Molybdenum disulfide and magnesium oxide nanoparticle performance on micropolar Cattaneo-Christov heat flux model

doi:10.1007/s10483-021-2713-9

Abstract

Abstract: This article intends to illustrate the Darcy flow and melting heat transmission in micropolar liquid. The major advantage of micropolar fluid is the liquid particle rotation through an independent kinematic vector named the microrotation vector. The novel aspects of the Cattaneo-Christov (C-C) heat flux and Joule heating are incorporated in the energy transport expression. Two different nanoparticles, namely, MoS₂ and MgO, are suspended into the base-fluid. The governing partial differential equations (PDEs) of the prevailing problem are slackening into ordinary differential expressions (ODEs) via similarity transformations. The resulting mathematical phenomenon is illustrated by the implication of fourth-fifth order Runge-Kutta-Fehlberg (RKF) scheme. The fluid velocity and temperature distributions are deliberated by using graphical phenomena for multiple values of physical constraints. The results are displayed for both molybdenum disulphide and magnesium oxide nanoparticles. A comparative benchmark in the limiting approach is reported for the validation of the present technique. It is revealed that the incrementing material constraint results in a higher fluid velocity for both molybdenum disulphide and magnesium oxide nanoparticle situations.

Key words: micropolar fluid, Cattaneo-Christov (C-C) heat flux, molybdenum disulphide nanoparticle, melting effect, numerical solution

2010 MSC Number:

76Sxx
76Bxx

M. G. REDDY, S. A. SHEHZAD. Molybdenum disulfide and magnesium oxide nanoparticle performance on micropolar Cattaneo-Christov heat flux model. Applied Mathematics and Mechanics (English Edition), 2021, 42(4): 541-552.

TrendMD

References

[1] CHOI, S. U. S. and EASTMAN, J. A. Enhancing thermal conductivity of fluids with nanoparticles. ASME-Publications-Fed, 231, 99-106(1995)
[2] GHOLINIA, M., GHOLINIA, S., HOSSEINZADEH, K., and GANJI, D. D. Investigation on ethylene glycol nanofluid flow over a vertical permeable circular cylinder under effect of magnetic field. Results in Physics, 9, 1525-1533(2018)
[3] ASHJAEE, M., GOHARKHAH, M., KHADEM, L. A., and AHMADI, R. Effect of magnetic field on the forced convection heat transfer and pressure drop of a magnetic nanofluid in a miniature heat sink. Heat and Mass Transfer, 51, 953-964(2015)
[4] PATEL, R. H., MITTAL, S. A., and DARJI, R. R. MHD flow of micropolar nanofluid over a stretching/shrinking sheet considering radiation. Internal Communications in Heat and Mass Transfer, 108, 104322(2019)
[5] VENKATESWARLU, S., VARMA, S. V., and PRASAD, P. D. MHD flow of MoS₂ and MgO water-based nanofluid through porous medium over a stretching surface with Cattaneo-Christov heat flux model and convective boundary condition. International Journal of Ambient Energy, (2020) https://doi.org/10.1080/01430750.2020.1785939
[6] MOHAMMAD, G., SABOUR, M., POP, I., and WEN, D. S. Free convection heat transfer of MgO-MWCNTs/EG hybrid nanofluid in a porous complex shaped cavity with MHD and thermal radiation effects. International Journal of Numerical Methods for Heat and Fluid Flow, 29, 4349-4376(2019)
[7] TURKYILMAZOGLU, M. Fully developed slip flow in a concentric annuli via single and dual phase nanofluids models. Computer Methods and Programs in Biomedicine, 179, 104997(2019)
[8] MEHRYAN, S. A. M., IZADI, M., NAMAZIAN, Z., and CHAMKHA, A. J. Natural convection of multi-walled carbon nanotube-Fe₃O₄/water magnetic hybrid nanofluid flowing in porous medium considering the impacts of magnetic field-dependent viscosity. Journal of Thermal Analysis and Calorimetry, 138, 1541-1555(2019)
[9] TURKYILMAZOGLU, M. Analytical solutions to mixed convection MHD fluid flow induced by a nonlinearly deforming permeable surface. Communications in Nonlinear Science and Numerical Simulation, 63, 373-379(2018)
[10] ZEESHAN, A., SHEHZAD, N., and ELLAHI, R. Analysis of activation energy in Couette-Poiseuille flow of nanofluid in the presence of chemical reaction and convective boundary conditions. Results in Physics, 8, 502-512(2018)
[11] EL-HALIEM, M. A., RAMZAN, M., and CHUNG, J. D. A numerical study of magnetohydrodynamic stagnation point flow of nanofluid with Newtonian heating. Journal of Computational and Theoretical NanoScience, 13, 8419-8426(2016)
[12] LU, D., RAMZAN, M., HUDA, N. U., CHUNG, J. D., and FAROOQ, U. Nonlinear radiation effect on MHD Carreau nanofluid flow over a radially stretching surface with zero mass flux at the surface. Scientific Reports, 8, 3709(2018)
[13] KHAN, M., HUMARA, S., and HASHIM. Heat generation/absorption and thermal radiation impacts on three dimensional flow of Carreau fluid with convective heat transfer. Journal of Molecular Liquids, 18, 474-480(2018)
[14] REDDY, M. G. and SANDEEP, N. Heat and mass transfer in radiative MHD Carreau fluid with cross diffusion. Ain Shams Engineering Journal, 9, 1189-1204(2018)
[15] CATTANEO, C. Sulla conduzionedelcalore. Atti del Seminario Matematico e Fisico dell Universita di Modena e Reggio Emilia, 3, 83-101(1948)
[16] CHRISTOV, C. I. On frame indifferent formulation of the Maxwell-Cattaneo model of finite-speed heat conduction. Mechanics Research Communications, 36, 481-486(2009)
[17] STRAUGHAN, B. Thermal convection with the Cattaneo-Christov model. International Journal of Heat and Mass Transfer, 53, 95-98(2010)
[18] HAYAT, T., AZIZ, A., MUHAMMAD, T., and ALSAEDI, A. Three-dimensional flow of Prandtl fluid with Cattaneo-Christov double diffusion. Results in Physics, 9, 290-296(2018)
[19] UPADHYA, S. M., RAJU, C. S. K., MAHESHA, and SALEEM, S. Nonlinear unsteady convection on micro and nanofluid with Cattaneo-Christov heat flux. Results in Physics, 9, 779-786(2018)
[20] REDDY, M. G. Cattaneo-Christov heat flux effect on hydromagnetic radiative Oldroyd-B liquid flow across a cone/wedge in the presence of cross-diffusion. The European Physical Journal Plus, 133, 24(2018)
[21] MUSTAFA, M. Cattaneo-Christov heat flux model for rotating flow and heat transfer of upper convected Maxwell fluid. AIP Advances, 5, 47-109(2015)
[22] WAQAS, M., HAYAT, T., FAROOQ, M., SHEHZAD, S. A., and ALSAEDI, A. Cattaneo-Christov heat flux model for flow of variable thermal conductivity generalized Burgers fluid. Journal of Molecular Liquids, 220, 642-648(2016)
[23] HAYAT, T., FAROOQ, M., ALSAEDI, A., and AL-SOLAMY, F. Impact of Cattaneo-Christov heat flux in the flow over a stretching sheet with variable thickness. AIP Advances, 5, 87-159(2016)
[24] BAKIER, A. Y. Aiding and opposing mixed convection flow in melting from a vertical flat plate embedded in a porous medium. Transport in Porous Media, 29, 127-139(1997)
[25] CHENG, W. T. and LIN, C. H. Melting effect on mixed convective heat transfer with aiding and opposing external flows from the vertical plate in a liquid-saturated porous medium. International Journal of Heat and Mass Transfer, 50, 3026-3034(2007)
[26] DINH, M. T., TLILI, I., DARA, R. N., SHAFEE, A., AL-JAHMANY, Y. Y. Y., and NGUYEN-THOI, T. Nanomaterial treatment due to imposing MHD flow considering melting surface heat transfer. Physica A:Statistical Mechanics and its Applications, 541, 123036(2020)
[27] MUHAMMAD, K., HAYAT, T., ALSAEDI, A., and AHMAD, B. Melting heat transfer in squeezing flow of basefluid (water), nanofluid (CNTs+water) and hybrid nanofluid (CNTs+CuO+water). Journal of Thermal Analysis and Calorimetry, 143, 1157-1174(2021)
[28] HAYAT, T., SHAH, F., ALSAEDI, A., and AHMAD, B. Entropy optimized dissipative flow of effective Prandtl number with melting heat transport and Joule heating. International Communications in Heat and Mass Transfer, 111, 104454(2020)
[29] KOK, B. Examining effects of special heat transfer fins designed for the melting process of PCM and nano-PCM. Applied Thermal Engineering, 170, 114989(2020)
[30] MEHRYAN, S. A. M., VAEZI, M., SHEREMET, M., and GHALAMBAZ, M. Melting heat transfer of power-law non-Newtonian phase change nano-enhanced n-octadecane-mesoporous silica (MPSiO₂). International Journal of Heat and Mass Transfer, 151, 119385(2020)