[1] ZHANG, W. and DING, Q. Elastic ring deformation and pedestal contact status analysis of elastic ring squeeze film damper. Journal of Sound and Vibration, 346, 314–327(2015)
[2] HAN, Z. F., DING, Q., and ZHANG, W. Dynamical analysis of an elastic ring squeeze film damper-rotor system. Mechanism and Machine Theory, 131, 406–419(2019)
[3] HAN, Z. F., MA, Z. S., ZHANG, W., HAN, B. B., and DING, Q. Dynamic analysis of an elastic ring squeeze film damper supported rotor using a semi-analytic method. Engineering Applications of Computational Fluid Mechanics, 14, 1263–1278(2020)
[4] ZHANG, W., HAN, B. B., LI, X., SUN, J. Q., and DING, Q. Multiple-objective design optimization of squirrel cage for squeeze film damper by using cell mapping method and experimental validation. Mechanism and Machine Theory, 132, 66–79(2019)
[5] DILIGENSKIY, D. S. and NOVIKOV, D. K. Studying of manufacturing tolerance influence on the performance of GTE rotor elastic rings. Procedia Engineering, 176, 483–497(2017)
[6] LUO, Z., LI, L., YANG, Y., HOU, X. J., LIU, J. X., and DING, Z. Experimental and numerical investigations on novel models for mechanical behaviors of the elastic ring in aero-engine. Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, 235, 6257–6267(2021)
[7] SUN, K., LUO, Z., LI, L., LIU, J. X., and WU, F. Y. Dynamic analysis of the variable stiffness support rotor system with elastic rings. Nonlinear Dynamics, 110, 201–217(2022)
[8] ZENG, J., MA, H., YU, K., XU, Z. T., and WEN, B. C. Coupled flapwise-chordwise-axialtorsional dynamic responses of rotating pre-twisted and inclined cantilever beams subject to the base excitation. Applied Mathematics and Mechanics (English Edition), 40(8), 1053–1082(2019) https://doi.org/10.1007/s10483-019-2506-6
[9] GUO, X. M., XIAO, C. L., MA, H., LI, H., ZHANG, X. F., and WEN, B. C. Improved frequency modeling and solution for parallel liquid-filled pipes considering both fluid-structure interaction and structural coupling. Applied Mathematics and Mechanics (English Edition), 43(8), 1269–1288(2022) https://doi.org/10.1007/s10483-022-2883-9
[10] EL-BORGI, S., ALRUMAIHI, S., RAJENDRAN, P., YAZBECK, R., FERNANDES, R., BOYD, J. G., and LAGOUDAS, D. C. Model updating of a scaled piping system and vibration attenuation via locally resonant bandgap formation. International Journal of Mechanical Sciences, 194, 106211(2021)
[11] YUAN, J. R. and DING, H. Dynamic model of curved pipe conveying fluid based on the absolute nodal coordinate formulation. International Journal of Mechanical Sciences, 232, 107625(2022)
[12] DENG, T. C., DING, H., and CHEN, L. Q. Critical velocity and supercritical natural frequencies of fluid-conveying pipes with retaining clips. International Journal of Mechanical Sciences, 222, 107254(2022)
[13] WEI, S., YAN, X., FAN, X., MAO, X. Y., DING, H., and CHEN, L. Q. Vibration of fluid-conveying pipe with nonlinear supports at both ends. Applied Mathematics and Mechanics (English Edition), 43(6), 845–862(2022) https://doi.org/10.1007/s10483-022-2857-6
[14] MAO, X. Y., YIN, M. M., DING, H., GENG, X. F., SHEN, Y. J., and CHEN, L. Q. Modeling, analysis, and simulation of X-shape quasi-zero-stiffness-roller vibration isolators. Applied Mathematics and Mechanics (English Edition), 43(7), 1027–1044(2022) https://doi.org/10.1007/s10483-022-2871-6
[15] WANG, N. F. and JIANG, D. X. Vibration response characteristics of a dual-rotor with unbalancemisalignment coupling faults: theoretical analysis and experimental study. Mechanism and Machine Theory, 125, 207–219(2018)
[16] OOI, L. E. and RIPIN, Z. M. Dynamic stiffness and loss factor measurement of engine rubber mount by impact test. Materials and Design, 32, 1880–1887(2011)
[17] LI, P. F., XU, S. Y., XU, C., DU, F., and CAO, S. C. Development of a miniature dynamic stiffness measurement prototype toward structural health monitoring of space inflatable structures. Measurement, 194, 111051(2022)
[18] WANG, Y. F., MA, Y. H., and HONG, J. Study on dynamic stiffness of supporting structure and its influence on vibration of rotors. Chinese Journal of Aeronautics, 35, 252–263(2022)
[19] CHEN, G. Vibration modelling and verifications for whole aero-engine. Journal of Sound and Vibration, 349, 163–176(2015)
[20] BRIEND, Y., DAKEL, M., CHATELET, E., ANDRIANOELY, M., DUFOUR, R., and BAUDIN, S. Effect of multi-frequency parametric excitations on the dynamics of on-board rotor-bearing systems. Mechanism and Machine Theory, 145, 103660(2020)
[21] HEYDARI, H. and KHORRAM, A. Effects of location and aspect ratio of a flexible disk on natural frequencies and critical speeds of a rotating shaft-disk system. International Journal of Mechanical Sciences, 152, 596–612(2019)
[22] LI, L., LUO, Z., HE, F. X., DING, Z., and SUN, K. A partial similitude method for vibration responses of rotor systems: numerical and experimental verification. International Journal of Mechanical Sciences, 208, 106696(2021)
[23] HAN, Z., LIU, J., and CHEN, J. Research on natural vibration responses based on asymmetrical dual-rotor model. Mechanism and Machine Theory, 167, 104563(2022)
[24] HAN, B. B. and DING, Q. Forced responses analysis of a rotor system with squeeze film damper during flight maneuvers using finite element method. Mechanism and Machine Theory, 122, 233– 251(2018)
[25] CHEN, X., REN, G. M., and GAN, X. H. Dynamic behavior of a flexible rotor system with squeeze film damper considering oil-film inertia under base motions. Nonlinear Dynamics, 106, 3117–3145(2021)
[26] GAO, P., HOU, L., YANG, R., and CHEN, Y. S. Local defect modelling and nonlinear dynamic analysis for the inter-shaft bearing in a dual-rotor system. Applied Mathematical Modelling, 68, 29–47(2019)
[27] GAO, T. and CAO, S. Q. Paroxysmal impulse vibration phenomena and mechanism of a dualrotor system with an outer raceway defect of the inter-shaft bearing. Mechanical Systems and Signal Processing, 157, 107730(2021)
[28] QIN, Z. Y., HAN, Q. K., and CHU, F. L. Analytical model of bolted disk-drum joints and its application to dynamic analysis of jointed rotor. Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, 228, 646–663(2014)
[29] QIN, Z. Y., HAN, Q. K., and CHU, F. L. Bolt loosening at rotating joint interface and its influence on rotor dynamics. Engineering Failure Analysis, 59, 456–466(2016)
[30] LIU, S. G., MA, Y. H., ZHANG, D. Y., and HONG, J. Studies on dynamic characteristics of the joint in the aero-engine rotor system. Mechanical Systems and Signal Processing, 29, 120–136(2012)
[31] HONG, J., CHEN, X. Q., WANG, Y. F., and MA, Y. H. Optimization of dynamics of noncontinuous rotor based on model of rotor stiffness. Mechanical Systems and Signal Processing, 131, 166–182(2019)
[32] YU, P. C., LI, L. X., CHEN, G., and YANG, M. H. Dynamic modelling and vibration characteristics analysis for the bolted joint with spigot in the rotor system. Applied Mathematical Modelling, 94, 306–331(2021)
[33] YU, P. C., WANG, C., LIU, Y. L., and CHEN, G. Analytical modeling of the lateral stiffness of a spline coupling considering teeth engagement and influence on rotor dynamics. European Journal of Mechanics-A/Solids, 92, 104468(2022)
[34] LI, Y. Q., LUO, Z., LIU, J. X., MA, H., and YANG, D. S. Dynamic modeling and stability analysis of a rotor-bearing system with bolted-disk joint. Mechanical Systems and Signal Processing, 158, 107778(2021)
[35] LI, Y. Q., LUO, Z., WANG, J. W., MA, H., and YANG, D. S. Numerical and experimental analysis of the effect of eccentric phase difference in a rotor-bearing system with bolted-disk joint. Nonlinear Dynamics, 105, 2105–2132(2021)
[36] DU, D. X., SUN, W., MA, H. W., YAN, X. F., and LIU, X. F. Vibration characteristics analysis for rotating bolted joined cylindrical shells considering the discontinuous variable-stiffness connection. Thin-Walled Structures, 177, 109422(2022)
[37] YANG, Y., OUYANG, H. J., ZENG, J., MA, H., YANG, Y. R., and CAO, D. Q. Investigation on dynamic characteristics of a rod fastening rotor-bearing coupling system with fixedpoint rubbing. Applied Mathematics and Mechanics (English Edition), 43(7), 1063–1080(2022) https://doi.org/10.1007/s10483-022-2819-7
[38] PRABITH, K. and KRISHNA, I. R. P. Response and stability analysis of a two-spool aero-engine rotor system undergoing multi-disk rub-impact. International Journal of Mechanical Sciences, 213, 106861(2022)
[39] WANG, N. F., LIU, C., JIANG, D. X., and BEHDINAN, K. Casing vibration response prediction of dual-rotor-blade-casing system with blade-casing rubbing. Mechanical Systems and Signal Processing, 118, 61–77(2019)
[40] YU, P. C., WANG, C., HOU, L., and CHEN, G. Dynamic characteristics of an aeroengine dualrotor system with inter-shaft rub-impact. Mechanical Systems and Signal Processing, 166, 108475(2022)
[41] HOU, L., CHEN, H. Z., CHEN, Y. S., LU, K., and LIU, Z. S. Bifurcation and stability analysis of a nonlinear rotor system subjected to constant excitation and rub-impact. Mechanical Systems and Signal Processing, 125, 65–78(2019)
[42] ZENG, J., MA, H., YU, K., GUO, X. M., and WEN, B. C. Rubbing response comparisons between single blade and flexible ring using different rubbing force models. International Journal of Mechanical Sciences, 164, 105164(2019)
[43] CHIPATO, E. T., SHAW, A. D., and FRISWELL, M. I. Nonlinear rotordynamics of a MDOF rotor-stator contact system subjected to frictional and gravitational effects. Mechanical Systems and Signal Processing, 159, 107776(2021)
[44] AGRAPART, Q., NYSSEN, F., LAVAZEC, D., DUFRENOY, P., and BATAILLY, A. Multiphysics numerical simulation of an experimentally predicted rubbing event in aircraft engines. Journal of Sound and Vibration, 460, 114869(2019)
[45] LIU, J. Z., FEI, Q. G., WU, S. Q., TANG, Z. H., and ZHANG, D. H. Nonlinear vibration response of a complex aeroengine under the rubbing fault. Nonlinear Dynamics, 106, 1869–1890(2021)
[46] JIN, Y. L., LIU, Z. W., YANG, Y., LI, F. S., and CHEN, Y. S. Nonlinear vibrations of a dualrotor-bearing-coupling misalignment system with blade-casing rubbing. Journal of Sound and Vibration, 497, 115948(2021)
[47] YANG, Y., OUYANG, H. J., YANG, Y. R., CAO, D. Q., and WANG, K. Vibration analysis of a dual-rotor-bearing-double casing system with pedestal looseness and multi-stage turbine bladecasing rub. Mechanical Systems and Signal Processing, 143, 106845(2020)
[48] WANG, M. L., HAN, Q. K., WEN, B. G., ZHANG, H., and GUAN, T. M. Modal characteristics and unbalance responses of fan rotor system with flexible support structures in aero-engine. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231, 1686–1705(2017)
[49] LI, L., LUO, Z., HE, F. X., SUN, K., and YAN, X. L. An improved partial similitude method for dynamic characteristic of rotor systems based on Levenberg-Marquardt method. Mechanical Systems and Signal Processing, 165, 108405(2022)
[50] LI, L., LUO, Z., HE, F. X., SUN, K., and YAN, X. L. Experimental and numerical investigations on an unbalance identification method for full-size rotor system based on scaled model. Journal of Sound and Vibration, 527, 116868(2022)
Email Alert
RSS