genetic algorithm (NSGA) is improved with the controlled elitism and dynamic crowding distance. A novel multi-objective optimization algorithm is obtained for wind turbine blades. As an example, a 5 MWwind turbine blade design is presented by taking the maximum power coefficient and the minimum blade mass as the optimization objectives. The optimal results show that this algorithm has good performance in handling the multi-objective optimization of wind turbines, and it gives a Pareto-optimal solution set rather than the optimum solutions to the conventional multiobjective optimization problems. The wind turbine blade optimization method presented in this paper provides a new and general algorithm for the multi-objective optimization of wind turbines.

中图分类号: 

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals