Hua-biao ZHANG;Yu-shu CHEN;Jun LI . Bifurcation on synchronous full annular rub of rigid-rotor elastic-support system[J]. Applied Mathematics and Mechanics, 2012 , 33(7) : 865 -880 . DOI: 10.1007/s10483-012-1591-7

[1] Yan, L. T. Vibration and Vibration Reduction of Aero Gas Turbine (in Chinese), National DefenseIndustrial Press, Beijing (1991)
[2] Wang, D. Y. Rubbing between rotor and stator of rotation machinery (in Chinese). Aero Engine,2, 37-41 (1998)
[3] Ehrich, F. F. High order subharmonic response of high speed rotors in bearing clearance. Journalof Vibration, Acoustics, Stress, and Reliability in Design, 110(1), 9-16 (1988)
[4] Li, Q. H. and Lu, Q. S. Single rub-impacting periodic motions of a rigid constrained rotor system.Communication of Nonlinear Science & Numerical Simulation, 4, 158-161 (2000)
[5] Chu, F. L., Tang, X. Y., and Tang, Y. Stability of a rub-impact rotor system (in Chinese). Journalof Tsinghua University (Science and Technology), 40, 119-123 (2000)
[6] Kim, Y. B. and Noah, S. T. Bifurcation analysis for a modified Jeffcott rotor with bearing clear-ances. Nonlinear Dynamics, 1, 221-241 (1990)
[7] Kim, Y. B. and Noah, S. T. Quasi-periodic response and stability analysis for a nonlinear Jeffcottrotor. Journal of Sound and Vibration, 190(2), 239-253 (1996)
[8] Khanlo, M. H., Ghayour, M., and Rad, Z. S. Chaotic vibration analysis of rotating, flexible,continuous shaft-disk system with a rub-impact between the disk and the stator. Communicationsin Nonlinear Science & Numerical Simulation, 16(1), 566-582 (2011)
[9] Muszynska, A. and Goldman, P. Chaotic responses of unbalanced rotor/bearing/stator systemswith looseness or rubs. Chaos, Solitons & Fractals, 5(9), 1683-1704 (1995)
[10] Chang-Jian, C. W. and Chen, C. K. Chaos of rub-impact rotor supported by bearings withnonlinear suspension. Tribology International, 42(3), 426-439 (2009)
[11] Qin, W. Y., Chen, G. R., and Meng, G. Nonlinear responses of a rub-impact overhung rotor.Chaos, Solitons & Fractals, 19(5), 1161-1172 (2004)
[12] Jiang, J., Shang, Z. Y., and Hong, L. Characteristics of dry friction backward whirl—a self-excitedoscillation in rotor-to-stator contact systems. Science China Technological Sciences, 53(3), 674-683 (2010)
[13] Wilkes, J. C., Childs, D. W., and Dyck, B. J. The numerical and experimental characteristicsof multimode dry-friction whip and whirl. Journal of Engineering for Gas Turbines and Power,132(5), 785-794 (2010)
[14] Yu, J. J. On occurrence of reverse full annular rub. Journal of Engineering for Gas Turbines andPower, 134(1), 219-227 (2012)
[15] Patel, T. H. and Darpe, A. K. Coupled bending-torsional vibration analysis of rotor with rub andcrack. Journal of Sound and Vibration, 326(3-5), 740-752 (2009)
[16] Luo, Y. G., Ren, Z. H., Ma, H., Yu, T., and Wen, B. C. Stability of periodic motion on therotor-bearing system with coupling faults of crack and rub-impact. Journal of Mechanical Scienceand Technology, 21(6), 860-864 (2007)
[17] Ehehalt, U., Markert, R., and Wegener, G. Stability of synchronous forward whirl at rotor-stator-contact. ISROMAC-9 Conference, Honolulu, Hawaii, 1-8 (2002)
[18] Ehehalt, U. and Markert, R. Instability of unbalance excited synchronous forward whirl at rotor-stator-contact. Proceedings of the Applied Mathematics and Mechanics, 2(1), 60-61 (2003)
[19] Black, H. F. Interaction of a whirling rotor with a vibrating stator across a clearance annulus.International Journal of Mechanical Engineering Science, 10, 1-12 (1968)
[20] Begg, I. C. Friction induced rotor whirl—a study in stability. Journal of Engineering for Industry,Transactions of the ASME, 96(2), 450-454 (1974)
[21] Stackley, S. J. Dynamics of Full Annular Rotor Rub, M. Sc. dissertation, Massachusetts Instituteof Technology, USA (1986)
[22] Yu, J. J., Goldman, P., and Bently, D. E. Rotor/seal experimental and analytical study on fullannular rub. ASME Journal of Engineering Gas Turbine Power, 124, 340-350 (2002)
[23] Muszynska, A. Rotordynamics, CRC Press, Florida (2005)
[24] Bently, D. E., Yu, J. J., and Goldman, P. Full annular rub in mechanical seals, part I: experimentresults. ISROMAC-8 Conference, Honolulu, Hawaii, 995-1002 (2000)
[25] Bently, D. E., Yu, J. J., and Goldman, P. Full annular rub in mechanical seals, part II: analyticalstudy. ISROMAC-8 Conference, Honolulu, Hawaii, 1003-1010 (2000)
[26] Choi, Y. S. Investigation on the whirling motion of full annular rotor rub. Journal of Sound andVibration, 258, 191-198 (2002)
[27] Ma, J. M., Zhang, W., and Zheng, T. S. Analysis for rub-impact condition of Jeffcott rotor (inChinese). Grinder Grinding, S1, 68-70 (2003)
[28] Ma, J. M., Zhang, W., and Zheng, T. S. Influence of rotor system parameters on critical rotationspeed for rubbing (in Chinese). Journal of Southwest Jiaotong University, 38, 537-539 (2003)
[29] Jiang, J. and Ulbrich, H. Dynamics and stability of rotor/stator systems with rubs. ASME Paper,No. 2000-GT-390 (2000)
[30] Jiang, J. and Ulbrich, H. Stability analysis of sliding whirl in a nonlinear Jeffcott rotor withcross-coupling stiffness coefficients. Nonlinear Dynamics, 24(3), 269-283 (2001)
[31] Xu, B., Xu, W. N., and Zhang, W. Study of synchronous full annular rub of Jeffcott rotor andits dynamic stability (in Chinese). Journal of Fudan University (Natural Science), 45, 148-154(2006)
[32] Zhang, G. F., Xu, W. N., Xu, B., and Zhang, W. Analytical study of nonlinear synchronous fullannular rub motion of flexible rotor-stator system and its dynamic stability. Nonlinear Dynamics,57, 579-592 (2009)
[33] Xu, W. N., Zhang, W., and Xu, B. Analytical study of synchronous full annular rub motion offlexible stator and rotor system (in Chinese). Journal of Vibration and Shock, 25, 1-9 (2007)
[34] Liu, X. D., Li, Q. H., and Yang, S. P. The stability and Hopf bifurcation in the annular impact-rubof rotating machinery with imbalance (in Chinese). Journal of Vibration Engineering, 12, 40-46(1999)
[35] Groll, G. V. and Ewins, D. J. The harmonic balance method with arc-length continuation inrotor/stator contact problems. Journal of Sound and Vibration, 241(2), 223-233 (2001)
[36] Jiang, J. and Ulbrich, H. Stability analysis of full annular rub in rotor-to-stator systems. Proceedingsof the Applied Mathematics and Mechanics, 2(1), 88-89 (2003)
[37] Shang, Z. Y., Jiang, J., and Hong, L. The influence of the cross-coupling effects on the dynamics ofrotor/stator rubbing. Proceedings of the Second Conference on Dynamics, Vibration and Control,Chendu, China (2009)
[38] Xie, H., Flowers, G. T., Feng, L., and Lawrence, C. Steady state dynamic behavior of a flexi-ble rotor with auxiliary support from a clearance bearing. Journal of Vibration and Acoustics,Transactions of the ASME, 121(1), 78-83 (1999)
[39] Cole, M. O. T. On stability of rotordynamic systems with rotor-stator contact interaction. Proceedingsof the Royal Society A: Mathematical, Physical and Engineering Sciences, 464(2100),3353-3375 (2008)
[40] Keogh, P. S. and Cole, M. O. T. Rotor vibration with auxiliary bearing contact in magnetic bearingsystems, part I: synchronous dynamics. Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science, 217(4), 377-392 (2003)
[41] Sahinkaya, M. N., Abulrub, A. H. G., and Keogh, P. S. Multiple sliding and rolling contact dy-namics for a flexible rotor/magnetic bearing system. IEEE/ASME Transactions on Mechatronics,12(2), 179-189 (2007)
[42] Zhong, Y. E., He, Y. Z., and Wang, Z. Rotor Dynamics (in Chinese), Tstinghua University Press,Beijing (1987)
[43] Chen, Y. S. and Leung, A. Y. T. Bifurcation and Chaos in Engineering, Springer, London (1998)
[44] Wu, Z. Q. and Chen, Y. S. Classification of bifurcations for nonlinear dynamical problems withconstraints. Applied Mathematics and Mechanics (English Edition), 23(5), 535-541 (2002) DOI10.1007/BF02437771
[45] Wu, Z. Q. and Chen, Y. S. New bifurcation patterns in elementary bifurcation problems withsingle-side constraint. Applied Mathematics and Mechanics (English Edition), 22(11), 1260-1267(2001) DOI 10.1007/BF02437849
[46] Wu, Z. Q., Ding, R., and Chen, Y. S. Classification of parametric constrained bifurcation. AppliedMathematics and Mechanics (English Edition), 31(2), 135-142 (2010) DOI 10.1007/s10483-010-0201-z
[47] Qin, Z. H., Chen, Y. S., and Li, J. Singularity analysis of a two-dimensional elastic cable with 1:1internal resonance. Applied Mathematics and Mechanics (English Edition), 31(2), 143-150 (2010)DOI 10.1007/s10483-010-0202-z
[48] Li, J. and Chen, Y. S. Transition sets of bifurcation of dynamical system with two state variableswith constraints. Applied Mathematics and Mechanics (English Edition), 33(2), 139-154 (2012)DOI 10.1007/s10483-012-1539-7