| [1] Sih,C.F.et al,Fully plastic crack problems part 1:solutions by a penalty method,Transactions of the ASME,Journal of Applied Mechanics 51,1 March(1984),48-56.
[2] Irwin,G.R.,Crack-extension for partthrough crack in a plate,Trans.Am.Soc.Mech.Engrs.JAM.29,(1962),651-654.
[3] Shan,R.C.and A.S.Kobayashi Crack approaching the surface of a plate in bending,ASTM.STP 513(1972).
[4] Orang,T.W.,Fracture of thin section containing through and partthrough Crack,ASTM.STP 496(1971),61-81.
[5] Erdogan,F.Ductile fracture theories for pressurized pipes and containers,Inter.J Pres.Ves.Pip.4,(1976),253-284.
[6] ASTM Committe,The slow grouth and rapid propagation of cracks,Materials Res.and Standards,1(1961),389-394.
[7] Irwin,G.R.,Fracture of Pressure Vessels,Materials for Missles and Spacecraft,McGraw-Hill(1963),204-229.
[8] Irwin,G.R.and J.E.Srawley,Progress in the development of crack toughness fracture tests,Material Prufung,4,(1962),1-11.
[9] Dixon,J.R.,Stress and strain distributions around cracks in sheet materials having various work hardening characteristics,Int.J Fract.Meth.,1(1965),224-243.
[10] Ruedl,E.,Void fromation at the interface between particles and matrix in deformed al-al2O3 foils J Mat.Scien.4(1969) 814-815,
[11] Broek,D.,On the formation of fatique striations,Int.J.Fract.Mech.,8(1972),75-86.
[12] Underwood,J.H.,Measurement of microscopic plastic-strain distributions in the region of a crack tip,Exp.Mech.(1969),296-304.
[13] Hahn,G.T.and A.R.,Rosenfield Plastic zones generated by cracks growing under load,Inter.Jou.Fract.Mech.,4(1968).
[14] Hahn,G.T.and A.R.Rosenfield,Local yielding and extension of a crack under plane stress,Acta.Met.,13(1965),293-306.
[15] Ai Qing-fa et al.,Fracture analysis of missile firebox with internal surface cracks,Applied Mechanics,press of COISAMS,1,(1980),152. (In chinese)
[16] Xie Jing-yi et al.,Explosive experiment and theory analysis of the Zr-4 alloy tube with surface cracks,Symposium of the Third China Fracture Mechanics,2(1981),159. (in Chinese)
[17] Anon.,EPRI ductile fracture research reviews document,Norris D.M.,et al.,ed.,NP-80-10-LD Special Study Project WS80-912,Workshop Report,Electric Power Research Institute,Palo Alto,Calif,Dec.(1980).
[18] Kumar,V.et al.,An engineering approach for elastic-plastic fracture analysis,EPRI Topical Report NP-1931,Electric Power Research Institute,Palo Alto,Calif,July(1981).
[19] Sih,C.F.et al.,An engineering approach for examining crack growth and stability in flawed stractures,International Journal of Pressure Vessel and Piping,9(1981),159-196.
[20] Goldman,N.L.,et al.,Fully plastic crack problems:the center-cracked strip under plane strain,International Journal of Solids and Stractures,11(1975),575-591.
[21] Shih,C.F.et al.,Full plastic solutions and large scale yielding estimates for plane stress crack problems,ASME Journal of Engineering Materials and Technolegy,98(1976),289-295.
[22] Weedleman,A.,et al.,Finite element method for plane strain deformations of incompressible solids,Computer Method in Applied Mechanics and Engineering,15(1978),223-240.
[23] Hutchinson,J.W.,et al.,Fully plastic crack problems in bending and tension,in Frature Mechanics,Perrone,N et al.,eds.Uni.Press of Virginia,Charlottesville(1978),515-528. |
Email Alert
RSS