ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES

Applied Mathematics and Mechanics (English Edition) ›› 2003, Vol. 24 ›› Issue (1): 14-21.

ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES

刘玉岚, 王彪, 王殿富

Research Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China

收稿日期:2001-09-27 修回日期:2002-08-25 出版日期:2003-01-18 发布日期:2003-01-18
基金资助:
the National Natural Science Foundation of China(50232030,10172030);the Natural Science Foundation of Heilongjiang Province

ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES

LIU Yu-lan, WANG Biao, WANG Dian-fu

Research Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China

Received:2001-09-27 Revised:2002-08-25 Online:2003-01-18 Published:2003-01-18
Supported by:
the National Natural Science Foundation of China(50232030,10172030);the Natural Science Foundation of Heilongjiang Province

摘要/Abstract

摘要： The energy release rate(ERR) of crack growth as the energy change at the same time t between the two states of the structure is redefined, one is with crack length a under the loading σ(t), the other is the state with crack length a + Δa under the same loading condition. Thus the defined energy release rate corresponds to the released energy when a crack grows from a to a+ Δa in an infinitesimal time. It is found that under a given loading history, the ERR is a function of time, and its maximum value should correspond with the critical state for delamination to propagate. Following William’s work, the explicit expressions of ERR for DCB experimental configurations to measure the interfacial fracture toughness have been obtained through the classical beam assumption.

Abstract: The energy release rate(ERR) of crack growth as the energy change at the same time t between the two states of the structure is redefined, one is with crack length a under the loading σ(t), the other is the state with crack length a + Δa under the same loading condition. Thus the defined energy release rate corresponds to the released energy when a crack grows from a to a+ Δa in an infinitesimal time. It is found that under a given loading history, the ERR is a function of time, and its maximum value should correspond with the critical state for delamination to propagate. Following William’s work, the explicit expressions of ERR for DCB experimental configurations to measure the interfacial fracture toughness have been obtained through the classical beam assumption.

中图分类号:

O346.1

刘玉岚;王彪;王殿富. ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES[J]. Applied Mathematics and Mechanics (English Edition), 2003, 24(1): 14-21.

LIU Yu-lan;WANG Biao;WANG Dian-fu. ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES[J]. Applied Mathematics and Mechanics (English Edition), 2003, 24(1): 14-21.

参考文献

[1] Watson K A, Liechtl K M. Adhesion measurements of printed wiring board assemblies[A]. In:J C Suhling Ed.Applications of Experimental Mechanics to Electronic Packaging[C],ASME Press,1995.
[2] Nguyen L T, Chen A S, Lo R Y. Interfacial integrith in electronic packaging[J]. Application of Fracture Mechancis in Electronic Packaging and Materials,EEP-Vol 11/MD-Vol 64,ASME,1995.34-44.
[3] Christensen R M. A rate-dependent criterion for crack growth[J]. International Journal of Fracture,1979,15(3):3-12.
[4] Christensen R M. Theory of Viscoelasticity, an Introduction[M].Second Edition.New York: Academic Press,Inc,1982.
[5] Schapery R A. A theory of crack initiation and growth in viscoelastic media Ⅰ: Theoretical development[J]. International Journal of Fracture,1975,11(1):141-159.
[6] Knauss W G, Dietmann H. Crack propagation under variable load histories in linearly viscoelastic solids[J]. Internat J Engng Sci,1970,8:643-656.
[7] Knauss W G, Delayed failure-the Griffith problem for linearly viscoelastic materials[J]. International Journal of Fracture Mechanics,1970,6(1):7-20.
[8] Wnuk M P. Subcritical growth of fracture (inelastic fatigue)[J]. International Journal of Fracture Mechanics,1971,7(4):383-407.
[9] Liang R Y, Zhou J. Energy based approach for crack initiation and propagation in viscoelastic solid[J]. Engineering Fracture Mechanics,1997,58(1/2):71-85.
[10] Frassine R, Ring M, Leggio A, et al. Experimental analysis of viscoelastic criteria for crack initiation and growth in polymers[J]. International Journal of Fracture,1996,81(1):55-75.
[11] Alfrey T. Non-homogeneous stresses in viscoelastic media[J]. Quarterly Applied Mathematics,1944,2(113):113-119.
[12] Sills L B, Benvensite Y. Steady state propagation of a mode 3 interface crack in an inhomogenous viscoelastic media[J]. Internat J Engng Sci,1981,19(6):1255-1268.
[13] Ryvkin M, Banks-Sills L. Mode Ⅲ delamination of a viscoelastic strip from a dissimilar viscoelastic half-plane[J]. Internat J Solids and Structures,1994,31:551-566.
[14] Williams J G. On the calculation of energy release rates for cracked laminates[J]. International Journal of Fracture,1988,36(2):101-119.
[15] Huet C. Minimum theorem for viscoelasticity[J]. Eur J Mech A/Solids,1992,11(5):653-684.

ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES

ON THE CALCULATION OF ENERGY RELEASE RATE FOR VISCOELASTIC CRACKED LAMINATES

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	M. GHADIRI H. GHASEMI. Numerical methods for solving singular integral equations obtained by fracture mechanical analysis of cracked wedge[J]. Applied Mathematics and Mechanics (English Edition), 2014, 35(3): 311-324.
[2]	马开平;柳春图. SEMI-WEIGHT FUNCTION METHOD ON COMPUTATION OF STRESS INTENSITY FACTORS IN DISSIMILAR MATERIALS[J]. Applied Mathematics and Mechanics (English Edition), 2004, 25(11): 1241-1248.
[3]	王承强;郑长良. SEMI-ANALYTICAL FINITE ELEMENT METHOD FOR FICTITIOUS CRACK MODEL IN FRACTURE MECHANICS OF CONCRETE[J]. Applied Mathematics and Mechanics (English Edition), 2004, 25(11): 1265-1270.
[4]	吕念春;程云虹;胥红敏;程靳;唐立强. DYNAMIC CRACK MODELS ON PROBLEM OF BRIDGING FIBER PULL-OUT OF COMPOSITE MATERIALS[J]. Applied Mathematics and Mechanics (English Edition), 2004, 25(10): 1194-1202.
[5]	李范春;赵文胜;汤龙生. ELASTIC-VISCOPLASTIC FIELDS NEAR THE TIP OF A PROPAGATING CRACK UNDER ANTI-PLANE SHEAR[J]. Applied Mathematics and Mechanics (English Edition), 2004, 25(9): 1075-1082.
[6]	陶昉敏;汤任基. THE CRACK-INCLUSION INTERACTION AND THE ANALYSIS OF SINGULARITY FOR THE HORIZONTAL CONTACT[J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(5): 547-556.
[7]	王旭;沈亚鹏. ANALYSIS OF A PARTIALLY DEBONDED CONDUCTING RIGID ELLIPTICAL INCLUSION IN A PIEZOELECTRIC MATRIX[J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(1): 35-52.
[8]	汤任基;汤昕燕. METHOD TO CALCULATE BENDING CENTER AND STRESS INTENSITY FACTORS OF CRACKED CYLINDER UNDER SAINT-VENANT BENDING[J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(1): 79-88.
[9]	高存法;樊蔚勋. AN INTERFACE INCLUSION BETWEEN TWO DISSIMILAR PIEZOELECTRIC MATERIALS[J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(1): 96-104.
[10]	李春雨;邹振祝;段祝平. DYNAMIC STRESS FIELD AROUND THE MODE Ⅲ CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL[J]. Applied Mathematics and Mechanics (English Edition), 2000, 21(6): 651-658.