Thermal stresses in infinite circular cylinder subjected to rotation

doi:10.1007/s10483-012-1605-7

Applied Mathematics and Mechanics (English Edition) ›› 2012, Vol. 33 ›› Issue (8): 1059-1078.doi: https://doi.org/10.1007/s10483-012-1605-7

Thermal stresses in infinite circular cylinder subjected to rotation

A. M. ABD-ALLA¹, G. A. YAHYA^2,3

1. Department of Mathematics, Faculty of Science, Taif University, Saudi Arabia;
2. Department of Physics, Faculty of Science, Taif University, Saudi Arabia;
3. Department of Physics, Faculty of Science, Aswan University, Aswan 81528, Aswan, Egypt

收稿日期:2011-06-13 修回日期:2012-03-09 出版日期:2012-08-10 发布日期:2012-08-10
通讯作者: G. A. YAHYA, E-mail: gamal102@yahoo.com E-mail:gamal102@yahoo.com

Thermal stresses in infinite circular cylinder subjected to rotation

A. M. ABD-ALLA¹, G. A. YAHYA^2,3

1. Department of Mathematics, Faculty of Science, Taif University, Saudi Arabia;
2. Department of Physics, Faculty of Science, Taif University, Saudi Arabia;
3. Department of Physics, Faculty of Science, Aswan University, Aswan 81528, Aswan, Egypt

Received:2011-06-13 Revised:2012-03-09 Online:2012-08-10 Published:2012-08-10

摘要/Abstract

摘要： The present investigation is concerned with the effect of rotation on an infi- nite circular cylinder subjected to certain boundary conditions. An analytical procedure for evaluation of thermal stresses, displacements, and temperature in rotating cylinder subjected to thermal load along the radius is presented. The dynamic thermal stresses in an infinite elastic cylinder of radius a due to a constant temperature applied to a variable portion of the curved surface while the rest of surface is maintained at zero temperature are discussed. Such situation can arise due to melting of insulating material deposited on the surface cylinder. A solution and numerical results are obtained for the stress components, displacement components, and temperature. The results obtained from the present semi-analytical method are in good agreement with those obtained by using the previously developed methods.

关键词: Ishikawa iterative process, Φ-stongly pseudocontractive operators, uniformly smooth Banach spaces

Abstract: The present investigation is concerned with the effect of rotation on an infi- nite circular cylinder subjected to certain boundary conditions. An analytical procedure for evaluation of thermal stresses, displacements, and temperature in rotating cylinder subjected to thermal load along the radius is presented. The dynamic thermal stresses in an infinite elastic cylinder of radius a due to a constant temperature applied to a variable portion of the curved surface while the rest of surface is maintained at zero temperature are discussed. Such situation can arise due to melting of insulating material deposited on the surface cylinder. A solution and numerical results are obtained for the stress components, displacement components, and temperature. The results obtained from the present semi-analytical method are in good agreement with those obtained by using the previously developed methods.

Key words: Ishikawa iterative process, Φ-stongly pseudocontractive operators, uniformly smooth Banach spaces

中图分类号:

O343.6

A. M. ABD-ALLA;G. A. YAHYA. Thermal stresses in infinite circular cylinder subjected to rotation[J]. Applied Mathematics and Mechanics (English Edition), 2012, 33(8): 1059-1078.

参考文献

[1] Noda, N., Shizuoka, A., and Ashida, F. A. Three-dimensional treatment of transient thermal stressin a transversely isotropic semi-infinite circular cylinder subjected to a symmetric temperature onthe cylindrical surface. Acta Mechanica, 58, 175-191 (1986)
[2] Tsai, Y. M. Thermal stress in a transversely isotropic medium containing a penny-shaped crack.ASME J. Appl. Mech., 50, 24-28 (1993)
[3] Chandrasekharaiah, D. S. and Keshavan, H. R. Thermoelastic plane waves in a transverselyisotropic body. Acta Mehanica, 47, 11-23 (1991)
[4] Youssef, H. M. Generalized thermoelastic infinite medium with cylindrical cavity subjected tomoving heat source. Mechanics Research Communication, 36, 487-496 (2009)
[5] Ponnusamy, P. Wave propagation in a generalized thermoelastic solid cylinder of arbitrary cross-section. International Journal of Solid and Structures, 44, 5336-5348 (2007)
[6] El-Naggar, A. M., Abd-Alla, A. M., and Ahmed, S. M. On the rotation of a non-homogeneouscomposite infinite cylinder of orthotropic material. Applied Mathematics and Computation, 69,147-157 (1995)
[7] Sharma, J. N. and Grover, D. Body wave propagation in rotating thermoelastic media. MechanicsResearch Communications, 36, 715-721 (2009)
[8] Venkatesan, M. and Ponnusamy, P.Wave propagation in a generalized thermoelastic solid cylinderof arbitrary cross-section immersed in a fluid. International Journal of Mechanical Science, 49,741-751 (2007)
[9] Kardomateas, G. A. Transient thermal stress in cylindrically orthotropic compsite tubes. ASMEJ. Appl. Mech., 56, 411-416 (1989)
[10] Green, A. E. and Lindsay, K. A. Thermoelasticty. Journal of Elasticity, 2, 1-7 (1972)
[11] Abd-Alla, A. M. and Abo-Dahah, S. M. Time-harmonic in a generalized magneto-thermo-viscoelastic continum with and without energy dissipation. Applied Mathematical Modelling, 33,2388-2402 (2009)
[12] Auriault, J. L. Body wave propagation in rotating elastic media. Mechanics Research Communications, 31, 21-27 (2004)
[13] Morse, P. M. and Feshbach, H. Methods of Theoretical Physics, Part I, McGraw-Hill, New York(1953)
[14] Hearmon, R. F. S. Elastic constants of anisotropic materials. Reviews of Modern Physics, 18,409-440 (1946)
[15] Dhaliwal, R. S. and Choudhary, K. Theormoelastic problem for cylindrical regions. Arch. Mech.Stos., 20, 47-65 (1968)
[16] Singh, A. and Puri, P. Thermal stress in an infinite cylinder. Arch. Mech. Stos., 77, 77-88 (1963)
[17] Abd-Alla, A. M., Abo-Dahab, S. M., and Hammad, H. A. H. Propagation of Rayleigh wavesin generalized magneto-thermoelastic orthotropic material under initial stress and gravity field.Applied Mathematical Modelling, 35, 2981-3000 (2011)
[18] Kumar, R. and Mukhopadhyay, S. Effects of thermal relaxation time on plane wave propagationunder two-temperature thermoelasticity. International Journal of Engineering Science, 48, 128-139 (2010)
[19] Abd-Alla, A. M. and Mahmoud, S. R. Magneto-thermoelastic problem in rotating non-homogeneous orthotropic hollow cylinder under the hyperbolic heat conduction model. Meccanica,45, 451-461 (2010)

Thermal stresses in infinite circular cylinder subjected to rotation

Thermal stresses in infinite circular cylinder subjected to rotation

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	黄震宇. ISHIKAWA ITERATIVE PROCESS IN UNIFORMLY SMOOTH BANACH SPACES[J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(11): 1306-1310.
[2]	张石生. ON THE CONVERGENCE PROBLEMS OF ISHIKAWA AND MANN ITERATIVE PROCESSES WITH ERROR FOR Φ-PSEUDO CONTRACTIVE TYPE MAPPINGS[J]. Applied Mathematics and Mechanics (English Edition), 2000, 21(1): 1-12.