[1] Hartranft R J, Sih G C. Alternating method applied to edge and surface crack problems[A]. In: G C Sih Ed. Mechanics of Fracture[C]. Vol 1,1973,177-238.
[2] Nisitani H. Stress intensity factor for the tension of a semi-infinite plate having an oblique or a bent edge crack[J]. Trans Japan Soc Mech Engrs, 1975,41(344): 1103-1110.
[3] Hasebe N, Inohara S. Stress analysis of a semi-infinite plate with an oblique edge crack[J]. Ingen Arch, 1980,49(1):51-62.
[4] Hasebe N. An edge crack in semi-infinite plate welded to a rigid stiffener[J]. Proc Japan Soc Civil Engrs, 1981,314(10): 149-157.
[5] Hasbe N, Okumura M, Takeuchi T, et al. Mixed boundary value problem of simple support type in plane elasticity[J]. Acta Mech, 1988,73(1): 199-212.
[6] Okumura M, Hasebe N, Nakamura T. A crack and a debonding at an end of a simple support in plane elasticity[J]. Acta Mech, 1988,74(1):139-153.
[7] Hasebe N, Nakamura T, Ito Y. Analysis of the second mixed boundary value problem for a thin plate[J]. J Appl Mech, 1994,61(3):555-559.
[8] Imai I. Conformal Mapping and Its Application [M]. Tokyo: Iwanami Shoten, 1979.
[9] Mushelishvili N I. Some Basic Problems of Mathematical Theory of Elasticity [M]. Gronigen:Noordhoff, 1953.
[10] Hasebe N, Okumura M, Nakamura T. Bonded bi-materials half-planes with semi-elliptical notch under tension along the interface[J]. J Appl Mech,1992,59(1):77-83.
[11] CHEN Yi-zhou. Elastic analysis of an infinite plate containing hole with cusps and applied by concentrated forces[J]. Engng Fract Mech, 1984,20(4):573-582.
[12] Hasebe N, Chen Y Z. Interaction between a hole edge crack and a line crack[J]. Iht J Fract,1996,77(4):351-366.
[13] Hasebe N, Horiuchi Y. Stress analysisfor a strip with semi-elliptical notches or cracks on both sides by means of rational mapping function[J]. Ingen arch, 1978,47: 169-179.
[14] Hasebe N, Natsuura S. Stress analysis of a strip with a step and a crack[J]. Engng Fract Mech,1984,20(3):447-460. |
Email Alert
RSS