Applied Mathematics and Mechanics >
Mechanical and thermal postbuckling of FGM thick circular cylindrical shells reinforced by FGM stiffener system using higher-order shear deformation theory
Received date: 2016-05-20
Revised date: 2016-07-23
Online published: 2017-01-01
Supported by
Project supported by the Vietnam National Foundation for Science and Technology Development (No. 107.02-2015.11)
The postbuckling of the eccentrically stiffened circular cylindrical shells made of functionally graded materials (FGMs), subjected to the axial compressive load and external uniform pressure and filled inside by the elastic foundations in the thermal environments, is investigated with an analytical method. The shells are reinforced by FGM stringers and rings. The thermal elements of the shells and stiffeners in the fundamental equations are considered. The equilibrium and nonlinear stability equations in terms of the displacement components for the stiffened shells are derived with the third-order shear deformation theory and Leckhniskii smeared stiffener technique. The closed-form expressions for determining the buckling load and postbuckling load-deflection curves are obtained with the Galerkin method. The effects of the stiffeners, the foundations, the material and dimensional parameters, and the pre-existent axial compressive and thermal load are considered.
D. V. DUNG, H. T. THIEM . Mechanical and thermal postbuckling of FGM thick circular cylindrical shells reinforced by FGM stiffener system using higher-order shear deformation theory[J]. Applied Mathematics and Mechanics, 2017 , 38(1) : 73 -98 . DOI: 10.1007/s10483-017-2159-6
[1] Reddy, J. N. Mechanics of Laminated Composite Plates and Shells:Theory and Analysis, CRC Press, Boca Raton (2004)
[2] Sheng, G. G. and Wang, X. Thermal vibration, buckling and dynamic stability of functionally graded cylindrical shells embedded in an elastic medium. Journal of Reinforced Plastic and Composites, 27, 117-134(2008)
[3] Shen, H. S., Yang, J., and Kitipornchai, S. Postbuckling of internal pressure loaded FGM cylindrical shells surrounded by an elastic medium. European Journal of Mechanic-A/Solids, 29, 448-460(2010)
[4] Sofiyev, A. N. and Avcar, M. The stability of cylindrical shells containing an FGM layer subjected to axial load on the Pasternak foundation. Engineering, 2, 228-236(2010)
[5] Sofiyev, A. N. Buckling analysis of FGM circular shells under combined loads and resting on the Pasternak type elastic foundation. Mechanics Research Communications, 37, 539-544(2010)
[6] Sofiyev, A. H. and Kuruoglu, N. Torsional vibration and buckling of the cylindrical shell with functionally graded coatings surrounded by an elastic medium. Composites Part B:Engineering, 45, 1133-1142(2013)
[7] Bagherizadeh, E., Kiani, Y., and Eslami, M. R. Mechanical buckling of functionally graded material cylindrical shells surrounded by Pasternak elastic foundation. Composite Structures, 93, 3063-3071(2011)
[8] Shen, H. S. Postbuckling analysis of pressure-loaded functionally graded cylindrical shells in thermal environments. Engineering Structures, 25, 487-497(2003)
[9] Huang, H. and Han, Q. Nonlinear dynamic buckling of functionally graded cylindrical shells subjected to time dependent axial load. Composites Structures, 92, 593-598(2010)
[10] Bahadori, R. and Najafizadeh, M. M. Free vibration analysis of two-dimensional functionally graded axisymmetric cylindrical shell on Winkler-Pasternak elastic foundation by first-order shear deformation theory and using Navier-differential quadrature solution methods. Applied Mathematical Modelling, 39, 4877-4894(2015)
[11] Li, Z. M. and Qiao, P. Buckling and postbuckling of anisotropic laminated cylindrical shells under combined external pressure and axial compression in thermal environments. Composite Structures, 119, 709-726(2015)
[12] Shen, H. S. and Wang, H. Nonlinear bending and postbuckling of FGM cylindrical panels subjected to combined loadings and resting on elastic foundations in thermal environments. Composites Part B:Engineering, 78, 202-213(2015)
[13] Sofiyev, A. H. Influences of shear stresses on the dynamic instability of exponentially graded sandwich cylindrical shells. Composites Part B:Engineering, 77, 349-362(2015)
[14] Sofiyev, A. H. Buckling of heterogeneous orthotropic composite conical shells under external pressures within the shear deformation theory. Composites Part B:Engineering, 84, 175-187(2016)
[15] Sofiyev, A. H. Thermoelastic stability of freely supported functionally graded conical shells within the shear deformation theory. Composite Structures, 152, 74-84(2016)
[16] Baruch, M. and Singer, J. Effect of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydro-static pressure. Journal of Mechanical Engineering Science, 5, 23-27(1963)
[17] Ji, Z. Y. and Yeh, K. Y. General solution for nonlinear buckling of non-homogeneous axial symmetric ring-and stringer-stiffened cylindrical shells. Computer and Structures, 34, 585-591(1990)
[18] Reddy, J. N. and Starnes, J. H. General buckling of stiffened circular cylindrical shells according to a Layerwise theory. Computer and Structures, 49, 605-616(1993)
[19] Shen, H. S., Zhou, P., and Chen, T. Y. Postbuckling analysis of stiffened cylindrical shells under combined external pressure and axial compression. Thin-Walled Structures, 15, 43-63(1993)
[20] Tian, J., Wang, C. M., and Swaddiwudhipong, S. Elastic buckling analysis of ring-stiffened cylindrical shells under general pressure loading via the Ritz method. Thin Walled Structures, 35, 1-24(1999)
[21] Sadeghifar, M., Bagheri, M., and Jafari, A. A. Buckling analysis of stringer-stiffened laminated cylindrical shells with non-uniform eccentricity. Archive of Applied Mechanics, 81, 875-886(2011)
[22] Stamatelos, D. G., Labeas, G. N, and Tserpes, K. I. Analytical calculation of local buckling and postbuckling behavior of isotropic and orthotropic stiffened panels. Thin-Walled Structures, 49, 422-430(2011)
[23] Bich, D. H., Dung, D. V., and Nam, V. H. Nonlinear dynamic analysis of eccentrically stiffened imperfect functionally graded doubly curved thin shallow shells. Composite Structures, 96, 384-395(2013)
[24] Bich, D. H., Dung, D. V., Nam, V. H., and Phuong, N. T. Nonlinear static and dynamical buckling analysis of imperfect eccentrically stiffened functionally graded circular cylindrical thin shells under axial compression. International Journal of Mechanical Sciences, 74, 190-200(2013)
[25] Dung, D. V. and Nam, V. H. Nonlinear dynamic analysis of eccentrically stiffened functionally graded circular cylindrical thin shells under external pressure and surrounded by an elastic medium. European Journal of Mechanics A-Solids, 46, 42-53(2014)
[26] Duc, N. D. and Quan, T. Q. Nonlinear dynamic analysis of imperfect FGM double curved thin shallow shells with temperature-dependent properties on elastic foundation. Journal of Vibration and Control, 21, 1340-1362(2015)
[27] Najafizadeh, M. M., Hasani, A., and Khazaeinejad, P. Mechanical stability of functionally graded stiffened cylindrical shells. Applied Mathematical Modelling, 33, 1151-1157(2009)
[28] Dung, D. V. and Hoa, L. K. Nonlinear torsional buckling and postbuckling of eccentrically stiffened FGM cylindrical shells in thermal environment. Composites Part B:Engineering, 69, 378-388(2015)
[29] Dung, D. V. and Hoa, L. K. Semi-analytical approach for analyzing the nonlinear dynamic torsional buckling of stiffened functionally graded material circular cylindrical shells surrounded by an elastic medium. Applied Mathematical Modelling, 39, 6951-6967(2015)
[30] Brush, D. D. and Almroth, B. O. Buckling of Bars, Plates and Shells, McGraw-Hill, New York (1975)
/
| 〈 |
|
〉 |
Email Alert
RSS