Applied Mathematics and Mechanics (English Edition) ›› 2012, Vol. 33 ›› Issue (8): 1049-1058.doi: https://doi.org/10.1007/s10483-012-1604-x

• 论文 • 上一篇    下一篇

Equilibrium equations for 3D critical buckling of helical springs

武秀根1, 郑百林2, 贺鹏飞2, 刘曙光1   

  1. 1. Department of Hydraulic Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, P. R. China;
    2. School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, P. R. China
  • 收稿日期:2011-12-01 修回日期:2012-04-09 出版日期:2012-08-10 发布日期:2012-08-10
  • 通讯作者: Bai-lin ZHENG, Professor, Ph.D., E-mail: blzheng@tongji.edu.cn E-mail:blzheng@tongji.edu.cn
  • 基金资助:

    Project supported by the National Natural Science Foundation of China (No. 11002101)

Equilibrium equations for 3D critical buckling of helical springs

Xiu-gen WU1, Bai-lin ZHENG2, Peng-fei HE2, Shu-guang LIU 1   

  1. 1. Department of Hydraulic Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, P. R. China;
    2. School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, P. R. China
  • Received:2011-12-01 Revised:2012-04-09 Online:2012-08-10 Published:2012-08-10
  • Supported by:

    Project supported by the National Natural Science Foundation of China (No. 11002101)

摘要: In most cases, the research on the buckling of a helical spring is based on the column, the spring is equivalent to the column, and the torsion around the axial line is ignored. A three-dimensional (3D) helical spring model is considered in this paper. The equilibrium equations are established by introducing two coordinate systems, the Frenet and the principal axis coordinate systems, to describe the spatial deformation of the center line and the torsion of the cross section of the spring, respectively. By using a small deformation assumption, the variables of the deflection can be expanded into Taylor’s series, and the terms of high orders are ignored. Hence, the equations can be simplified to the functions of the twist angle and the arc length, which can be solved by a numerical method. The reaction loads of the spring caused by the axial load subjected to the center point are also discussed, giving the boundary conditions for the solution to the equilibrium equations. The present work is useful to the research on the behavior of the post-buckling of the compressed helical spring.

关键词: Melnikov method, perturbed integrable system, transversely homoclinic, chaos

Abstract: In most cases, the research on the buckling of a helical spring is based on the column, the spring is equivalent to the column, and the torsion around the axial line is ignored. A three-dimensional (3D) helical spring model is considered in this paper. The equilibrium equations are established by introducing two coordinate systems, the Frenet and the principal axis coordinate systems, to describe the spatial deformation of the center line and the torsion of the cross section of the spring, respectively. By using a small deformation assumption, the variables of the deflection can be expanded into Taylor’s series, and the terms of high orders are ignored. Hence, the equations can be simplified to the functions of the twist angle and the arc length, which can be solved by a numerical method. The reaction loads of the spring caused by the axial load subjected to the center point are also discussed, giving the boundary conditions for the solution to the equilibrium equations. The present work is useful to the research on the behavior of the post-buckling of the compressed helical spring.

Key words: Melnikov method, perturbed integrable system, transversely homoclinic, chaos

中图分类号: 

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals