Applied Mathematics and Mechanics >
Free vibration of functionally graded sandwich plates using four-variable refined plate theory
Received date: 2010-10-18
Revised date: 2011-04-11
Online published: 2011-07-03
This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free
surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton’s principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-order theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.
L. HADJI;H. A. ATMANE;A. TOUNSI;I. MECHAB;E.A.ADDABEDIA . Free vibration of functionally graded sandwich plates using four-variable refined plate theory[J]. Applied Mathematics and Mechanics, 2011 , 32(7) : 925 -942 . DOI: 10.1007/s10483-011-1470-9
[1] Plantema, F. J. Sandwich Construction: The Bending and Buckling of Sandwich Beam, Plates
and Shells, John Wiley and Sons, New York (1966)
[2] Allen, H. G. Analysis and Design of Structural Sandwich Panels, Pergamon Press, Oxford (1969)
[3] Whitney, J. M. Structural Analysis of Laminated Anisotropic Plates, Technomic, Lancaster (1987)
[4] Zenkert, D. An Introduction to Sandwich Construction, Chameleon Press, London (1995)
[5] Vinson, J. R. The Behavior of Sandwich Structures of Isotropic and Composite Materials, Technomic,
Lancaster (1999)
[6] Pagano, N. J. Exact solutions for rectangular bidirectional composite and sandwich plates. Journal
of Composite Materials, 4(1), 20–34 (1970)
[7] Pagano, N. J. and Hatfield, S. J. Elastic behaviour of multilayered bidirectional composite. AIAA
Journal, 10(12), 931–933 (1972)
[8] Koizumi, M. The concept of FGM. Ceramic Transactions, Functionally Gradient Materials, 34(1),
3–10 (1993)
[9] Suresh, S. and Mortensen, A. Fundamentals of Functionally Graded Materials, IOM Communications,
London (1998)
[10] Koizumi, M. FGM activities in Japan. Composite Part B: Engineering, 28(1-2), 1–4 (1997)
[11] Tanigawa, Y. Some basic thermoelastic problems for nonhomogeneous structural materials. Applied.
Mechanice Reviews, 48(6), 287–300 (1995)
[12] Suresh, S. and Mortensen, A. Functionally graded metals and metal ceramic composites 2: thermomechanical
behaviour. International Materials Reviews., 42(3), 85–116 (1997)
[13] Bao, G. and Wang, L. Multiple cracking in functionally graded ceramic/metal coatings. International
Journal of Solids and Structures, 32(19), 2853–2871 (1995)
[14] Marur, P. R. Fracture Behaviour of Functionally Graded Materials, Ph. D. dissertation, Auburn
University, Alabama (1999)
[15] Williamson, R. L., Rabin, B. H., and Drake, J. T. Finite element analyses of thermal residual
stresses at graded ceramic-metal interfaces—part I: model description and geometrical effects.
Journal of Applied Physics, 74(2), 1310–1320 (1995)
[16] Drake, J. T., Williamson, R. L., and Rabin, B. H. Finite element analysis of thermal residual
stresses at graded ceramic-metal interfaces—part II: interface optimization for residual stress
reduction. Journal of Applied Physics, 74(2), 1321–1326 (1995)
[17] Naotake. N. Thermal stresses in functionally graded materials. Journal of Thermal Stresses, 22(4-
5), 477–512 (1999)
[18] Kesler, O., Finot, M., and Sampath, S. Determination of processing-induced stresses and properties
of layered and graded coatings: experimental method and results for plasma-sprayed Ni-
Al2O3. Acta Materialia, 45(8), 3123–3134 (1997)
[19] Kwon, P. and Crimp, M. Automating the design process and powder processing of functionally
gradient materials. Composites and Functionally Graded Materials, 80, 73–88 (1997)
[20] Reddy, J. N. Analysis of functionally graded plates. International Journal for Numerical Methods
in Engineering, 47(1-3), 663–684 (2000)
[21] Cheng, Z. Q. and Batra, R. C. Exact correspondence between eigenvalues of membranes and
functionally graded simply supported polygonal plates. Journal of Sound and Vibration, 229(4),
879–895 (2000)
[22] Loy, C. T., Lam, K. Y., and Reddy, J. N. Vibration of functionally graded cylindrical shells.
International Journal of Mechanical Sciences, 41(31), 309–324 (1999)
[23] Praveen, G. V. and Reddy, J. N. Nonlinear transient thermoelastic analysis of functionally graded
ceramic-metal plates. International Journal of Solids and Structures, 35(33), 4457–4476 (1998)
[24] Venkataraman, S. and Sankar, B. V. Analysis of sandwich beams with functionally graded core.
Proceedings of the 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and
Materials Conference, Seattle, AIAA-2001-1281, 16–19 (2001)
[25] Anderson, T. A. A 3-D elasticity solution for a sandwich composite with functionally graded core
subjected to transverse loading by a rigid sphere. Composite Structures, 60(3), 265–274 (2003)
[26] Pan, E. and Han, F. Exact solution for functionally graded and layered magneto-electro-elastic
plates. International Journal of Engineering Science, 43(3-4), 321–339 (2005)
[27] Das, M., Barut, A., Madenci, E., and Ambur, D. R. A triangular plate element for thermo-elastic
analysis of sandwich panels with a functionally graded core. International Journal for Numerical
Method in Engineering, 68(9), 940–966 (2006)
[28] Shen, H. S. Postbuckling of FGM plates with piezoelectric actuators under thermo-electromechanical
loadings. International Journal of Solids and Structures, 42(23), 6101–6121 (2005)
[29] Noda, N. Thermal stress in functionally graded materials. Third International Congress on Thermal
Stresses. Thermal Stresses’ 99, Cracow, Poland, 13–17 June (1999)
[30] Li, Q., Iu, V. P., and Kou, K. P. Three-dimensional vibration analysis of functionally graded
material sandwich plates. Journal of Sound and Vibration, 311(112), 498–515 (2008)
[31] Shimpi, R. P. Refined plate theory and its variants. AIAA Journal, 40(1), 137–146 (2002)
[32] Shimpi, R. P. and Patel, H. G. A two-variable refined plate theory for orthotropic plate analysis.
International Journal of Solids and Structures, 43(22), 6783–6799 (2006)
[33] Shimpi, R. P. and Patel, H. G. Free vibrations of plate using two-variable refined plate theory.
Journal of Sound and Vibration, 296(4-5), 979–999 (2006)
[34] Lee, K. H., Senthilnathan, N. R., Lim, S. P., and Chow, S. T. A simple higher-order non-linear
shear deformation plate theory. International Journal of Non-Linear Mechanics, 24(2), 127–137
(1989)
[35] Mechab, I., Ait, A., H., Tounsi, A., Belhadj, H. A., and Adda Bedia, E. A. A two-variable refined
plate theory for bending of functionally graded plates. Acta Mechanica Sinica, 26(6), 941–949
(2010)
[36] Delale, F. and Erdogan, F. The crack problem for a nonhomogeneous plane. Journal of Applied
Mechanics, 50(6), 609–614 (1983)
[37] Reddy, J. N. Energy and Variational Methods in Applied Mechanics, John Wiley and Sons, New
York (1984)
[38] Leissa, A. W. and Narita, Y. Vibration studies for simply supported symmetrically laminated
rectangular plates. Composite Structures, 12(2), 113–132 (1989)
[39] Baharlou, B. and Leissa, A. W. Vibration and buckling of generally laminated composite plates
with arbitrary boundary conditions. Inter national Journal of Mechanical Sciences, 29(8), 545–555
(1987)
[40] Qatu, M. S. Free vibration of laminated composite rectangular plates. International Journal of
Solids and Structures., 28, 941–954 (1991)
[41] Messina, A. and Soldatos, K. P. Influence of edge boundary conditions on the free vibrations of
cross-ply laminated circular panels. Journal of the Acoustical Society of America, 106(5), 2608–
2620 (1999)
[42] Bhat, R. B. Natural frequencies of rectangular plates using characteristics orthogonal polynomials
in Rayleigh-Ritz method. Journal of Sound and Vibration, 102(4), 493–499 (1985)
[43] Dickinson, S. M. and Blasio, X. On the use of orthogonal polynomials in the Rayleigh-Ritz method
for the study of the flexural vibration and buckling of isotropic and orthotropic rectangular plates.
Journal of Sound and Vibration, 108(1), 51–62 (1986)
[44] Narita, Y. Combinations for the free-vibration behaviors of anisotropic rectangular plates under
general edge boundary conditions. Journal of Applied Mechanics, 67(3), 568–573 (2000)
/
| 〈 |
|
〉 |
Email Alert
RSS