Articles

Lattice Boltzmann simulation of natural convection in open end cavity with inclined hot wall

Expand
  • 1. Department of Mechanical Engineering, Shahrood University of Technology, Shahrood 36199 95161, Iran;
    2. Department of Mechanical Engineering, Schulich School of Engineering, Centre for Environmental Engineering for Research and Education, University of Calgary, Calgary T2N 1N4, Canada

Received date: 2014-01-17

  Revised date: 2014-10-08

  Online published: 2015-04-01

Abstract

Natural convection in an open end cavity with a hot inclined wall is simulated based on the lattice Boltzmann method (LBM). The physics of flow and energy transfer in open end cavities are addressed when the hot wall is inclined. The combination of the two topics (open cavity and inclined walls) is the main novelty of the present study. The effects of the angle of the hot inclined wall on the flow field and heat transfer are thoroughly investigated. The Prandtl number is fixed to 0.71 (air). The Rayleigh number and the angle of the hot inclined wall are varied in the range of 104 to 106 and 60? to 85?, respectively. The results are presented for two different aspect ratios, i.e., A = 1 and 2. The results obtained with the LBM are also compared with those of the finite volume method (FVM). The predicted results of the LBM conform to those of the FVM. The results show that by increasing the angle of the hot inclined wall and the aspect ratio of the cavity, the average Nusselt number decreases. The trend of the local Nusselt number on the inclined wall is also discussed.

Cite this article

M. NAZARI;H. SHOKRI;A. A. MOHAMAD . Lattice Boltzmann simulation of natural convection in open end cavity with inclined hot wall[J]. Applied Mathematics and Mechanics, 2015 , 36(4) : 523 -540 . DOI: 10.1007/s10483-015-1928-9

References

[1] Koca, A. Numerical analysis of conjugate heat transfer in a partially open square cavity with a vertical heat source. International Communications in Heat and Mass Transfer, 35, 1385-1395 (2008)
[2] Chan, Y. L. and Tien, C. L. A numerical study of two-dimensional laminar natural convection in a shallow open cavity. International Journal of Heat and Mass Transfer, 28, 603-612 (1985)
[3] Polat, O. and Bilgen, E. A Laminar natural convection in inclined open shallow cavities. International Journal of Thermal Sciences, 41, 360-368 (2002)
[4] Hinojosa, J. F., Cabanillas, R. E., Alvarez, G., and Estrada, C. E. Nusselt number for the natural convection and surface thermal radiation in a square tilted open cavity. International Communications in Heat and Mass Transfer, 32, 1184-1192 (2005)
[5] Bilgen, E. and Muftuoglu, A. Natural convection in an open square cavity with slots. International Communications in Heat and Mass Transfer, 35, 896-900 (2008)
[6] Nouanegue, N., Muftuoglu, A., and Bilgen, E. Conjugate heat transfer by natural convection, conduction and radiation in open cavities. International Journal of Heat and Mass Transfer, 51, 6054-6062 (2008)
[7] Mohamad, A. A. Natural convection in open cavities and slots. Numerical Heat Transfer, 27, 705-716 (1995)
[8] Khanafer, K. and Vafai, K. Buoyancy-driven flow and heat transfer in open-ended enclosures: elimination of the extended boundaries. International Communications in Heat and Mass Transfer, 43, 4087-4100 (2000)
[9] Javam, A. and Armfield, S. W. Stability and transition of stratified natural convection flow in open cavities. Journal of Fluid Mechanics, 445, 285-303 (2001)
[10] Boetcher, S. K. S. and Sparrow, E. M. Buoyancy-induced flow in an open-ended cavity: assessment of a similarity solution and of numerical simulation models. International Journal of Heat and Mass Transfer, 52, 3850-3856 (2009)
[11] He, X., Chen, S., and Doolen, G. D. A novel thermal model for the lattice Boltzmann method in incompressible limit. Journal of Computational Physics, 146, 282-300 (1998)
[12] Chen, S. and Doolen, G. D. Lattice Boltzmann method for fluid flows. Annual Review of Fluid Mechanics, 30, 329-364 (1998)
[13] Succi, S. The Lattice Boltzmann Equation for Fluid Dynamics and Beyond, Oxford University Press, Clarendon (2001)
[14] Mohamad, A. A. Lattice Boltzmann Method: Fundamentals and Engineering Applications with Computer Codes, Springer, London (2011)
[15] Chai, Z. and Zhao, T. S. Lattice Boltzmann model for the convection-diffusion equation. Physical Review E, 87, 063309 (2013)
[16] Aidub, C. K. and Clausen, J. R. Lattice Boltzmann method for complex flows. Annual Review of Fluid Mechanics, 42, 439-472 (2010)
[17] Nazari, M. and Ramzani, S. Cooling of an electronic board situated in various configurations inside an enclosure: lattice Boltzmann method. Meccanica (An International Journal of Theoretical and Applied Mechanics), 49(3), 645-658 (2013) DOI 10.1007/s11012-013-9817-5
[18] Nazari, M., Mohebbi, R., and Kayhani, M. Heat transfer enhancement in a channel partially filled with a porous block: lattice Boltzmann method. International Journal of Modern Physics C, 24(9), 1350060 (2013)
[19] Nazari, M., Kayhani, M. H., and Bagheri, A. A. H. Comparison of heat transfer in a cavity between vertical and horizontal porous layers using LBM. Modares Mechanical Engineering, 13(8), 93-107 (2013)
[20] Mohamad, A. A., El-Ganaoui, M., and Bennacer, R. Lattice Boltzmann simulation of natural convection in an open ended cavity. International Journal of Thermal Sciences, 48, 1870-1875 (2009)
[21] Jafari, M., Naysari, A., and Bodaghi, K. Lattice Boltzmann simulation of natural convection heat transfer in an inclined open ended cavity. World Academy of Science, Engineering and Technology, 54, 493-498 (2011)
[22] Kefayati, G. R., Hosseinizadeh, S. F., Gorji, M., and Sajjadi, H. Lattice Boltzmann simulation of natural convection in an open enclosure subjugated to water/copper nanofluid. International Journal of Thermal Sciences, 52, 91-101 (2012)
[23] Kefayati, G. R. Effect of a magnetic field on natural convection in an open cavity subjugated to water/alumina nanofluid using lattice Boltzmann method. International Communications in Heat and Mass Transfer, 40, 67-77 (2013)
[24] Zhang, T., Shi, B., and Chai, Z. Lattice Boltzmann simulation of lid-driven flow in trapezoidal cavities. Computer and Fluids, 39(19), 1977-1989 (2010)
[25] Nazari, M., Kayhani, M. H., and Shokri, H. LBM for modeling cavities with curved and moving boundaries. Modares Mechanical Engineering, 13(5), 117-129 (2013)
[26] Yan, Y. Y. and Zu, Y. Q. Numerical simulation of heat transfer and fluid flow past a rotating isothermal cylinder—a LBM approach. International Journal of Heat and Mass Transfer, 51, 2519-2536 (2008)
[27] Zhang, T., Shi, B., Gue, Z., Chai, Z., and Lu, J. General bounce-back scheme for concentration boundary condition in the lattice-Boltzmann method. Physical Review E, 85, 016701 (2012)
[28] Nazari, M. and Shokri, H. Natural convection in semi-ellipse cavities with variable aspect ratios using lattice Boltzmann method. Modares Mechanical Engineering Journal, 13(10), 1-13 (2013)
[29] Zhou, Q., liu, B. F., Li, C. M., Chai, Z., and Zhong, B. C. Aspect ratio dependence of heat trans-port by turbulent Rayleigh-Benard convection in rectangular cells. Journal of Fluid Mechanics, 710, 260-276 (2012)
[30] Zhou, Q., Lu, H., Liu, B. F., and Zhong, B. C. Measurements of heat transport by turbulent Rayleigh-Benard convection in rectangular cells of widely varying aspect ratios. Science China: Physics, Mechanics and Astronomy, 56(5), 989-994 (2013)
[31] Qian, Y. H., d'Humieres, D., and Lallemand, P. Lattice BGK models for Navier-Stokes equation. Europhysics Letters, 17, 479-484 (1992)
[32] Barania, H., Soleimani, S., and Ganji, D. D. Lattice Boltzmann simulation of natural convection around a horizontal elliptic cylinder a square enclosure. International Communications in Heat and Mass Transfer, 38, 1436-1442 (2011)
[33] Shan, X. Simulation of Rayleigh-Bernard convection using lattice Boltzmann method. Physical Review E, 55, 2780-2788 (1997)
[34] Gue, Z., Shi, B., and Zheng, C. A coupled lattice BGK model for the Boussinesq equations. International Journal for Numerical Method in Flows, 39, 325-342 (2002)
[35] Mei, R., Yu, D., Shyy, W., and Luo, L. S. Force evaluation in the lattice Boltzmann method involving curved geometry. Physical Review E, 65, 041203 (2002)
Outlines

/

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals