Competition between electro-magnetic enhancing and shear stress weakening effects on adhesion behaviors of multiferroic composites

Yueting ZHOU, Qinghui LUO, Lihua WANG, Shenghu DING

doi:10.1007/s10483-025-3245-8

2025 , Vol. 46 >Issue 5: 831 - 848

DOI: https://doi.org/10.1007/s10483-025-3245-8

Competition between electro-magnetic enhancing and shear stress weakening effects on adhesion behaviors of multiferroic composites

Expand

^1.School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China
^2.Shanghai Institute of Aircraft Mechanics and Control, Shanghai 200092, China
^3.School of Mathematics and Statistics, Ningxia University, Yinchuan 750021, China

Yueting ZHOU, E-mail: zhouyt@tongji.edu.cn

Received date: 2024-11-13

Revised date: 2025-03-04

Online published: 2025-05-07

Supported by

Project supported by the National Natural Science Foundation of China (Nos. 12272269, 11972257, and 11472193), the Shanghai Pilot Program for Basic Research, and the Shanghai Gaofeng Project for University Academic Program Development

Copyright

Fold

Abstract

The adhesion enhancing effect induced by electro-magnetic loading and the adhesion weakening effect resulting from interfacial shear stress have been observed and widely reported in open literature. However, the adhesion behavior of multiferroic composites in the simultaneous presence of these two effects and the competitive mechanism between them are still unclear. In this paper, the non-slipping adhesive contact problem between a multiferroic half-space and a perfectly conducting rigid cylinder subject to multi-field loading is studied. The stated problem is reduced to a system of coupled singular integral equations, which are analytically solved with the analytical function theory. The closed-form solutions of the generalized stress fields including the contact stress, normal electric displacement, and magnetic induction are obtained. The stable equilibrium state of the adhesion system is determined with the Griffith energy balance criterion. The adhesion behavior subject to mechanical-electro-magnetic loading and a mismatch strain is discussed in detail. Numerical results indicate that exerting electro-magnetic loading can enhance the adhesion effect for both two types of multiferroic composites, namely, $κ$ -class (non-oscillatory singularity) and $ε$ -class, which is different from the case of piezoelectric materials. It is found that the contact size finally decreases in the simultaneous presence of the electro-magnetic enhancing and shear-stress weakening effects. The results derived from this work not only are helpful to understand the contact behavior of multiferroic composites at micro/nano scale, but also have potential application value in achieving switchable adhesion.

Key words： adhesive contact; multiferroic composite; analytical solution; non-slipping; Johnson-Kendall-Roberts (JKR) model

Cite this article

Yueting ZHOU, Qinghui LUO, Lihua WANG, Shenghu DING . Competition between electro-magnetic enhancing and shear stress weakening effects on adhesion behaviors of multiferroic composites[J]. Applied Mathematics and Mechanics, 2025 , 46(5) : 831 -848 . DOI: 10.1007/s10483-025-3245-8

References

[1]	NAN, C. W., BICHURIN, M. I., DONG, S. X., VIEHLAND, D., and SRINIVASAN, G.Multiferroic magnetoelectric composites: historical perspective, status, and future directions. Journal of Applied Physics, 103(3), 031101 (2008)
[2]	KALININ, S. V., KARAPETIAN, E., and KACHANOV, M.Nanoelectromechanics of piezoresponse force microscopy. Physical Review B, 70(18), 184101 (2004)
[3]	KARAPETIAN, E., KACHANOV, M., and KALININ, S. V.Nanoelectromechanics of piezoelectric indentation and applications to scanning probe microscopies of ferroelectric materials. Philosophical Magazine, 85(10), 1017–1051 (2005)
[4]	CHEN, W. Q., PAN, E. N., WANG, H. M., and ZHANG, C. Z.Theory of indentation on multiferroic composite materials. Journal of the Mechanics and Physics of Solids, 58(10), 1524–1551 (2010)
[5]	LI, X. Y., WU, F., JIN, X., and CHEN, W. Q.3D coupled field in a transversely isotropic magneto-electro-elastic half space punched by an elliptic indenter. Journal of the Mechanics and Physics of Solids, 75, 1–44 (2015)
[6]	WU, F., LI, X. Y., CHEN, W. Q., KANG, G. Z., and MüLLER, R.Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region. International Journal of Engineering Science, 123, 236–289 (2018)
[7]	ELLOUMI, R., KALLEL-KAMOUN, I., EL-BORGI, S., and GULER, M. A.On the frictional sliding contact problem between a rigid circular conducting punch and a magneto-electro-elastic half-plane. International Journal of Mechanical Sciences, 87, 1–17 (2014)
[8]	ZHANG, X., WANG, Z. J., SHEN, H. M., and WANG, Q. J.Frictional contact involving a multiferroic thin film subjected to surface magnetoelectroelastic effects. International Journal of Mechanical Sciences, 131-132, 633–648 (2017)
[9]	WU, F., WU, T. H., and LI, X. Y.Indentation theory on a half-space of transversely isotropic multi-ferroic composite medium: sliding friction effect. Smart Materials and Structures, 27(3), 035005 (2018)
[10]	ZHANG, H. B., WANG, W. Z., LIU, Y. Q., and ZHAO, Z. Q.Semi-analytic modelling of transversely isotropic magneto-electro-elastic materials under frictional sliding contact. Applied Mathematical Modelling, 75, 116–140 (2019)
[11]	ZHOU, Y. T. and LEE, K. Y.Contact problem for magneto-electro-elastic half-plane materials indented by a moving punch, part II: numerical results. International Journal of Solids and Structures, 49(26), 3866–3882 (2012)
[12]	ZHANG, X., WANG, Z. J., SHEN, H. M., and WANG, Q. J.Dynamic contact in multiferroic energy conversion. International Journal of Solids and Structures, 143, 84–102 (2018)
[13]	ZHOU, Y. T. and KIM, T. W.Constructing potentials to evaluate magneto-electro-elastic materials in contact with periodically rough surface. European Journal of Mechanics-A/Solids, 53, 89–98 (2015)
[14]	ZHOU, Y. T. and KIM, T. W.Role of rough surface on contact between magneto-electro-elastic materials and orthotropic solid. International Journal of Mechanical Sciences, 99, 187–195 (2015)
[15]	??MEZ, ?.Thermoelastic contact problem of a magneto-electro-elastic layer indented by a rigid insulating punch. Mechanics of Advanced Materials and Structures, 29(28), 7231–7245 (2021)
[16]	MA, J., KE, L. L., WANG, Y. S., and AIZIKOVICH, S. M.Thermal contact of magneto-electro-elastic materials subjected to a conducting flat punch. The Journal of Strain Analysis for Engineering Design, 50(7), 513–527 (2015)
[17]	WU, F. and LI, C.Partial slip contact problem between a transversely isotropic half-space of multi-ferroic composite medium and a spherical indenter. Mechanics of Materials, 161, 104018 (2021)
[18]	WU, F., LI, X. Y., ZHENG, R. F., and KANG, G. Z.Theory of adhesive contact on multi-ferroic composite materials: spherical indenter. International Journal of Engineering Science, 134, 77–116 (2019)
[19]	WU, F. and LI, C.Theory of adhesive contact on multi-ferroic composite materials: conical indenter. International Journal of Solids and Structures, 233, 111217 (2021)
[20]	GRIERSON, D. S., LIU, J. J., CARPICK, R. W., and TURNER, K. T.Adhesion of nanoscale asperities with power-law profiles. Journal of the Mechanics and Physics of Solids, 61(2), 597–610 (2013)
[21]	BORODICH, F. M., GALANOV, B. A., and SUAREZ-ALVAREZ, M. M.The JKR-type adhesive contact problems for power-law shaped axisymmetric punches. Journal of the Mechanics and Physics of Solids, 68, 14–32 (2014)
[22]	WU, J. J.Numerical analysis on the adhesive contact between a rigid power-law shaped axisymmetric asperity and an elastic half-space. Journal of Adhesion Science and Technology, 36(2), 195–219 (2022)
[23]	LUO, Q. H., ZHOU, Y. T., YANG, Y. X., DING, S. H., and WANG, L. H.The adjustable adhesion strength of multiferroic composite materials via electromagnetic loadings and shape effect of punch. Journal of the Mechanics and Physics of Solids, 192, 105794 (2024)
[24]	WU, F., ZHANG, S. B., LI, C., and LI, X. Y.Modulating adhesion strength in multi-ferroic composite materials: insights from adhesive contact with arbitrary profile indenters. International Journal of Solids and Structures, 292, 112721 (2024)
[25]	MERGEL, J. C., SAHLI, R., SCHEIBERT, J., and SAUER, R. A.Continuum contact models for coupled adhesion and friction. The Journal of Adhesion, 95(12), 1101–1133 (2018)
[26]	PENG, B., LI, Q. Y., FENG, X. Q., and GAO, H. J.Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model. Journal of the Mechanics and Physics of Solids, 148, 104275 (2021)
[27]	KRICK, B. A., VAIL, J. R., PERSSON, B. N. J., and SAWYER, W. G.Optical in situ micro tribometer for analysis of real contact area for contact mechanics, adhesion, and sliding experiments. Tribology Letters, 45(1), 185–194 (2012)
[28]	WATERS, J. F. and GUDURU, P. R.Mode-mixity-dependent adhesive contact of a sphere on a plane surface. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 466(2117), 1303–1325 (2010)
[29]	PAPANGELO, A. and CIAVARELLA, M.On mixed-mode fracture mechanics models for contact area reduction under shear load in soft materials. Journal of the Mechanics and Physics of Solids, 124, 159–171 (2019)
[30]	MENGA, N., CARBONE, G., and DINI, D.Do uniform tangential interfacial stresses enhance adhesion?Journal of the Mechanics and Physics of Solids, 112, 145–156 (2018)
[31]	MENGA, N., CARBONE, G., and DINI, D.Corrigendum to “Do uniform tangential interfacial stresses enhance adhesion?” [Journal of the Mechanics and Physics of Solids 112 (2018) 145–156]. Journal of the Mechanics and Physics of Solids, 133, 103744 (2019)
[32]	KIM, K. S., MCMEEKING, R. M., and JOHNSON, K. L.Adhesion, slip, cohesive zones and energy fluxes for elastic spheres in contact. Journal of the Mechanics and Physics of Solids, 46(2), 243–266 (1998)
[33]	MCMEEKING, R. M., CIAVARELLA, M., CRICRì, G., and KIM, K. S.The interaction of frictional slip and adhesion for a stiff sphere on a compliant substrate. Journal of Applied Mechanics, 87(3), 031016 (2020)
[34]	SATO, T., MILNE, Z. B., NOMURA, M., SASAKI, N., CARPICK, R. W., and FUJITA, H.Ultrahigh strength and shear-assisted separation of sliding nanocontacts studied in situ. Nature Communications, 13(1), 2551 (2022)
[35]	CHEN, S. and GAO, H.Non-slipping adhesive contact of an elastic cylinder on stretched substrates. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 462(2065), 211–228 (2006)
[36]	GUO, X. and JIN, F.A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric half-space. International Journal of Solids and Structures, 46(20), 3607–3619 (2009)
[37]	TING, T. C. T.Anisotropic Elasticity: Theory and Applications, Oxford University Press, New York (1996)
[38]	LEI, J. and ZHANG, C. Z.On the generalized Barnett-Lothe tensors for anisotropic magnetoelectroelastic materials. European Journal of Mechanics-A/Solids, 46, 12–21 (2014)
[39]	YAO, H., CHEN, S., GUDURU, P. R., and GAO, H.Orientation-dependent adhesion strength of a rigid cylinder in non-slipping contact with a transversely isotropic half-space. International Journal of Solids and Structures, 46(5), 1167–1175 (2009)
[40]	JIN, F. and GUO, X.Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space. International Journal of Solids and Structures, 47(11-12), 1508–1521 (2010)
[41]	YAO, H. M.A generalized model for adhesive contact between a rigid cylinder and a transversely isotropic substrate. Journal of Applied Mechanics, 80(1), 011027 (2013)

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References