Applied Mathematics and Mechanics >
MHD flow of upper-convected Maxwell fluid over porous stretching sheet using successive Taylor series linearization method
Received date: 2011-06-10
Revised date: 2012-03-20
Online published: 2012-08-10
This paper investigates the magnetohydrodynamic (MHD) boundary layer flow of an incompressible upper-convected Maxwell (UCM) fluid over a porous stretching surface. Similarity transformations are used to reduce the governing partial differential equations into a kind of nonlinear ordinary differential equations. The nonlinear prob- lem is solved by using the successive Taylor series linearization method (STSLM). The computations for velocity components are carried out for the emerging parameters. The numerical values of the skin friction coefficient are presented and analyzed for various parameters of interest in the problem.
S. S. MOTSA;T. HAYAT;O. M. ALDOSSARY . MHD flow of upper-convected Maxwell fluid over porous stretching sheet using successive Taylor series linearization method[J]. Applied Mathematics and Mechanics, 2012 , 33(8) : 975 -990 . DOI: 10.1007/s10483-012-1599-x
[1] Lazurkin, J. S. Cold-drawing of glass-like and crystalline polymers. Journal of Polymer Science,30, 595-604 (1958)
[2] Ginzburg, B. M. On the cold drawing of semicrystalline polymers. Journal of MacromolecularScience, Part B, 44, 217-223 (2005)
[3] Casas, F., Alba-Simionesco, C., Lequeux, F., and Montes, H. Cold drawing of ploymers: plasticityand aging. Journal of Non-Crystalline Solids, 352, 5076-5080 (2006)
[4] Crane, L. J. Flow past a stretching plate. Zeitschrift für Angewandte Mathematik und Physik(ZAMP), 21, 645-647 (1970)
[5] Wang, C. Y. Fluid flow due to stretching cylinder. Physics of Fluids, 31, 466-468 (1988)
[6] Wang, C. Y. Stretching a surface in a rotating fluid. Zeitschrift für Angewandte Mathematik undPhysik (ZAMP), 39, 177-185 (1988)
[7] Gupta, P. S. and Gupta, A. S. Heat and mass transfer on a stretching sheet with suction orblowing. Canadian Journal of Chemical Engineering, 55, 744-746 (1977)
[8] Dandapat, B. S., Kitamura, A., and Santra, B. Transient film profile of thin liquid film flow ona stretching surface. Zeitschrift für Angewandte Mathematik und Physik (ZAMP), 57, 623-635(2006)
[9] Santra, B. and Dandapat, B. S. Thin film flow over nonlinear stretching sheet. Zeitschrift fürAngewandte Mathematik und Physik (ZAMP), 60, 688-700 (2009)
[10] Chiam, T. C. Heat transfer in a fluid with variable thermal conductivity over a linear stretchingsheet. Acta Mechanica, 129, 63-72 (1998)
[11] Liao, S. J. A new branch of solutions of boundary layer flows over an impermeable stretched plate.International Journal of Heat and Mass Transfer, 48, 2529-2539 (2006)
[12] Mukhopadhyay, S. Effects of thermal radiation on unsteady mixed convection flow and heat trans-fer over a porous stretching surface in porous medium. International Journal of Heat and MassTransfer, 52, 3261-3265 (2009)
[13] Parsad, K. V., Pal, D., and Datti, P. S. MHD power-law fluid flow and heat transfer over a non-isothermal stretching sheet. Communications in Nonlinear Science and Numerical Simulation, 14,2178-2189 (2009)
[14] Fang, T. and Zhong, Y. Viscous flow over a stretching sheet with an arbitrary surface velocity.Communications in Nonlinear Science and Numerical Simulation, 15, 3768-3776 (2010)
[15] Ishak, A., Nazar, R., and Pop, I. Mixed convection stagnation point flow of a micropolar fluidtowards a stretching sheet. Meccanica, 43, 411-418 (2008)
[16] Ishak, A. Thermal boundary layer flow over a stretching sheet in a micropolar fluid with radiationeffect. Meccanica, 45, 367-373 (2010)
[17] Abel, M. S., Siddheshwar, P. G., and Mahesha, N. Numerical solution of the momentum and heattransfer equations for a hydromagnetic flow due to a stretching sheet of a nonuniform propertymicropolar liquid. Applied Mathematics and Computation, 217, 5895-5909 (2011)
[18] Pahlavan, A. A., Aliakbar, V., Farahani, F. V., and Sadeghy, K. MHD flow of UCM fluids abovestretching sheet using two-auxiliary-parameter homotopy analysis method. Communications inNonlinear Science and Numerical Simulation, 14, 473-488 (2009)
[19] Pahlavan, A. A., Aliakbar, V., and Sadeghy, K. The influence of thermal radiation on MHD flowof Maxwellian fluid above stretching sheet. Communications in Nonlinear Science and NumericalSimulation, 14, 779-794 (2009)
[20] Hayat, T., Abbas, Z., and Sajid, M. MHD stagnation-point flow of an upper-convected Maxwellfluid over a stretching surface. Chaos, Solitons and Fractals, 39, 840-848 (2009)
[21] Makukula, Z. G., Sibanda, P., and Motsa, S. S. A novel numerical technique for two-dimensionallaminar flow between two moving porous walls. Mathematical Problems in Engineering, 2010,528956 (2010) DOI 10.1155/2010/528956
[22] Makukula, Z. G., Sibanda, P., and Motsa, S. S. A note on the solution of the von Karman equationsusing series and Chebyshev spectral methods. Boundary Value Problems, Article ID 471793, 17pages (2010) DOI 10.1155/2010/471793
[23] Makukula, Z. G., Sibanda, P., and Motsa, S. S. On new solutions for heat transfer in a visco-elastic fluid between parallel plates. International Journal of Mathematical Models and Methodsin Applied Sciences, 4, 221-230 (2010)
[24] Motsa, S. S. and Shateyi, S. A new approach for the solution of three-dimensional magnetohy-drodynamic rotating flow over a shrinking sheet. Mathematical Problems in Engineering, 2010,586340 (2010) DOI 10.1155/2010/586340
[25] Shateyi, S. and Motsa, S. S. Variable viscosity on magnetohydrodynamic fluid flow and heattransfer over an unsteady stretching surface with Hall effect. Boundary Value Problems, 2010,257568 (2010) DOI 10.1155/2010/257568
[26] Canuto, C., Hussaini, M. Y., Quarteroni, A., and Zang, T. A. Spectral Methods in Fluid Dynamics,Springer-Verlag, Berlin (1988)
[27] Trefethen, L. N. Spectral Methods in MATLAB, SIAM, Philadelphia, 51-75 (2000)
[28] Alizadeh-Pahlavan, A., Aliakbar, V., Vakili-Farahani, F., and Sadeghy, K. MHD flows of UCMfluids above porous stretching sheets using two-auxiliary-parameter homotopy analysis method.Communications in Nonlinear Science and Numerical Simulations, 14, 473-488 (2009)
/
| 〈 |
|
〉 |