AN INVESTIGATION OF RANDOM FATIGUE STRENGTH OF K-TYPE TUBULAR JOINTS AND CRACK PROPAGATION BEHAVIORS

Abstract

2010 MSC Number:

O346.1

NIE Guo-hua;ZHANG Ruo-jing;LIU Ren-huai . AN INVESTIGATION OF RANDOM FATIGUE STRENGTH OF K-TYPE TUBULAR JOINTS AND CRACK PROPAGATION BEHAVIORS. Applied Mathematics and Mechanics (English Edition), 2001, 22(6): 642-649.

TrendMD

References

[1] Dover W D, Holdbrook S J, Hibberd R D, et al. Fatigue crack growth in T joints; out-of-plane bending [A]. Proc OTC[C]. Paper 3252, Houston: Taxas, 1978.
[2] Dover W D, Chaudhury G K, Dharmavasan S. Experimental and finite element comparisons of local stresses and compliance in tubular welded T joints [A]. Proc Int Conf on Steel in Marine Structure [C]. Paper No.4.3,Paris, 1981.
[3] Gibstein M B. Fatigue strength of welded tubular joints tested at det norske veritas laboratories[A]. Proc Int Conf on Steel in Marine Structures[C]. Paper No 8.4,Paris, 1981.
[4] Clayton A M. Assessment of UKOSRP crack growth data to investigate the remaining life of offshore structures after inspection [R]. UKAEA, Report No ND-R-852(R), HSMO, London,1982.
[5] Paris P, Erdogan F. A critical analysis of crack propagation laws [J]. Journal of Basic Engineering, Trans ASME, 1963,85:528-534.
[6] Aamodt B. Application of finite element method to problems in linear and nonlinear fracture mechanics [D]. Dr-Ing thesis. Trondheim, Norway: The Norwegian Institute of Technology, 1974.
[7] Newman J C, Raju I S. An empirical stress-intensity factor equation for the surface crack [J]. Engineering Fracture Mechanics, 1981,15(1-2): 185-192.
[8] Shang-Xian W. Shape change of surface crack during fatigue growth [J]. Engineering Fracture Mechanics, 1985,22(5): 897-913.
[9] Delft D R V, Dijkstra O D, Snijder H H. The calculation of fatigue crack growth in welded tubular joints using fracture mechanics [A]. Proc OTC[C]. Paper 5352, Houston: Taxas, 1986.
[10] ZHANG Yan-hong, LIU Chun-tu, MEI Hong. The fatigue life prediction of welded joints by using statistical analysis method [J]. Ocean Engineering, 1990,8(4): 15-23. (in Chinese)
[11] Nie G H, Weng Z Y. A random numerical simulation analysis of fatigue strength of tubular joints in offshore platforms [A]. Proc of Int Conf on Comp Meth in Struct and Geotech Engng [C]. Hong Kong: The University of Hong Kong, 1994, 1226-1231.
[12] NIE Guo-hua, WENG Zhi-yuan, LIU Ren-huai. Application of the probabilistic fracture mechanics to predicting the fatigue life of tubular joints [J]. Applied Mathematics and Mechanics (English Edition,) 1994,15(11): 1017-1023.
[13] Lawrence F V, Ho N J, Mazumdar P K. Predicting the fatigue resistance of welds [J]. Ann Rev Mater Sci, 1981,11:401-425.
[14] Dijkstra O D, Snijder H H, Overbeeke J L, et al. Prediction of fatigue crack growth for welded joints using stress intensity factors determined by FEM calculations [A]. Steel in Marine Structures [C]. Amsterdam: The Netherlands, 1987,885-899.
[15] Wylde J G, McDonald A. The influence of joint dimensions on the fatigue strength of welded tubular joints[A]. Proceedings of the Second International Conference on Behavior of Off-Shore Structures[C]. London: England, 1979,535-550.
[16] McDonald A, Wylde J G. Experimental Results of Fatigue Tests on Tubular Welded Joints, Fatigue in Off-Shore Structural Steels [M]. London, England: Thomas Telford Ltd, 1981,89-100.