A magnetohydrodynamic (MHD) power generator system involves several subjects such as magnetohydrodynamics, plasma physics, material science, and structure mechanics. Therefore, the performance of the MHD power generator is affected by many factors, among which the load coefficient k is of great importance. This paper reveals the effect of some system parameters on the performance by three-dimensional (3D) numerical simulation for a Faraday type MHD power generator using He/Xe as working plasma. The results show that average electrical conductivity increases first and then decreases with the addition of magnetic field intensity. Electrical conductivity reaches the maximum value of 11.05 S/m, while the applied magnetic field strength is B=1.75 T. When B > 3 T, the ionization rate along the midline well keeps stable, which indicates that the ionization rate and three-body recombination rate (three kinds of particles combining to two kinds of particles) are approximately equal, and the relatively stable plasma structure of the mainstream is preserved. Efficiency of power generation of the Faraday type channel increases with an increment of the load factor. However, enthalpy extraction first increases to a certain value, and then decreases with the load factor. The enthalpy extraction rate reaches the maximum when the load coefficient k equals 0.625, which is the best performance of the power generator channel with the maximum electricity production.
[1] Tanaka, M., Murakami, T., and Okuno, Y. Plasma characteristics and performance of magnetohydrodynamic generator with high-temperature inert gas plasma. IEEE Transactions on Plasma Science, 42, 4020-4025(2014)
[2] Tanaka, M., Yu, A., Liang, Z., and Okuno, Y. Experiments on high-temperature Xenon plasma magnetohydrodynamic power generation. IEEE Transactions on Plasma Science, 44, 1-6(2016)
[3] Takeshita, S., Buttapeng, C., and Harada, N. Characteristics of plasma produced by MHD technology and its application to propulsion systems. Vacuum, 84, 685-688(2009)
[4] Anwari, M., Qazi, H., Sukarsan, H., and Harada, N. Numerical analysis of MHD accelerator with non-equilibrium air plasma. Plasma Science and Technology, 14, 1110-1115(2012)
[5] Tanaka, M., Murakami, T., and Okuno, Y. Power generation experiments with a high temperature inert gas plasma faraday type MHD generator. IEEE Transactions on Power and Energy, 134, 58-65(2013)
[6] Tanaka, M. and Okuno, Y. High-temperature inert gas plasma Faraday-type magnetohydrodynamic generator with various working gases. Journal of Propulsion and Power, 32, 1-6(2016)
[7] Tanaka, M., Murakami, T., and Okuno, Y. Plasma fluid flow behavior and power generation characteristics in a high-temperature inert gas plasma Faraday MHD generator. IEEE Transactions on Power and Energy, 194, 46-53(2016)
[8] Tanaka, M., Hitotsubashi, Y., and Okuno, Y. Fundamental studies of radio-frequency preionization for frozen inert gas plasma magnetohydrodynamic electrical power generation. The 14th International Energy Conversion Engineering Conference, American Institute of Aeronautics and Astronautics, Reston (2016)
[9] Hara, T., Veefkind, A., and Rietjens, L. H. T. Numerical simulation of the inhomogeneous discharge structure in noble gas MHD generators. AIAA Journal, 20, 1473-1480(2012)
[10] Litchford, R. J. and Harada, N. Multi-MW closed cycle MHD nuclear space power vianonequilibrium He/Xe working plasma. Proceedings of Nuclear and Emerging Technologies for Space, NASA Technical Reports Server, Washington, D. C. (2011)
[11] Nagai, S., Okuno, Y., and Kobayashi, H. R-z two-dimensional numerical simulation of frozen inert gas plasma MHD generator. The 34th AIAA Plasmadynamics and Lasers Conference, American Institute of Aeronautics and Astronautics, Reston (2013)
[12] Harada, N., Sakamoto, N., and Endo, H. Closed cycle MHD system using He/Xe working gas. The 28th Plasmadynamics and Lasers Conference, American Institute of Aeronautics and Astronautics, Reston (1997)
[13] Harada, N., Le, C. K., and Tashiro, T. Closed cycle MHD generator using He/Xe working plasma. The 33rd Plasma Dynamics and Lasers Conference, American Institute of Aeronautics and Astronautics, Reston (2002)
[14] Harada, N. High efficiency and low specific mass mixed inert gas non-equilibrium MHD single system for space power. Power, 2005, 238-246(2005)
[15] Harada, N. Recent progress in the study of closed cycle MHD system. Stroke:A Journal of Cerebral Circulation, 23, 519-526(2013)
[16] Harada, N. and Tashiro, T. Influence of recombination coefficient on discharge structure and plasma stability in closed cycle MHD generator with He/Xe working gas. The 34th AIAA Plasmadynamics and Lasers Conference, American Institute of Aeronautics and Astronautics, Reston (2003)
[17] Kobayashi, H. and Okuno, Y. Feasibility study on frozen inert gas plasma MHD generator. IEEE Transactions on Plasma Science, 28, 1296-1302(2000)
[18] Veefkind, A., Karavasilev, P., and Wang, D. Performance experiments with a shock-tunnel-driven argon-cesium MHD disk generator. Journal of Propulsion and Power, 4, 363-369(2015)
[19] Veefkind, A. Experiments on plasma-physical aspects of closed cycle MHD power generation. IEEE Transactions on Plasma Science, 32, 2197-2209(2005)
[20] Litchford, R. J., Bitteker, L., and Jones, J. Prospects for nuclear electric propulsion using closedcycle magnetohydrodynamicenergy conversion. The 39th Aerospace Sciences Meeting and Exhibit, American Institute of Aeronautics and Astronautics, Reston (2001)
[21] Murakami, T. and Okuno, Y. Simulation and demonstration of magnetohydrodynamic energy conversion in a high-temperature inert gas. Physics of Plasmas, 16, 425-429(2009)
Email Alert
RSS