Articles

Inter-well internal resonance analysis of rectangular asymmetric cross-ply bistable composite laminated cantilever shell under transverse foundation excitation

Expand
  • 1 State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240, China
    2 Department of Mechanics, Guangxi University, Nanning 530004, China
    3 Beijing Key Laboratory of Nonlinear Vibrations and Strength of Mechanical Structures, College of Mechanical Engineering, Beijing University of Technology, Beijing 100124, China
Lele REN, E-mail: leleren0318@163.com

Received date: 2024-01-18

  Online published: 2024-07-31

Supported by

the National Natural Science Foundation of China(11832002);the National Natural Science Foundation of China(12072201);Project supported by the National Natural Science Foundation of China (Nos. 11832002 and 12072201)

Copyright

Editorial Department of Applied Mathematics and Mechanics (English Edition), 2024,

Abstract

The chaotic dynamic snap-through and complex nonlinear vibrations are investigated in a rectangular asymmetric cross-ply bistable composite laminated cantilever shell, in cases of 1 : 2 inter-well internal resonance and primary resonance. The transverse foundation excitation is applied to the fixed end of the structure, and the other end is in a free state. The first-order approximate multiple scales method is employed to perform the perturbation analysis on the dimensionless two-degree-of-freedom ordinary differential motion control equation. The four-dimensional averaged equations are derived in both polar and rectangular coordinate forms. Deriving from the obtained frequency-amplitude and force-amplitude response curves, a detailed analysis is conducted to examine the impacts of excitation amplitude, damping coefficient, and tuning parameter on the nonlinear internal resonance characteristics of the system. The nonlinear softening characteristic is exhibited in the upper stable-state, while the lower stable-state demonstrates the softening and linearity characteristics. Numerical simulation is carried out using the fourth-order Runge-Kutta method, and a series of nonlinear response curves are plotted. Increasing the excitation amplitude further elucidates the global bifurcation and chaotic dynamic snap-through characteristics of the bistable cantilever shell.

Cite this article

Lele REN, Wei ZHANG, Yufei ZHANG . Inter-well internal resonance analysis of rectangular asymmetric cross-ply bistable composite laminated cantilever shell under transverse foundation excitation[J]. Applied Mathematics and Mechanics, 2024 , 45(8) : 1353 -1370 . DOI: 10.1007/s10483-024-3136-7

References

1 REN, L. L., ZHANG, W., DONG, T., and ZHANG, Y. F. Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell: an experimental and numerical study. Applied Mathematics and Mechanics (English Edition), 45 (5), 779- 794 (2024)
2 DING, S. Y., SUN, M., LI, Y., MA, W. L., and ZHANG, Z. Novel deployable panel structure integrated with thick origami and morphing bistable composite structures. Materials, 15 (5), 1942 (2022)
3 NAKHLA, S., and ELRUBY, A. Y. Applied finite element procedure for morphing wing design. Applied Composite Materials, 28 (4), 1193- 1220 (2021)
4 DONG, T., CHEN, X. H., and ZHANG, J. Study on dynamic snap-through and nonlinear vibrations of an energy harvester based on an asymmetric bistable composite laminated shell. Symmetry-Basel, 13 (12), 2405 (2021)
5 LI, H. T., DONG, B. J., CAO, F., QIN, W. Y., and TIAN, R. L. Homoclinic bifurcation for a bi-stable piezoelectric energy harvester subjected to galloping and base excitations. Applied Mathematical Modelling, 104, 228- 242 (2022)
6 LU, Z. Q., SHAO, D., FANG, Z. W., DING, H., and CHEN, L. Q. Integrated vibration isolation and energy harvesting via a bistable piezo-composite plate. Journal of Vibration and Control, 26 (9-10), 779- 789 (2020)
7 LU, Z. Q., YANG, T. J., BRENNAN, M. J., LIU, Z. G., and CHEN, L. Q. Experimental investigation of a two-stage nonlinear vibration isolation system with high-static-low-dynamic stiffness. Journal of Applied Mechanics-Transactions of the ASME, 84 (2), 021001 (2017)
8 HYER, M. W. Some observations on the cured shape of thin unsymmetric laminates. Journal of Composite Materials, 15 (2), 175- 194 (1981)
9 DANO, M. L., and HYER, M. W. Snap-through of unsymmetric fiber-reinforced composite laminates. International Journal of Solids and Structures, 39 (1), 175- 198 (2002)
10 SABERI, S., GHAYOUR, M., MIRDAMADI, H. R., and GHAMAMI, M. Free vibration analysis and mode management of bistable composite laminates using deep learning. Archive of Applied Mechanics, 91 (6), 2795- 2816 (2021)
11 ANILKUMAR, P. M., RAO, B. N., SCHEFFLER, S., WOLNIAK, M., ROLFES, R., HALDAR, A., and JANSEN, E. L. Refined semi-analytical framework to predict the natural vibration characteristics of bistable laminates. AIAA Journal, 61, 062289 (2023)
12 NICASSIO, F., LIONETTO, F., SCARSELLI, G., and MAFFEZZOLI, A. Time-dependent shape of bistable unsymmetric carbon fibers-epoxy thin laminates. Smart Materials and Structures, 30 (3), 035004 (2021)
13 ZHU, Y. T., and TAO, J. X. Thermally induced bistable functionally graded nanocomposite plate. Mathematical Problems in Engineering, 2022, 1185792 (2022)
14 DESHPANDE, V., MYERS, O., FADEL, G., and LI, S. Y. Transient deformation and curvature evolution during the snap-through of a bistable laminate under asymmetric point load. Composite Science and Technology, 211, 108871 (2021)
15 BILGEN, O., ARRIETA, A. F., FRISWELL, M. I., and HAGEDORN, P. Dynamic control of a bistable wing under aerodynamic loading. Smart Materials and Structures, 22 (2), 025020 (2013)
16 EMAM, S. A., HOBECK, J., and INMAN, D. J. Experimental investigation into the nonlinear dynamics of a bistable laminate. Nonlinear Dynamics, 95 (4), 3019- 3039 (2019)
17 HABIBZADEH, N., TIKANI, R., ZIAEI-RAD, S., and TAKI, M. S. Static and dynamic analysis of a bistable plate under nonlinear magnetic force. Journal of Vibration and Control, 28 (7-8), 745- 757 (2020)
18 HAO, Y. X., BAI, C. P., ZHANG, W., LIU, L. T., and YANG, S. W. Intrawell and interwell oscillations for bi-stable cross-ply laminates actuated by MFC under oscillating impulse voltages. International Journal of Non-Linear Mechanics, 143, 104025 (2022)
19 HAO, Y. X., ZHOU, W. B., ZHANG, W., YANG, S. W., and CAO, Y. T. Dynamic snap-through of bi-stable laminates with simply supported at four corners under impact loads. Mechanics Based Design of Structures and Machines, 52 (3), 1584- 1603 (2024)
20 ANILKUMAR, P. M., SCHEFFLER, S., HALDAR, A., BROD, M., RAO, B. N., JANSEN, E. L., and ROLFES, R. Nonlinear dynamic modeling of bistable variable stiffness composite laminates. Journal of Sound and Vibration, 545, 117417 (2023)
21 REN, L. L., ZHANG, W., and ZHANG, Y. F. Dynamic snap-through and nonlinear vibrations of bistable asymmetric cross-ply composite laminated cantilever shell under external excitation. Mechanical Systems and Signal Processing, 195, 110193 (2023)
22 MUKHERJEE, A., FRISWELL, M. I., ALI, S. F., and AROCKIARAJAN, A. Modeling and design of a class of hybrid bistable symmetric laminates with cantilever boundary configuration. Composite Structures, 239, 112019 (2020)
23 MUKHERJEE, A., ALI, S. F., and AROCKIARAJAN, A. Hybrid bistable composite laminates for structural assemblies: a numerical and experimental study. Composite Structures, 260, 113467 (2021)
24 HIJAZI, S., and EMAM, S. An investigation into the static configurations and snapthrough response of clamped hybrid bistable symmetric laminates. Composite Structures, 312, 116880 (2023)
25 LIU, X. H., LI, M., and DAI, F. H. Wind-induced vibration behavior of bistable hybrid symmetric laminate. Composite Structures, 301, 116126 (2022)
26 CHEN, L. Q., and FAN, Y. M. Internal resonance vibration-based energy harvesting. Nonlinear Dynamics, 111 (13), 11703- 11727 (2023)
27 LIU, J., LU, Y. L., WANG, Z., LI, S., and WU, Y. P. Three frequency up-converting piezoelectric energy harvesters caused by internal resonance mechanism: a narrative review. Micromachines, 13 (2), 210 (2022)
28 ASADI, K., YU, J., and CHO, H. N. Nonlinear couplings and energy transfers in micro- and nano-mechanical resonators: intermodal coupling, internal resonance and synchronization. Philosophical Transactions of the Royal Society A: Mathematical Physical and Engineering Sciences, 376 (2127), 20170141 (2018)
29 HUANG, W. B., CHEN, Z. W., LIN, W. R., WANG, S. J., and XIE, Z. Q. A novel two degree of freedom single magnet bistable energy harvester based on internal resonance. Smart Materials and Structures, 32 (1), 015012 (2023)
30 ZHANG, J. Y., LI, X. F., LI, R. F., DAI, L., WANG, W., and YANG, K. Internal resonance of a two-degree-of-freedom tuned bistable electromagnetic actuator. Chaos Solitons & Fractals, 143, 110612 (2021)
31 MAO, X. Y., DING, H., and CHEN, L. Q. Forced vibration of axially moving beam with internal resonance in the supercritical regime. International Journal of Mechanical Sciences, 131, 81- 94 (2017)
32 ZHANG, T. Y., GUO, C. W., JIANG, Z. D., and WEI, X. Y. Internal resonance between the extensional and flexural modes in micromechanical resonators. Journal of Applied Physics, 126 (16), 164506 (2019)
33 CHEN, J., HU, W. H., and LI, Q. S. Nonlinear dynamics of a foldable multibeam structure with one to two internal resonances. International Journal of Mechanical Sciences, 150, 369- 378 (2019)
34 NIU, Y., WU, M. Q., YAO, M. H., and WU, Q. L. Dynamic instability and internal resonance of rotating pretwisted composite airfoil blades. Chaos Solitons & Fractals, 165 (2), 112835 (2022)
35 TENG, M. W., and WANG, Y. Q. Spin-induced internal resonance in circular cylindrical shells. International Journal of Non-Linear Mechanics, 147, 104234 (2022)
Outlines

/

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals