Applied Mathematics and Mechanics >
Multi-field coupling characteristics of two-dimensional piezoelectric quasicrystals with an elliptical inclusion
Received date: 2026-05-09
Revised date: 2026-07-06
Online published: 2026-10-30
Supported by
Project supported by the National Natural Science Foundation of China (Nos. 12272402 and 12102458), the Chinese Universities Scientific Fund (No. 2025TC014), and the China Agricultural University Education Foundation (No. 1101-240001)
Copyright
With the rapidly increasing demand for strongly coupled multifunctional materials in engineering applications such as high-performance sensors, defect problems in piezoelectric quasicrystals (PQCs) have attracted growing attention. This study investigates the mechanical behavior of a two-dimensional (2D) PQC containing an elliptical inclusion subjected to uniform loading at infinity and a concentrated force applied in the matrix. Based on the Stroh formalism, combined with conformal mapping and analytic continuation techniques, the analytical solutions for the in-plane displacements and stresses are derived. Meanwhile, the correctness of the model is verified through a comparison between the degenerated infinite-plane numerical results and classical reference solutions. Numerical examples are further conducted to systematically analyze the influence of the inclusion geometry and the loading position on the multi-field coupling responses. The results show that the elliptical inclusion significantly alters the spatial distributions of the mechanical and electrical fields, producing strong disturbances near the inclusion boundary. In particular, decreasing the ellipse aspect ratio b/a markedly enhances the local coupling and stress concentration, whereas the circular inclusion exhibits the weakest anisotropy, resulting in relatively smooth field distributions and low stress concentration. These findings indicate that properly utilizing geometric defects can serve as an effective means of tuning multi-field coupling behavior, and this strategy should be fully considered in engineering design.
Tangrui LAI , Liangliang ZHANG , Yang LI , Xiang MU , Yang GAO . Multi-field coupling characteristics of two-dimensional piezoelectric quasicrystals with an elliptical inclusion[J]. Applied Mathematics and Mechanics, 2026 , 47(10) : 2145 -2164 . DOI: 10.1007/s10483-026-3437-7
| [1] | SHECHTMAN, D., BLECH, I., GRATIAS, D., and CAHN, J. W. Metallic phase with long-range orientational order and no translational symmetry. Physical Review Letters, 53(20), 1951–1953 (1984) |
| [2] | DUBOIS, J. M. Properties and applications of quasicrystals and complex metallic alloys. Chemical Society Reviews, 41(20), 6760 (2012) |
| [3] | HU, C. Z., WANG, R. H., DING, D. H., and YANG, W. G. Piezoelectric effects in quasicrystals. Physical Review B, 56(5), 2463–2468 (1997) |
| [4] | DUBOIS, J. M., KANG, S. S., and PERROT, A. Towards applications of quasicrystals. Materials Science and Engineering: A, 179, 122–126 (1994) |
| [5] | H?TTESTRAND, M., NILSSON, J. O., STILLER, K., LIU, P., and ANDERSSON, M. Precipitation hardening in a 12%Cr-9%Ni-4%Mo-2%Cu stainless steel. Acta Materialia, 52(4), 1023–1037 (2004) |
| [6] | EISENHAMMER, T., HAUGENEDER, A., and MAHR, A. High-temperature optical properties and stability of selective absorbers based on quasicrystalline AlCuFe. Solar Energy Materials and Solar Cells, 54(1-4), 379–386 (1998) |
| [7] | HAN, Q. G., ZHONG, J. L., ZHANG, Q., LIU, B., and WANG, L. M. Fabrication and properties of Ti-Zr-Ni quasicrystal and bulk composite materials by high pressure sintering. Journal of Non-Crystalline Solids, 428, 62–67 (2015) |
| [8] | LI, L. H. and LIU, G. T. The interaction between the dislocation and elliptic notch in one-dimensional hexagonal quasi-crystals. Modern Physics Letters B, 23(28), 3397–3407 (2009) |
| [9] | ZOU, W. N. and HE, Q. C. Revisiting the problem of a 2D infinite elastic isotropic medium with a rigid inclusion or a cavity. International Journal of Engineering Science, 126, 68–96 (2018) |
| [10] | JOHNSON, W. and GHOSH, S. K. Some physical defects arising in composite material fabrication. Journal of Materials Science, 16(2), 285–301 (1981) |
| [11] | LI, S. C., SUN, Z., XIAO, G., CAI, W. J., ZHOU, L., and ZHANG, Y. Research on selective laser sintering process of ternary composite materials (PP/MCMB/CNT). Materials Today Communications, 36, 106589 (2023) |
| [12] | XU, Q., LU, J., and LI, W. Defects in static elasticity of quasicrystals. Crystals, 7(12), 373 (2017) |
| [13] | KELTON, K. F. Quasicrystals: structure and stability. International Materials Reviews, 38(3), 105–137 (1993) |
| [14] | LAI, T. R., FU, X. Y., MU, X., ZHANG, L. L., and GAO, Y. Green’s function for two-dimensional piezoelectric quasicrystals containing elliptical defects. Acta Mechanica Solida Sinica, 39(1), 65–80 (2026) |
| [15] | SHEN, Y. T., LEE, Y., and ZOU, W. N. Series solution of Eshelby problem of an arbitrary smooth inclusion in an MEE full plane. Applied Mathematical Modelling, 158, 116978 (2026) |
| [16] | ZOU, W. N. and ZHENG, Q. S. The second Eshelby problem and its solvability. Acta Mechanica Sinica, 28(5), 1331–1333 (2012) |
| [17] | ZOU, W. N., HE, Q. C., and ZHENG, Q. S. General solution for Eshelby’s problem of 2D arbitrarily shaped piezoelectric inclusions. International Journal of Solids and Structures, 48(19), 2681–2694 (2011) |
| [18] | SHI, W. C. Collinear periodic cracks and/or rigid line inclusions of antiplane sliding mode in one-dimensional hexagonal quasicrystal. Applied Mathematics and Computation, 215(3), 1062–1067 (2009) |
| [19] | ZHAI, T., MA, Y. Y., DING, S. H., and ZHAO, X. F. Circular inclusion problem of two-dimensional decagonal quasicrystals with interfacial rigid lines under concentrated force. Journal of Applied Mathematics and Mechanics, 101(12), e202100081 (2021) |
| [20] | LOU, F., CAO, T., QIN, T. Y., and XU, C. H. Plane analysis for an inclusion in 1D hexagonal quasicrystal using the hypersingular integral equation method. Acta Mechanica Solida Sinica, 32(2), 249–260 (2019) |
| [21] | LI, X. P. and LI, L. H. Three-dimensional analysis of elliptical inclusions in two-dimensional decagonal quasicrystal. Physica B: Condensed Matter, 646, 414314 (2022) |
| [22] | PASTERNAK, V., SULYM, H., PASTERNAK, I. M., and HOTSYK, I. Extended Stroh formalism for plane problems of thermoelasticity of quasicrystals with applications to Green’s functions and fracture mechanics. International Journal of Engineering Science, 203, 104124 (2024) |
| [23] | ALTAY, G. and CENGIZ D?KMECI, M. On the fundamental equations of piezoelasticity of quasicrystal media. International Journal of Solids and Structures, 49(23-24), 3255–3262 (2012) |
| [24] | RAO K. R. M., RAO, P. H., and CHAITANYA, B. S. K. Piezoelectricity in quasicrystals: a group-theoretical study. Pramana, 68(3), 481–487 (2007) |
| [25] | AGIASOFITOU, E. and LAZAR, M. On the constitutive modelling of piezoelectric quasicrystals. Crystals, 13(12), 1652 (2023) |
| [26] | MU, X., XU, W. S., ZHU, Z. W., ZHANG, L. L., and GAO, Y. Multi-field coupling solutions of functionally graded two-dimensional piezoelectric quasicrystal wedges and spaces. Applied Mathematical Modelling, 109, 251–264 (2022) |
| [27] | FENG, X., KE, L. L., and GAO, Y. Love wave propagation in one-dimensional piezoelectric quasicrystal multilayered nanoplates with surface effects. Applied Mathematics and Mechanics (English Edition), 45(4), 619–632 (2024) https://doi.org/10.1007/s10483-024-3104-9 |
| [28] | HU, K. Q., MEGUID, S. A., ZHONG, Z., and GAO, C. F. Partially debonded circular inclusion in one-dimensional quasicrystal material with piezoelectric effect. International Journal of Mechanics and Materials in Design, 16(4), 749–766 (2020) |
| [29] | ZHANG, Z. G., DING, S. H., and LI, X. A spheroidal inclusion within a 1D hexagonal piezoelectric quasicrystal. Archive of Applied Mechanics, 90(5), 1039–1058 (2020) |
| [30] | LI, G. F. and LI, L. H. Eshelby tensors for two-dimensional decagonal piezoelectric quasicrystal composites. Crystals, 12(10), 1456 (2022) |
| [31] | HU, K. Q., MEGUID, S. A., WANG, L. B., and JIN, H. Electro-elastic field of a piezoelectric quasicrystal medium containing two cylindrical inclusions. Acta Mechanica, 232(7), 2513–2533 (2021) |
| [32] | GUO, J. H., ZHANG, Z. Y., and XING, Y. M. Antiplane analysis for an elliptical inclusion in 1D hexagonal piezoelectric quasicrystal composites. Philosophical Magazine, 96(4), 349–369 (2016) |
| [33] | HSIEH, M. C. and HWU, C. Anisotropic elastic plates with holes/cracks/inclusions subjected to out-of-plane bending moments. International Journal of Solids and Structures, 39(19), 4905–4925 (2002) |
| [34] | LU, P. and WILLIAMS, F. W. Green functions of piezoelectric material with an elliptic hole or inclusion. International Journal of Solids and Structures, 35(7-8), 651–664 (1998) |
| [35] | NGUYEN, V. T. and HWU, C. Holes, cracks, or inclusions in two-dimensional linear anisotropic viscoelastic solids. Composites Part B: Engineering, 117, 111–123 (2017) |
| [36] | LAI, T. R., FU, X. Y., MU, X., ZHANG, L. L., and GAO, Y. Fundamental solutions for two-dimensional piezoelectric quasicrystals with polygonal holes. Applied Mathematics and Mechanics (English Edition), 47(3), 623–638 (2026) https://doi.org/10.1007/s10483-026-3356-6 |
| [37] | MU, X., FU, X. Y., ZHANG, L. L., ZHU, Z. W., ZHANG, J. M., and GAO, Y. Fundamental solutions of critical wedge angles for one-dimensional piezoelectric quasicrystal wedge. Applied Mathematics and Mechanics (English Edition), 43(5), 709–728 (2022) https://doi.org/10.1007/s10483-022-2847-6 |
| [38] | FENG, X., FAN, X. Y., LI, Y., ZHANG, H., ZHANG, L. L., and GAO, Y. Static response and free vibration analysis for cubic quasicrystal laminates with imperfect interfaces. European Journal of Mechanics A/Solids, 90, 104365 (2021) |
| [39] | LI, Y., YANG, L. Z., ZHANG, L. L., and GAO, Y. Nonlocal free and forced vibration of multilayered two-dimensional quasicrystal nanoplates. Mechanics of Advanced Materials and Structures, 28(12), 1216–1226 (2021) |
| [40] | GAO, Y. and ZHAO, B. S. General solutions of three-dimensional problems for two-dimensional quasicrystals. Applied Mathematical Modelling, 33(8), 3382–3391 (2009) |
| [41] | LI, Y., YANG, L. Z., GAO, Y., and PAN, E. N. Cylindrical bending analysis of a layered two-dimensional piezoelectric quasicrystal nanoplate. Journal of Intelligent Material Systems and Structures, 29(12), 2660–2676 (2018) |
| [42] | YANG, L. Z., LI, Y., GAO, Y., PAN, E. N., and WAKSMANSKI, N. Three-dimensional exact electric-elastic analysis of a multilayered two-dimensional decagonal quasicrystal plate subjected to patch loading. Composite Structures, 171, 198–216 (2017) |
| [43] | PAN, E. Three-dimensional Green’s functions in anisotropic magneto-electro-elastic bimaterials. Zeitschrift für Angewandte Mathematik und Physik, 53(5), 815–838 (2002) |
| [44] | CHUNG, M. Y. and TING, T. C. T. The Green function for a piezoelectric piezomagnetic magnetoelectric anisotropic elastic medium with an elliptic hole or rigid inclusion. Philosophical Magazine Letters, 72(6), 405–410 (1995) |
| [45] | HWU, C. and YEN, W. J. On the anisotropic elastic inclusions in plane elastostatics. Journal of Applied Mechanics, 60(3), 626–632 (1993) |
| [46] | CHUNG, M. Y. and TING, T. C. T. Piezoelectric solid with an elliptic inclusion or hole. International Journal of Solids and Structures, 33(23), 3343–3361 (1996) |
| [47] | XU, W. S., WU, D., and GAO, Y. Fundamental elastic field in an infinite plane of two-dimensional piezoelectric quasicrystal subjected to multi-physics loads. Applied Mathematical Modelling, 52, 186–196 (2017) |
| [48] | MU, X., HU, Z. M., ZHU, Z. W., ZHANG, J. M., LI, Y., ZHANG, L. L., and GAO, Y. Analytical solutions for two-dimensional piezoelectric quasicrystal composite wedges and spaces. Mechanics of Advanced Materials and Structures, 30(21), 4303–4316 (2023) |
/
| 〈 |
|
〉 |