Cheng-wu JIN;Li-zhong WANG;Yong-qiang ZHANG . Strength differential effect and influence of strength criterion on burst pressure of thin-walled pipelines[J]. Applied Mathematics and Mechanics, 2012 , 33(11) : 1361 -1370 . DOI: 10.1007/s10483-012-1628-7

[1] Faupel, J. H. Yielding and bursting characteristics of heavy walled cylinders. Trans. ASME J.Appl. Mech., 78(5), 1031-1064 (1956)
[2] Svensson, N. L. Bursting pressure of cylindrical and spherical pressure vessels. Trans. ASME J.Appl. Mech., 80(3), 89-96 (1958)
[3] Folias, E. S. An axial crack in a pressurized cylindrical shell. Int. J. Fract. Mech., 1, 104-113(1965)
[4] Harvey, J. F. Theory and Design of Modern Pressure Vessels, 2nd ed., Van Nostrand ReinholdCompany, New York (1974)
[5] Yeh, M. K. and Kyriakides, S. On the collapse of inelastic thick-walled tubes under externalpressure. Journal of Energy Resource Technology, 108, 35-47 (1986)
[6] Miller, A. G. Review of limit loads of structures containing defects. Int. J. Pres. Ves. Pip., 32,197-327 (1988)
[7] Mok, D. H. B., Pick, R. J., Glover, A. J., and Hoff, R. Bursting of line pipe with long externalcorrosion. Int. J. Pres. Ves. Pip., 46, 195-215 (1991)
[8] Kyriakides, S., Park, T. D., and Netto, T. A. On the design of integral buckle arrestors for offshorepipelines. Appl. Ocean Res., 20, 95-104 (1998)
[9] Chen, Z. P., Zheng, J. Y., and Sun, G. Y. Bursting pressure test of ABS engineering plastics pipe.China Plastics Industry, 28(5), 36-38 (2000)
[10] Zheng, C. X. and Wen, Q. Explosive experiment of mild steel pressure vessel and research onformula of explosive stress. Pres. Ves. Technol., 19(9), 9-12 (2002)
[11] Zhu, X. K. and Leis, B. N. Theoretical and numerical predictions of burst pressure of pipelines.J. Pres. Ves. Technol., 129, 644-652 (2007)
[12] Netto, T. A., Ferraz, U. S., and Estefen, S. F. The effect of corrosion defects on the burst pressureof pipelines. J. Construct. Steel Res., 61, 1185-1204 (2005)
[13] Law, M. and Bowie, G. Prediction of failure strain and burst pressure in high yield-to-tensilestrength ratio linepipe. Int. J. Pres. Ves. Pip., 84, 487-492 (2007)
[14] Chattopadhyay, J., Kushwaha, H. S., and Roos, E. Improved integrity assessment equations ofpipe bends. Int. J. Pres. Ves. Pip., 86(7), 454-473 (2009)
[15] Law, M., Bowie, G., and Fletcher, L. Burst pressure and failure strain in pipeline, part 2: comparisonof burst pressure and failure-strain formulas. Journal of Pipeline Integrity, 3, 102-106(2004)
[16] Christopher, T, Rama-Sarma, B. S. V., Potti, P. K. G., Rao, B. N., and Sankarnarayanasamy, K.A comparative study on failure pressure estimations of unflawed cylindrical vessels. Int. J. Pres.Ves. Pip., 79, 53-66 (2002)
[17] Cooper, W. E. The significance of the tensile test to pressure vessel design. Weld. J. Res. Suppl.,36, 49-56 (1957)
[18] Hiller, M. J. Tensile plastic instability of thin tubes. J. Mech. Eng. Sci., 4, 251-256 (1962)
[19] Updike, D. P. and Kalnins, A. Tensile plastic instability of axisymmetric pressure vessels. J. Pres.Ves. Technol., 120, 6-11 (1998)
[20] Stewart, G. and Klever, F. J. An analytical model to predict the burst capacity of pipelines.Proceedings of the 13th International Conference of Offshore Mechanics and Arctic Engineering,The Society, New York, 177-188 (1994)
[21] Zhu, X. K. and Leis, B. N. Average shear stress yield criterion and its application to plasticcollapse analysis of pipelines. Int. J. Pres. Ves. Pip., 83, 663-671 (2006)
[22] Feng, J. J., Zhang, J. Y., Zhang, P., Tan, Y. Q., and Han, L. F. Limit analysis of thick-walledtubes in complex stress state (in Chinese). Journal of Engineering Mechanics, 21, 188-192 (2004)
[23] Yu, M. H. and He, L. N. A new model and theory on yield and failure of materials under complexstress state. Mechanical Behaviour of Materials, 3, 841-846 (1991)
[24] Fan, S. C., Yu, M. H., and Yang, S. Y. On the unification of yield criteria. Trans. ASME J. Appl.Mech., 68, 341-343 (2002)
[25] Yu, M. H. Advance in strength theory of material and complex stress state in the 20th century.Appl. Mech. Rev., 55(3), 169-218 (2002)
[26] Yu, M. H. Twin shear stress yield criterion. Int. J. Mech. Sci., 25(1), 71-74 (1983)
[27] Jonas, J. J., Holt, R. A., and Coleman, C. E. Plastic instability in tension and compression. ActaMetallurgica, 24, 911-918 (1976)
[28] Crossland, B. and Bones, J. A. The ultimate strength of thick walled cylinders subjected to internalpressure. Engineering, 179, 80-83 (1955)
[29] Costantino, C. J. The strength of thin-walled cylinders subjected to dynamic internal pressures.Trans. ASME J. Appl. Mech., 32, 104-107 (1965)
[30] Hill, R. The Mathematical Theory of Plasticity, Oxford University Press, London (1950)
[31] Zhu, X. K. and Leis, B. N. Strength criteria and analytic predictions of failure pressures in linepipes. International Society of Offshore and Polar Engineers, 14, 125-131 (2004)
[32] Li, X. W., Zhao, J. H., and Wang, Q. Y. Unified stresses solution for sheet forming. Adv. Mater.Res., 463-464, 629-633 (2012)