[1] WANG Zhong-mao, LU Wan-heng, HU Jiang-ming. Mechanism, Prevention and Cure of Casing Failure of Oil and Water Wells in Oil Field [M]. Beijing:Oil Industry Press, 1994, 61-126. (in Chinese). [2] Williams ML. The stress around a fault or crack in dissimilarmedia[J]. Bulletin of the Seismologicai Society of America, 1959, 49(2):199-204. [3] Comninou M. The interface crack[J]. J Appl Mech, 1977, 44(4):631-636. [4] Delale F, Erdogan F. On the mechanical modeling of the interfacial region bonded half-plane[J]. ASME J Appl Mech, 1988, 55(2):317-324. [5] Shih C F, Asaro RJ. Elastic-plastic analysis of crack on bi-material interfaces-Part Ⅰ:Small scale yielding[J]. J Appl MecA, 1988, 55(2):299-316. [6] Shih C F, Asaro R J. Elastic-plastic analysis of crack on bi-material interfaces-Part Ⅱ:Structure of small scale yielding fields[J]. J Appl Mech, 1989, 56(4):763-779. [7] Wang T C. Elastic-plastic asymptotic fields for cracks on bimaterial interfaces [J]. Engng Fracture Mech, 1990, 37(3):527-538. [8] Hui C Y, Riedel H. The asymptotic stress and strain field near the tip of a growing crack under creep condition [J]. Int J Fracture, 1981, 17(4):409-425. [9] Gao Y C. Further study on strain singularity behavior of moving crack in elastic-viscoplastic materials[J]. Theoretical and Applied Fracture Mechanics, 1990, 14(3):233-242. [10] Taher M, Saif A, Hui C Y. Plane strain asymptotic field of a crack growing along an elastic-elastic power law creeping bimaterial interface[J]. J Mech Phys Solids, 1994, 42(2):181-214. [11] TangLQ, SunX G, WangZQ. Near tip field for stationary growth crack at the interface between an elastononlinear viscous material and an elastic solid[J]. Acta Mechanica Solida Sinica, 1995, 8(suppl):646-649. [12] LI Yong-dong, TANG Li-qiang. Asymptotic solution of Mode stationary growth crack on rigidelastic power low creeping bimaterial interface[J]. J Harbin En gineering University, 2000, 21(2):58-66. (in Chinese). [13] LI Yong-dong. Research on the mechanism of casing failure of oil and water wells by fracture mechanical methods[D]. Thesis for Ph D Degree. Harbin:Harbin Engineering University, 2001. (in Chinese). |