(1) Murray, D. W., and E. L. Wilson, Finite element large deflection analysis of plates, J. Struct. Div. ASCE, 95 (1969).
(2) Walter, E. Haisler, Development and evaluation of solution procedures for geometrically nonlinear structural by the direct stiffness method, AIAA. J.4(1971),1-13.
(3) Fox, R. L., Development in structural analysis by direct energy minimzation,AIAA. J. Vol. 6, No. 6(1968).
(4) Liu Zhing-xing, FengTai-hua and Li Ding-xia, Solution of geometrical nonlinear problem of a stiffened plate and Shell by the finite element method, Journal of Nanjing Aeronautical Institute of China, No. 5, (1979). (in Chinese).
(5) Chang Fu-zong, Liu Ye-lang et al., Finite Element Analysis of Large Deformation and Post-buckling for Stiffened Plate, Science and Technology Material, No. 1,(1980). (Complied by No. 605 Research Institute, The Third Ministry of Machine-Building, People's Republic of China) (in Chinese).
(6) Novozhilov, V. V., Foundations of the Nonlinear Theory of Elasticity, (English version by F. Bagernihi, H. Komm, and W. Seidel). Rochester, New York: Graylock Press.(1953).
(7) Gass, N. and B. Tabarrod, Large Deformation analysis of plates and cylindrical shells by a mixed finite element method, Int. J. Num. Mesh, Eng. Vol.10, 711-746.
(8) Chen Yen-hang, A Quickly Convergent Rectangular Quasi-Conforming Plate Bending Element, Postgraduate Thesis of University of Science and Technology of China in 1981. (in Chinese).
(9) Feng Kang, Numerical Confuting Method, National Defence Industry Press of China,12 (1978). (in Chinese).
(10) Washizu, K., Variational Methods in Elasticity and Plasticity, Pergamon Press, (1968), 164.
(11) Oulemill, A. C., Pliable and Tough Plate and Shell, (Chinese version, tr. from Russian by Lu Yen-da et al.) Science Press, (1963).
(12) Timoshenko, S., and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York, 1st ed. (1940), 2nd ed. (1959). |