Email Alert    RSS

Applied Mathematics and Mechanics (English Edition) ›› 1987, Vol. 8 ›› Issue (8): 725-732.

• 论文 • 上一篇    下一篇

A GENERAL SOLUTION OF RECTANGULAR THIN PLATES IN BENDING

黄炎   

  1. National University of Defense Technology, Changsha
  • 收稿日期:1986-02-13 出版日期:1987-08-18 发布日期:1987-08-18

A GENERAL SOLUTION OF RECTANGULAR THIN PLATES IN BENDING

Huang Yan   

  1. National University of Defense Technology, Changsha
  • Received:1986-02-13 Online:1987-08-18 Published:1987-08-18

PDF

668

摘要： In this paper a general solution of rectangular plates in bending is given. The integral constants are determined by means of boundary conditions. This method is simpler and easier than the method of superposition.

关键词: hybrid stress element, basic deformation mode, assumed stress mode, mode orthogonality, suppression of zero-energy deformation mode

Abstract: In this paper a general solution of rectangular plates in bending is given. The integral constants are determined by means of boundary conditions. This method is simpler and easier than the method of superposition.

Key words: hybrid stress element, basic deformation mode, assumed stress mode, mode orthogonality, suppression of zero-energy deformation mode

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals
Total visitors:
Copyright © Applied Mathematics and Mechanics (English Edition)
Address：P. O. Box 122, Shanghai University, 99 Shangda Road, Shanghai 200444, China
E-mail： amm@department.shu.edu.cn
Technical support: Beijing Magtech Co.ltd support@magtech.com.cn