STABILITY OF BOREHOLES IN A GEOLOGIC MEDIUM INCLUDING THE EFFECTS OF ANISOTROPY

摘要/Abstract

摘要： An analytical formulation is developed to investigate the stability of a deep, inclined borehole drilled in a geologic medium and subjected to an internal pressure and a non_hydrostatic stress field. The formulation consists of a three_dimensional(3_D)analysis of stresses around a borehole, combined with internal pressurization of the borehole to obtain an approximate solution of the overall stress distribution. The orientation of the borehole, the in_situ stresses and bedding plane can all be arbitrarily related to each other to represent the actual field situations. Both tensile failure and shear failure potentials of a borehole are investigated. The failure criteria applied assume that when the least principal stress exceeds the strength of the formation in tension, a tensile failure occurs. Shear failure is represented using the modified Drucker_Prager failure criterion for anisotropic materials. A parametric study is carried out to assess the effect of material anisotropy, bedding plane inclination and in_situ stress conditions on borehole stability. Results of the parametric study indicate that wellbore stability is significantly influenced by a high borehole inclination, high degree of material anisotropy, in_situ stress conditions and high formation bedding plane inclination. The stability of a borehole in an elasto_plastic medium is also investigated. In order to evaluate the extent of the plastic zone around a borehole and the effect of anisotropy of the material on this plastic zone, a mathematical formulation is developed using theories of elasticity and plasticity. The borehole is assumed to be vertical, subjected to hydrostatic stresses, and drilled in a transversely isotropic geologic medium. A parametric study is carried out to investigate the effect of material anisotropy on the plastic behavior of the geologic medium. Results indicate that the stress distribution around a borehole, the extent of the plastic zone, and the failure pressure are influenced by the degree of material anisotropy and value of in_situ overburden stresses. It was observed that the borehole becomes less stable as the degree of anisotropy of the geologic medium increases.

关键词: stability of borehole, tensile failure, shear failure, failure criteria, stress distribution

Abstract: An analytical formulation is developed to investigate the stability of a deep, inclined borehole drilled in a geologic medium and subjected to an internal pressure and a non_hydrostatic stress field. The formulation consists of a three_dimensional(3_D)analysis of stresses around a borehole, combined with internal pressurization of the borehole to obtain an approximate solution of the overall stress distribution. The orientation of the borehole, the in_situ stresses and bedding plane can all be arbitrarily related to each other to represent the actual field situations. Both tensile failure and shear failure potentials of a borehole are investigated. The failure criteria applied assume that when the least principal stress exceeds the strength of the formation in tension, a tensile failure occurs. Shear failure is represented using the modified Drucker_Prager failure criterion for anisotropic materials. A parametric study is carried out to assess the effect of material anisotropy, bedding plane inclination and in_situ stress conditions on borehole stability. Results of the parametric study indicate that wellbore stability is significantly influenced by a high borehole inclination, high degree of material anisotropy, in_situ stress conditions and high formation bedding plane inclination. The stability of a borehole in an elasto_plastic medium is also investigated. In order to evaluate the extent of the plastic zone around a borehole and the effect of anisotropy of the material on this plastic zone, a mathematical formulation is developed using theories of elasticity and plasticity. The borehole is assumed to be vertical, subjected to hydrostatic stresses, and drilled in a transversely isotropic geologic medium. A parametric study is carried out to investigate the effect of material anisotropy on the plastic behavior of the geologic medium. Results indicate that the stress distribution around a borehole, the extent of the plastic zone, and the failure pressure are influenced by the degree of material anisotropy and value of in_situ overburden stresses. It was observed that the borehole becomes less stable as the degree of anisotropy of the geologic medium increases.

Key words: stability of borehole, tensile failure, shear failure, failure criteria, stress distribution

中图分类号:

TB122
TE21

Dinesh Gupta;Musharraf Zaman. STABILITY OF BOREHOLES IN A GEOLOGIC MEDIUM INCLUDING THE EFFECTS OF ANISOTROPY[J]. Applied Mathematics and Mechanics (English Edition), 1999, 20(8): 837-856.

参考文献

[1] Aadnoy B S. Continuum mechanics analysis of the stability of boreholes in anisotropic rock formations[D]. Ph D Thesis. Norway: Norwegian Institute of Technology,University of Trondheim,1987.
[2] Ong S H. Borehole stability[D]. Ph D Dissertation. Norman OK: University of Oklahoma,1994.
[3] Lekhnitskii S G. Theory of Elasticity of an Anisotropic Body[M]. Moscow: Mir Publishers, 1981.
[4] Amader B. Rock anisotropy and theory of stress measurements[A]. In: Brebbia, Orszag Eds. Lecture Notes in Engineering[C].Springer Verlag,1983.
[5] Aadnoy B S. A complete elastic model for fluid－induced and in－situ generated stresses with the presence of a borehole[J].Energy Sources,1987,9:239～259.
[6] Bradley W B. Failure of inclined boreholes[J]. Journal of Energy Resources Technology Trans, ASME,1979,101:232～239.
[7] Hsiao C. Growth of plastic zone in porous medium around a wellbore[J].Offshore Technology Conference,1988,26:439～448.
[8] Westergaard H M. Plastic state of stresses around a deep well[J].Journal of the Boston Society of Civil Engineers,1940,27(1):1～5.
[9] Gnirk P F. The mechanical behavior of uncased wellbores situated in elastic/plastic media under hydrostatic stress[J].Society of Petroleum Engineers Journal,1972,12:49～59.
[10] Risnes R, Bratli R K, Horsud P. Sand stresses around a wellbore[J]. Society of Petroleum Engineers Journal,1982,22:883～898.
[11] Biot M A. Theory of elasticity and consolidation for a porous anisotropic solid[J].Journal of Applied Physics,1941,26(2):182～185.
[12] Yew C H, Li Y. Fracture of a deviated well[J].SPE Production Engineering,1988,3:429～437.
[13] Chen Dar－Hao. Three dimensional testing and constitutive modeling of coal for analysis of ground subsidence due to mining[D].M S Thesis. Norman OK: University of Oklahoma,1992.
[14] Drucker D C, Prager W. Soil mechanics and plastic analysis or limit design[J].Quart Appl Math,1952,10:157～165.
[15] Faruque M O, Chang C. New cap model for failure and yielding of pressure sensitive materials[J].Journal of Engineer Mechanics Division, ASCE,1986,112:1041～1053.
[16] Najjar Y M. Constitutive modelling and finite element analysis of ground subsidence due to mining[D]. Ph D Thesis. Norman OK: University of Oklahoma,1990.
[17] Lama R D, Vutukuri V S. Handbook on Mechanical Properties of Rocks[M]. Series on Rock and Soil Mechanics Vol.Ⅱ,Ohio: Trans Tech Publications,1978.
[18] Infante E F, Chenevert M E. Stability of boreholes drilled through salt formations displaying plastic behavior[J].Society of Petroleum Engineers Drilling Engineering(SPEDE),1989,4:57～65.
[19] Gupta D J. Stability of boreholes in a transversely isotropic geologic medium[D]. M S Thesis. Norman OK: University of Oklahoma,1994.
[20] Aadnoy B S. Stability of highly inclined boreholes[J].SPEDE,1987,2:364～374.
[21] Aadnoy B S. Modeling of the stability of highly inclined boreholes in anisotropic rock formations[J].SPEDE,1988,2:259～267.
[22] Aadnoy B S. Method for fracture－gradient prediction for vertical and inclined boreholes[J].SPEDE,1989,4:99～103.
[23] Aadnoy B S. Stresses around horizontal boreholes drilled in sedimentary rocks[J].Journal of Petroleum Science and Engineering,1989,2:349～360.
[24] Aadnoy B S. Effects of reservoir depletion on borehole stability[J].Journal of Petroleum Science and Engineering,1991,5:57～61.
[25] Bratli R K, Risnes R. Stability and failure of sand arches[J].Society of Petroleum Engineers Journal,1981,21:236～248.
[26] Tsai S W, Wu E M. A general theory of strength for anisotripic materials[J]. J Composite Material,1971,5:58～80.