A novel way for vibration control of FGM fluid-conveying pipes via NiTiNOL-steel wire rope

doi:10.1007/s10483-023-3008-7

摘要/Abstract

摘要： In this study, a coupling model of fluid-conveying pipes made of functionally graded materials (FGMs) with NiTiNOL-steel (NiTi-ST) for vibration absorption is investigated. The vibration responses of the FGM fluid-conveying pipe with NiTi-ST are studied by the Galerkin truncation method (GTM) and harmonic balance method (HBM). The harmonic balance solutions and the numerical results are consistent. Also, the linearized stability of the structure is determined. The effects of the structure parameters on the absorption performance are also studied. The results show that the NiTi-ST is an effective means of vibration absorption. Furthermore, in studying the effect of the NiTi-ST, a closed detached response (CDR) is first observed. It is noteworthy that the CDR may dramatically change the vibration amplitude and that the parameters of the NiTi-ST may determine the emergence or disappearance of the CDR. This vibration absorption device can be extended to offer more general vibration control in engineering applications.

关键词: NiTiNOL-steel (NiTi-ST), functionally graded material (FGM) fluid-conveying pipe, vibration absorption, harmonic balance method (HBM), closed detached response (CDR)

Abstract: In this study, a coupling model of fluid-conveying pipes made of functionally graded materials (FGMs) with NiTiNOL-steel (NiTi-ST) for vibration absorption is investigated. The vibration responses of the FGM fluid-conveying pipe with NiTi-ST are studied by the Galerkin truncation method (GTM) and harmonic balance method (HBM). The harmonic balance solutions and the numerical results are consistent. Also, the linearized stability of the structure is determined. The effects of the structure parameters on the absorption performance are also studied. The results show that the NiTi-ST is an effective means of vibration absorption. Furthermore, in studying the effect of the NiTi-ST, a closed detached response (CDR) is first observed. It is noteworthy that the CDR may dramatically change the vibration amplitude and that the parameters of the NiTi-ST may determine the emergence or disappearance of the CDR. This vibration absorption device can be extended to offer more general vibration control in engineering applications.

Key words: NiTiNOL-steel (NiTi-ST), functionally graded material (FGM) fluid-conveying pipe, vibration absorption, harmonic balance method (HBM), closed detached response (CDR)

中图分类号:

74H10

Jian ZANG, Ronghuan XIAO, Yewei ZHANG, Liqun CHEN. A novel way for vibration control of FGM fluid-conveying pipes via NiTiNOL-steel wire rope[J]. Applied Mathematics and Mechanics (English Edition), 2023, 44(6): 877-896.

参考文献

[1] PAÏDOUSSIS, M. P. The canonical problem of the fluid-conveying pipe and radiation of the knowledge gained to other dynamics problems across applied mechanics. Journal of Sound and Vibration, 310, 462–492(2008)
[2] LI, W. C., VAZIRI, V., APHALE, S. S., DONG, S., and WIERCIGROCH, M. Dynamics and frequency and voltage control of downhole oil pumping system. Mechanical Systems and Signal Processing, 139, 106562(2020)
[3] PAÏDOUSSIS, M. P. and ISSID, N. T. Dynamic stability of pipes conveying fluid. Journal of Sound and Vibration, 33, 267–294(1974)
[4] PAÏDOUSSIS, M. P. and LI, G. X. Pipe conveying fluid: a dynamical model problem. Journal of Fluids and Structure, 7, 137–204(1993)
[5] PAÏDOUSSIS, M. P. Some unresolved issues in fluid-structure interactions. Journal of Fluids and Structures, 20, 871–890(2005)
[6] PENG, G., XIONG, Y., GAO, Y., LIU, L., WANG, M., and ZHANG, Z. Nonlinear dynamics of a simply supported fluid-conveying pipe subjected to motion-limiting constraints: two-dimensional analysis. Journal of Sound and Vibration, 435, 192–204(2018)
[7] TAN, X., MAO, X. Y., DING, H., and CHEN, L. Q. Vibration around non-trivial equilibrium of a supercritical Timoshenko pipe conveying fluid. Journal of Sound and Vibration, 428, 104–118(2018)
[8] LU, Z. Q., ZHANG, K. K., DING, H., and CHEN, L. Q. Internal resonance and stress distribution of pipes conveying fluid in supercritical regime. International Journal of Mechanical Sciences, 186, 105900(2020)
[9] IBRAHIM, R. A. Overview of mechanics of pipes conveying fluid. Journal of Pressure Vessel Technology, 132, 034001(2010)
[10] TAN, X., DING, H., and CHEN, L. Q. Nonlinear frequencies and forced responses of pipes conveying fluid via a coupled Timoshenko model. Journal of Sound and Vibration, 455, 241–255(2019)
[11] MIYAMOTO, Y., NIINO, M., and KOIZUMI, M. FGM research programs in Japan — from structural to functional uses. Functionally Graded Materials, 1996, 1–8(1997)
[12] KIEBACK, B., NEUBRAND, A., and RIEDEL, H. Processing techniques for functionally graded materials. Materials Science and Engineering: A, 362, 81–106(2003)
[13] SU, Z., JIN, G., and YE, T. Three-dimensional vibration analysis of thick functionally graded conical, cylindrical shell and annular plate structures with arbitrary elastic restraints. Composite Structures, 118, 432–447(2014)
[14] SHEN, H., PAÏDOUSSIS, M. P., WEN, J., YU, D., and WEN, X. The beam-mode stability of periodic functionally-graded-material shells conveying fluid. Journal of Sound and Vibration, 333, 2735–2749(2014)
[15] DENG, J., LIU, Y., ZHANG, Z., and LIU, W. Dynamic behaviors of multi-span viscoelastic functionally graded material pipe conveying fluid. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231, 3181–3192(2016)
[16] WANG, Z. M. and LIU, Y. Z. Transverse vibration of pipe conveying fluid made of functionally graded materials using a symplectic method. Nuclear Engineering and Design, 298, 149–159(2016)
[17] LU, Z. Q., ZHANG, K. K., DING, H., and CHEN, L. Q. Nonlinear vibration effects on the fatigue life of fluid-conveying pipes composed of axially functionally graded materials. Nonlinear Dynamics, 100, 1091–1104(2020)
[18] SU, Z., INABA, K., KARMAKAR, A., and DAS, A. Analytical and numerical study of vibration and transient heat conduction in a functionally graded pipe. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 15, 0054(2021)
[19] TONG, G. J., LIU, Y. S., LIU, H. C., and DAI, J. Y. Thermoelastic vibration analysis of microscale functionally graded material fluid-conveying pipes in elastic medium. Journal of Central South University, 26, 2785–2796(2019)
[20] SALEH, B. I. and AHMED, M. H. Development of functionally graded tubes based on pure Al/Al₂O₃ metal matrix composites manufactured by centrifugal casting for automotive applications. Metals and Materials International, 26, 1430–1440(2019)
[21] ZHU, B., XU, Q., LI, M., and LI, Y. Nonlinear free and forced vibrations of porous functionally graded pipes conveying fluid and resting on nonlinear elastic foundation. Composite Structures, 252, 112672(2020)
[22] DING, H., JI, J., and CHEN, L. Q. Nonlinear vibration isolation for fluid-conveying pipes using quasi-zero stiffness characteristics. Mechanical Systems and Signal Processing, 121, 675–688(2019)
[23] DING, H. and CHEN, L. Q. Designs, analysis, and applications of nonlinear energy sinks. Nonlinear Dynamics, 100, 3061–3107(2020)
[24] WANG, G. X., DING, H., and CHEN, L. Q. Performance evaluation and design criterion of a nonlinear energy sink. Mechanical Systems and Signal Processing, 169, 108770(2022)
[25] WANG, G. X. and DING, H. Mass design of nonlinear energy sinks. Engineering Structures, 250, 113438(2022)
[26] GUO, H., YANG, T., CHEN, Y., and CHEN, L. Q. Singularity analysis on vibration reduction of a nonlinear energy sink system. Mechanical Systems and Signal Processing, 173, 109074(2022)
[27] GENG, X. F. and DING, H. Two-modal resonance control with an encapsulated nonlinear energy sink. Journal of Sound and Vibration, 520, 116667(2022)
[28] ZHANG, Y. W., WANG, C., YUAN, B., and FANG, B. Integration of geometrical and material nonlinear energy sink with piezoelectric material energy harvester. Shock and Vibration, 2017, 1987456(2017)
[29] MA, X. and ZHOU, S. A review of flow-induced vibration energy harvesters. Energy Conversion and Management, 254, 115223(2022)
[30] ZHOU, S., LALLART, M., and ERTURK, A. Multistable vibration energy harvesters: principle, progress, and perspectives. Journal of Sound and Vibration, 528, 116886(2022)
[31] HUANG, D., ZHOU, S., LI, R., and YURCHENKO, D. On the analysis of the tristable vibration isolation system with delayed feedback control under parametric excitation. Mechanical Systems and Signal Processing, 164, 108207(2022)
[32] ZHANG, Y. W., ZHANG, Z., CHEN, L. Q., YANG, T. Z., FANG, B., and ZANG, J. Impulseinduced vibration suppression of an axially moving beam with parallel nonlinear energy sinks. Nonlinear Dynamics, 82, 61–71(2015)
[33] NILI AHMADABADI, Z. and KHADEM, S. E. Nonlinear vibration control and energy harvesting of a beam using a nonlinear energy sink and a piezoelectric device. Journal of Sound and Vibration, 333, 4444–4457(2014)
[34] ZHANG, Y. W., ZHANG, H., HOU, S., XU, K. F., and CHEN, L. Q. Vibration suppression of composite laminated plate with nonlinear energy sink. Acta Astronautica, 123, 109–115(2016)
[35] MAMAGHANI, A. E., KHADEM, S. E., and BAB, S. Vibration control of a pipe conveying fluid under external periodic excitation using a nonlinear energy sink. Nonlinear Dynamics, 86, 1761–1795(2016)
[36] PAIVA, A. and SAVI, M. A. An overview of constitutive models for shape memory alloys. Mathematical Problems in Engineering, 2006, 1–30(2006)
[37] OZBULUT, O. E., HURLEBAUS, S., and DESROCHES, R. Seismic response control using shape memory alloys: a review. Journal of Intelligent Material Systems and Structures, 22, 1531–1549(2011)
[38] LESTER, B. T., BAXEVANIS, T., CHEMISKY, Y., and LAGOUDAS, D. C. Review and perspectives: shape memory alloy composite systems. Acta Mechanica, 226, 3907–3960(2015)
[39] MANI, Y. and SENTHILKUMAR, M. Shape memory alloy-based adaptive-passive dynamic vibration absorber for vibration control in piping applications. Journal of Vibration and Control, 21, 1838–1847(2013)
[40] BELHAQ, M., CARBONI, B., and LACARBONARA, W. A new vibration absorber based on the hysteresis of multi-configuration NiTiNOL-steel wire ropes assemblies. MATEC Web of Conferences, 16, 01004(2014)
[41] CARBONI, B., MANCINI, C., and LACARBONARA, W. Hysteretic beam model for steel wire ropes hysteresis identification. Springer Proceedings in Physics, 168, 261–282(2015)
[42] CARBONI, B., LACARBONARA, W., and AURICCHIO, F. Hysteresis of multiconfiguration assemblies of nitinol and steel strands: experiments and phenomenological identification. Journal of Engineering Mechanics, 141, 04014135(2015)
[43] CARBONI, B. and LACARBONARA, W. Nonlinear dynamic characterization of a new hysteretic device: experiments and computations. Nonlinear Dynamics, 83, 23–39(2015)
[44] BREWICK, P. T., MASRI, S. F., CARBONI, B., and LACARBONARA, W. Data-based nonlinear identification and constitutive modeling of hysteresis in nitinol and steel strands. Journal of Engineering Mechanics, 142, 04016107(2016)
[45] CARBONI, B., LACARBONARA, W., BREWICK, P. T., and MASRI, S. F. Dynamical response identification of a class of nonlinear hysteretic systems. Journal of Intelligent Material Systems and Structures, 29, 2795–2810(2018)
[46] BREWICK, P. T., MASRI, S. F., CARBONI, B., and LACARBONARA, W. Enabling reducedorder data-driven nonlinear identification and modeling through naive elastic net regularization. International Journal of Non-Linear Mechanics, 94, 46–58(2017)
[47] LIU, Y., MOJAHED, A., BERGMAN, L. A., and VAKAKIS, A. F. A new way to introduce geometrically nonlinear stiffness and damping with an application to vibration suppression. Nonlinear Dynamics, 96, 1819–1845(2019)
[48] ZANG, J. and ZHANG, Y. W. Responses and bifurcations of a structure with a lever-type nonlinear energy sink. Nonlinear Dynamics, 98, 889–906(2019)
[49] HABIB, G., CIRILLO, G. I., and KERSCHEN, G. Uncovering detachedresonance curves in singledegree-of-freedom. Procedia Engineering, 199, 649–656(2017)
[50] CHEN, J. E., HE, W., ZHANG, W., YAO, M. H., LIU, J., and SUN, M. Vibration suppression and higher branch responses of beam with parallel nonlinear energy sinks. Nonlinear Dynamics, 91, 885–904(2017)
[51] ZANG, J., YUAN, T. C., LU, Z. Q., ZHANG, Y. W., DING, H., and CHEN, L. Q. A lever-type nonlinear energy sink. Journal of Sound and Vibration, 437, 119–134(2018)
[52] ZANG, J., CAO, R. Q., FANG, B., and ZHANG, Y. W. A vibratory energy harvesting absorber using integration of a lever-enhanced nonlinear energy sink and a levitation magnetoelectric energy harvester. Journal of Sound and Vibration, 484, 115534(2020)
[53] ZANG, J., CAO, R. Q., ZHANG, Y. W., FANG, B., and CHEN, L. Q. A lever-enhanced nonlinear energy sink absorber harvesting vibratory energy via giant magnetostrictive-piezoelectricity. Communications in Nonlinear Science and Numerical Simulation, 95, 105620(2021)
[54] ZANG, J., CAO, R. Q., and ZHANG, Y. W. Steady-state response of a viscoelastic beam with asymmetric elastic supports coupled to a lever-type nonlinear energy sink. Nonlinear Dynamics, 105, 1327–1341(2021)
[55] ZHENG, L. H., ZHANG, Y. W., DING, H., and CHEN, L. Q. Nonlinear vibration suppression of composite laminated beam embedded with NiTiNOL-steel wire ropes. Nonlinear Dynamics, 103, 2391–2407(2021)
[56] ZANG, J. and CHEN, L. Q. Complex dynamics of a harmonically excited structure coupled with a nonlinear energy sink. Acta Mechanica Sinica, 33, 801–822(2017)