J. C. UMAVATHI;J. PRATHAP KUMAR;JAWERIYA SULTANA . Mixed convection flow in vertical channel with boundary conditions of third kind in presence of heat source/sink[J]. Applied Mathematics and Mechanics, 2012 , 33(8) : 1015 -1034 . DOI: 10.1007/s10483-012-1602-8

[1] Aung, W. and Worku, G. Theory of fully developed, combined convection including flow reversal.ASME Journal of Heat Transfer, 108, 485-588 (1986)
[2] Hamadah, T. T. and Wirtz, R. A. Analysis of laminar fully developed mixed convection in avertical channel with opposing buoyancy. ASME Journal of Heat Transfer, 113, 507-510 (1991)
[3] Cheng, C. H., Kou, H. S., and Huang, W. H. Flow reversal and heat transfer of fully developedmixed convection in vertical channels. Journal of Thermophysics and Heat Transfer, 4, 375-383(1990)
[4] Barletta, A. Laminar mixed convection with viscous dissipation in a vertical channel. InternationalJournal of Heat and Mass Transfer, 41, 3501-3513 (1998)
[5] Zanchini, E. Effect of viscous dissipation on mixed convection in a vertical channel with boundaryconditions of the third kind. International Journal of Heat and Mass Transfer, 41, 3949-3959(1998)
[6] Sparrow, E. M. Analysis of Laminar Forced-Convection Heat Transfer in the Entrance Region ofFlat Rectangular Ducts, Washington Technical Note, National Advisory Committee for Aeronautics,Vol. 3331 (1955)
[7] Stephan, K. Warmenbergang a Druckabfall Bei nicht ausgebildeter laminarstromung in Rohrenund in ebenen spalten. Chemie Ingeniear Technik, 31, 773-778 (1959)
[8] Hwang, C. L. and Fan, L. T. Finit difference analysis of forced convection heat transfer in entranceregion of a flat rectangular duct. Applied Scientific Research, 13, 401-422 (1964)
[9] Siegal, R. and Sparrow, E. M. Simultaneous development of velocity and temperature distributionsin a flat duct with uniform wall heating. American Institute of Chemical Engineers Journal, 5,73-75 (1959)
[10] Javeri, V. Heat transfer in laminar entrance region of a flat channel for the temperature boundarycondition of the third kind. W╝rme-und Stoff╱bertragung, 10, 137-144 (1977)
[11] Javeri, V. Laminar heat transfer in a rectangular channel for the temperature boundary conditionof the third kind. International Journal of Heat and Mass Transfer, 10, 1029-1034 (1978)
[12] Kumari, M. and Nath, G. Mixed convection boundary layer flow over a thin vertical cylinder withlocalized injection/suction and cooling/heating. International Journal of Heat and Mass Transfer,47, 969-976 (2004)
[13] Umavathi, J. C., Mallikarjun, P. B., and Pop, I. On laminar mixed convection flow in a verticalporous stratum with symmetric wall heating conditions. International Journal of TransportPhenomena, 8, 127-140 (2006)
[14] Mahanthi, N. C. and Gaur, P. Effect of varying and thermal conductivity on steady free convectiveflow and heat transfer along an isothermal vertical plate in the presence of heat sink. Journal ofApplied Fluid Mechanics, 2(1), 23-28 (2009)
[15] Umavathi, J. C. and Prathap Kumar, J. Mixed convection flow of micropolar fluid in a verticalchannel with symmetric and asymmetric wall heating conditions. International Journal of AppliedMechanics and Engineering, 16(1), 141-159 (2010)
[16] Arpaci, V. S. and Larsen, P. S. Convection Heat Transfer, Pentice-Hall/Englewood Cliffs, NewJersey, 51-54 (1984)
[17] Aziz, A. and Na, T. Y. Perturbation Methods in Heat Transfer, Hemisphere Publishing Corporation,New York (1984)