Articles

Generation of linear and nonlinear waves in numerical wave tank using clustering technique-volume of fluid method

Expand
  • 1. Department of Civil Engineering, Ferdowsi University, Mashhad 91779-4897, Iran;
    2. Faculty of Marine Technology, Amirkabir University of Technology, Tehran 15875-4413, Iran

Received date: 2011-09-13

  Revised date: 2012-03-28

  Online published: 2012-09-10

Abstract

A two-dimensional (2D) numerical model is developed for the wave simulation and propagation in a wave flume. The fluid flow is assumed to be viscous and incompressible, and the Navier-Stokes and continuity equations are used as the governing equations. The standard k-ε model is used to model the turbulent flow. The Navier-Stokes equations are discretized using the staggered grid finite difference method and solved by the simplified marker and cell (SMAC) method. Waves are generated and propagated using a piston type wave maker. An open boundary condition is used at the end of the numerical flume. Some standard tests, such as the lid-driven cavity, the constant unidirectional velocity field, the shearing flow, and the dam-break on the dry bed, are performed to valid the model. To demonstrate the capability and accuracy of the present method, the results of generated waves are compared with available wave theories. Finally, the clustering technique (CT) is used for the mesh generation, and the best condition is suggested.

Cite this article

H. SAGHI;M. J. KETABDARI;S. BOOSHI . Generation of linear and nonlinear waves in numerical wave tank using clustering technique-volume of fluid method[J]. Applied Mathematics and Mechanics, 2012 , 33(9) : 1179 -1190 . DOI: 10.1007/s10483-012-1614-9

References

[1] Contento, G. Numerical wave tank computations of nonlinear motions of two-dimensional arbitrarilyshaped free floating bodies. Ocean Engineering, 27, 531-556 (2000)
[2] Grilli, S. T., Vogelmenn, S., and Watts, P. Development of a 3D numerical wave tank for modelingtsunami generation by underwater landslides. Engineering Analysis with Boundary Elements, 26,301-313 (2002)
[3] Fochesato, C., Grilli, S., and Dias, F. Numerical modeling of extreme rogue waves generated bydirectional energy focusing. Wave Motion, 44, 395-416 (2007)
[4] Ducrozet, G., Bonnefoy, F., Le Touzé, D., and Ferrant, P. A modified high-order spectral methodfor wavemaker modeling in a numerical wave tank. European Journal of Mechanics B/Fluids, 34,19-34 (2012)
[5] Park, J. C., Kim, M. H., Miyata, H., and Chun, H. H. Fully nonlinear numerical wave tank (NWT)simulations and wave run-up prediction around 3D structures. Ocean Engineering, 30, 1969-1996(2003)
[6] Li, Y. and Lin, M. Regular and irregular wave impacts on floating body. Ocean Engineering, 42,93-101 (2012)
[7] Rudman, M. Volume-tracking methods for interfacial flow calculations. International Journal forNumerical Methods in Fluids, 24, 671-691 (1997)
[8] Troch, P. and de Rouck, J. An active wave generating-absorbing boundary condition for VOFtype numerical model. Coastal Engineering, 38, 223-247 (1999)
[9] Choi, J. W. and Yoon, S. B. Numerical simulation using momentum source wave-maker appliedRANS equation model. Coastal Engineering, 56, 1043-1060 (2009)
[10] Zhao, X. Z., Hu, C. H., and Sun, Z. C. Numerical simulation of extreme wave generation usingVOF method. Journal of Hydrodynamics, 22, 466-477 (2010)
[11] Schäffer, H. A. and Steenberg, C. M. Second-order wavemaker theory for multidirectional waves.Ocean Engineering, 30, 1203-1231 (2003)
[12] Teng, B. and Ning, D. Z. A simplified model for extreme-wave kinematics in deep sea. Journal ofMarine Science and Application, 8, 27-32 (2009)
[13] Wei, G., Le, J. C., and Dai, S. Q. Surface effects of internal wave generated by a moving sourcein a two-layer fluid of finite depth. Applied Mathematics and Mechanics (English Edition), 24(9),1025-1040 (2003) DOI 10.1007/BF02437635
[14] Lara, J. L., Garcia, N., and Losada, I. J. RANS modelling applied to random wave interactionwith submerged permeable structure. Coastal Engineering, 113, 396-417 (2006)
[15] Lin, P. and Karunarathna, S. A. S. Numerical study of solitary wave interaction with porousbreakwaters. Journal of Waterway, Port, Coastal and Ocean Engineering, 133(5), 352-363 (2007)
[16] Shin, S., Bae, S. Y., Kim, I. C., Kim, Y. J., and Yoo, H. K. Simulation of free surface flowsusing the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method.International Journal for Numerical Methods in Fluids, 68, 360-376 (2012)
[17] Rafei, R. Numerical Solution of Incompressible 3D Turbulent Flow in a Spiral Channel, M. Sc.dissertation, Amirkabir University of Technology (2004)
[18] Li, C. W. and Zang, Y. F. Simulation of free surface recirculating flows in semi-enclosed waterbodies by a k-w model. Applied Mathematical Modeling, 22, 153-164 (1998)
[19] Gao, H., Gu, H. Y., and Guo, L. J. Numerical study of stratified oil-water two-phase turbulentflow in a horizontal tube. International Journal of Heat and Mass Transfer, 46, 749-754 (2003)
[20] Ren, B. and Wang, Y. Numerical simulation of random wave slamming on structures in the splashzone. Ocean Engineering, 31, 547-560 (2004)
[21] Shen, Y. M., Ng, C. O., and Zheng, Y. H. Simulation of wave propagation over a submergedbar using the VOF method with a two-equation k-ε turbulence modeling. Ocean Engineering, 31,87-95 (2004)
[22] Mirbagheri, S. M. H., Dadashzadeh, M., Serajzadeh, S., Taheri, A. K., and Davami, P. Modelingthe effect of mould wall roughness on the melt flow simulation in casting process. AppliedMathematical Modeling, 28, 933-956 (2004)
[23] Geuyffier, D., Li, J., Nadim, A., Scardovelli, R., and Zaleski, S. Volume-of-fluid interface trackingwith smoothed surface stress methods for three-dimensional flows. Journal of ComputationalPhysics, 152, 423-456 (1999)
[24] Harvie, D. J. E. and Fletcher, D. F. A new volume of fluid advection algorithm: the defineddonating region scheme. International Journal for Numerical Methods in Fluids, 35, 151-172(2001)
[25] Ketabdari, M. J., Nobari, M. R. H., and Moradi-Larmaei, M. Simulation of waves group propagationand breaking in coastal zone using a Navier-Stokes solver with an improved VOF free surfacetreatment. Applied Ocean Research, 30, 130-143 (2008)
[26] Hur, D. S. and Mizutani, M. Numerical estimation of the wave forces acting on a three-dimensionalbody on submerged breakwater. Coastal Engineering, 47, 329-345 (2003)
[27] Duff, E. S. Fluid Flow Aspects of Solidification Modeling, Simulation of Low Pressure Die Casting,Ph. D. dissertation, University of Queenland (1999)
[28] Ghia, U., Ghia, K. N., and Shin, C. T. High-Re solutions for incompressible flow using the Navier-Stokes equations and a multigrid method. Journal of Computational Physics, 48, 387-411 (1982)
[29] Scardovelli, R. and Zaleski, S. Interface reconstruction with least-square fit and split Eulerian-Lagrangian advection. International Journal of Numerical Methods in Fluids, 41, 251-274 (2003)
[30] Martin, J. C. and Moyce, W. J. An experimental study of the collapse of liquid columns on a rigidhorizontal plane. Philosophical Transaction of the Royal Society of London, 244, 312-324 (1982)
[31] Boussinesq, M. J. Théorie de l’intumescence liquide, appelée onde solitaire ou de translation, sepropageant dans un canal rectangulaire. Comptes Rendus de l’Académie des Scinces, 72, 755-759(1871)
[32] Rayleigh, L. On waves. Philosophical Magazine, 1, 257-279 (1876)
[33] Clamond, D. and Germain, J. P. Interaction between a Stokes wave packet and a solitary wave.European Journal of Mechanics B/Fluids, 18, 67-91 (1999)
[34] Temperville, A. Contribution a l’étude des Ondes de Gravité en Eau Peu Profonde, Thèse d’Etat,Université Joseph Fourier (1985)

Outlines

/

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals