Applied Mathematics and Mechanics (English Edition) ›› 1983, Vol. 4 ›› Issue (1): 69-77.

• Articles • 上一篇    下一篇

DYNAMIC OPTIMIZATION OF TIMOSHENKO BEAM

程耿东1, 丁桦2   

  1. 1. Research Institute of Engineering Mechanics;
    2. Institute of Technology, Dalian
  • 收稿日期:1982-01-24 出版日期:1983-01-18 发布日期:1983-01-18

DYNAMIC OPTIMIZATION OF TIMOSHENKO BEAM

Cheng Keng-tung1, Ding Hua2   

  1. 1. Research Institute of Engineering Mechanics;
    2. Institute of Technology, Dalian
  • Received:1982-01-24 Online:1983-01-18 Published:1983-01-18

摘要: The present paper discusses the minimum weight design problem for Timoshenko and Euler beams subjected to multi-frequency constraints. Taking the simply-supported symmetric beam as an example,we reveal the abnormal characteristics of optimal Timoshenko beams,i.e.,the frequency corresponding to the first symmetric vibration mode could be higher than the frequency of antisymmetric vibration mode if a very thin and high strip is suitably formed at the middle of the beam,and,optimal Timoshenko beams subjected to two different sets of frequency.constraints could have the same minimum weight. The above abnormal characteristics demonstrate the need for including maximum cross sectional area constraint in the problem formulation in order to have a well-posed problem.

关键词: neutral type equation, 2T-periodic solution, Fourier series

Abstract: The present paper discusses the minimum weight design problem for Timoshenko and Euler beams subjected to multi-frequency constraints. Taking the simply-supported symmetric beam as an example,we reveal the abnormal characteristics of optimal Timoshenko beams,i.e.,the frequency corresponding to the first symmetric vibration mode could be higher than the frequency of antisymmetric vibration mode if a very thin and high strip is suitably formed at the middle of the beam,and,optimal Timoshenko beams subjected to two different sets of frequency.constraints could have the same minimum weight. The above abnormal characteristics demonstrate the need for including maximum cross sectional area constraint in the problem formulation in order to have a well-posed problem.

Key words: neutral type equation, 2T-periodic solution, Fourier series

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals