Bifurcation on synchronous full annular rub of rigid-rotor elastic-support system

doi:10.1007/s10483-012-1591-7

Abstract

Abstract: An aero-engine rotor system is simplified as an unsymmetrical-rigid-rotor with nonlinear-elastic-support based on its characteristics. Governing equations of the rubbing system, obtained from the Lagrange equation, are solved by the averaging method to find the bifurcation equations. Then, according to the two-dimensional constraint bi-furcation theory, transition sets and bifurcation diagrams of the system with and without rubbing are given to study the influence of system eccentricity and damping on the bi-furcation behaviors, respectively. Finally, according to the Lyapunov stability theory, the stability region of the steady-state rubbing solution, the boundary of static bifurcation, and the Hopf bifurcation are determined to discuss the influence of system parameters on the evolution of system motion. The results may provide some references for the designer in aero rotor systems.

Key words: tension structure, form finding, form function, unsymmetrical-rigid-rotor elastic-support system, rubbing, two-dimensional constraint bifurcation theory, stability

2010 MSC Number:

O322
V235.1

Hua-biao ZHANG;Yu-shu CHEN;Jun LI. Bifurcation on synchronous full annular rub of rigid-rotor elastic-support system. Applied Mathematics and Mechanics (English Edition), 2012, 33(7): 865-880.

TrendMD

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: https://www.amm.shu.edu.cn/EN/10.1007/s10483-012-1591-7

https://www.amm.shu.edu.cn/EN/Y2012/V33/I7/865

References

[1] Yan, L. T. Vibration and Vibration Reduction of Aero Gas Turbine (in Chinese), National DefenseIndustrial Press, Beijing (1991)
[2] Wang, D. Y. Rubbing between rotor and stator of rotation machinery (in Chinese). Aero Engine,2, 37-41 (1998)
[3] Ehrich, F. F. High order subharmonic response of high speed rotors in bearing clearance. Journalof Vibration, Acoustics, Stress, and Reliability in Design, 110(1), 9-16 (1988)
[4] Li, Q. H. and Lu, Q. S. Single rub-impacting periodic motions of a rigid constrained rotor system.Communication of Nonlinear Science & Numerical Simulation, 4, 158-161 (2000)
[5] Chu, F. L., Tang, X. Y., and Tang, Y. Stability of a rub-impact rotor system (in Chinese). Journalof Tsinghua University (Science and Technology), 40, 119-123 (2000)
[6] Kim, Y. B. and Noah, S. T. Bifurcation analysis for a modified Jeffcott rotor with bearing clear-ances. Nonlinear Dynamics, 1, 221-241 (1990)
[7] Kim, Y. B. and Noah, S. T. Quasi-periodic response and stability analysis for a nonlinear Jeffcottrotor. Journal of Sound and Vibration, 190(2), 239-253 (1996)
[8] Khanlo, M. H., Ghayour, M., and Rad, Z. S. Chaotic vibration analysis of rotating, flexible,continuous shaft-disk system with a rub-impact between the disk and the stator. Communicationsin Nonlinear Science & Numerical Simulation, 16(1), 566-582 (2011)
[9] Muszynska, A. and Goldman, P. Chaotic responses of unbalanced rotor/bearing/stator systemswith looseness or rubs. Chaos, Solitons & Fractals, 5(9), 1683-1704 (1995)
[10] Chang-Jian, C. W. and Chen, C. K. Chaos of rub-impact rotor supported by bearings withnonlinear suspension. Tribology International, 42(3), 426-439 (2009)
[11] Qin, W. Y., Chen, G. R., and Meng, G. Nonlinear responses of a rub-impact overhung rotor.Chaos, Solitons & Fractals, 19(5), 1161-1172 (2004)
[12] Jiang, J., Shang, Z. Y., and Hong, L. Characteristics of dry friction backward whirl—a self-excitedoscillation in rotor-to-stator contact systems. Science China Technological Sciences, 53(3), 674-683 (2010)
[13] Wilkes, J. C., Childs, D. W., and Dyck, B. J. The numerical and experimental characteristicsof multimode dry-friction whip and whirl. Journal of Engineering for Gas Turbines and Power,132(5), 785-794 (2010)
[14] Yu, J. J. On occurrence of reverse full annular rub. Journal of Engineering for Gas Turbines andPower, 134(1), 219-227 (2012)
[15] Patel, T. H. and Darpe, A. K. Coupled bending-torsional vibration analysis of rotor with rub andcrack. Journal of Sound and Vibration, 326(3-5), 740-752 (2009)
[16] Luo, Y. G., Ren, Z. H., Ma, H., Yu, T., and Wen, B. C. Stability of periodic motion on therotor-bearing system with coupling faults of crack and rub-impact. Journal of Mechanical Scienceand Technology, 21(6), 860-864 (2007)
[17] Ehehalt, U., Markert, R., and Wegener, G. Stability of synchronous forward whirl at rotor-stator-contact. ISROMAC-9 Conference, Honolulu, Hawaii, 1-8 (2002)
[18] Ehehalt, U. and Markert, R. Instability of unbalance excited synchronous forward whirl at rotor-stator-contact. Proceedings of the Applied Mathematics and Mechanics, 2(1), 60-61 (2003)
[19] Black, H. F. Interaction of a whirling rotor with a vibrating stator across a clearance annulus.International Journal of Mechanical Engineering Science, 10, 1-12 (1968)
[20] Begg, I. C. Friction induced rotor whirl—a study in stability. Journal of Engineering for Industry,Transactions of the ASME, 96(2), 450-454 (1974)
[21] Stackley, S. J. Dynamics of Full Annular Rotor Rub, M. Sc. dissertation, Massachusetts Instituteof Technology, USA (1986)
[22] Yu, J. J., Goldman, P., and Bently, D. E. Rotor/seal experimental and analytical study on fullannular rub. ASME Journal of Engineering Gas Turbine Power, 124, 340-350 (2002)
[23] Muszynska, A. Rotordynamics, CRC Press, Florida (2005)
[24] Bently, D. E., Yu, J. J., and Goldman, P. Full annular rub in mechanical seals, part I: experimentresults. ISROMAC-8 Conference, Honolulu, Hawaii, 995-1002 (2000)
[25] Bently, D. E., Yu, J. J., and Goldman, P. Full annular rub in mechanical seals, part II: analyticalstudy. ISROMAC-8 Conference, Honolulu, Hawaii, 1003-1010 (2000)
[26] Choi, Y. S. Investigation on the whirling motion of full annular rotor rub. Journal of Sound andVibration, 258, 191-198 (2002)
[27] Ma, J. M., Zhang, W., and Zheng, T. S. Analysis for rub-impact condition of Jeffcott rotor (inChinese). Grinder Grinding, S1, 68-70 (2003)
[28] Ma, J. M., Zhang, W., and Zheng, T. S. Influence of rotor system parameters on critical rotationspeed for rubbing (in Chinese). Journal of Southwest Jiaotong University, 38, 537-539 (2003)
[29] Jiang, J. and Ulbrich, H. Dynamics and stability of rotor/stator systems with rubs. ASME Paper,No. 2000-GT-390 (2000)
[30] Jiang, J. and Ulbrich, H. Stability analysis of sliding whirl in a nonlinear Jeffcott rotor withcross-coupling stiffness coefficients. Nonlinear Dynamics, 24(3), 269-283 (2001)
[31] Xu, B., Xu, W. N., and Zhang, W. Study of synchronous full annular rub of Jeffcott rotor andits dynamic stability (in Chinese). Journal of Fudan University (Natural Science), 45, 148-154(2006)
[32] Zhang, G. F., Xu, W. N., Xu, B., and Zhang, W. Analytical study of nonlinear synchronous fullannular rub motion of flexible rotor-stator system and its dynamic stability. Nonlinear Dynamics,57, 579-592 (2009)
[33] Xu, W. N., Zhang, W., and Xu, B. Analytical study of synchronous full annular rub motion offlexible stator and rotor system (in Chinese). Journal of Vibration and Shock, 25, 1-9 (2007)
[34] Liu, X. D., Li, Q. H., and Yang, S. P. The stability and Hopf bifurcation in the annular impact-rubof rotating machinery with imbalance (in Chinese). Journal of Vibration Engineering, 12, 40-46(1999)
[35] Groll, G. V. and Ewins, D. J. The harmonic balance method with arc-length continuation inrotor/stator contact problems. Journal of Sound and Vibration, 241(2), 223-233 (2001)
[36] Jiang, J. and Ulbrich, H. Stability analysis of full annular rub in rotor-to-stator systems. Proceedingsof the Applied Mathematics and Mechanics, 2(1), 88-89 (2003)
[37] Shang, Z. Y., Jiang, J., and Hong, L. The influence of the cross-coupling effects on the dynamics ofrotor/stator rubbing. Proceedings of the Second Conference on Dynamics, Vibration and Control,Chendu, China (2009)
[38] Xie, H., Flowers, G. T., Feng, L., and Lawrence, C. Steady state dynamic behavior of a flexi-ble rotor with auxiliary support from a clearance bearing. Journal of Vibration and Acoustics,Transactions of the ASME, 121(1), 78-83 (1999)
[39] Cole, M. O. T. On stability of rotordynamic systems with rotor-stator contact interaction. Proceedingsof the Royal Society A: Mathematical, Physical and Engineering Sciences, 464(2100),3353-3375 (2008)
[40] Keogh, P. S. and Cole, M. O. T. Rotor vibration with auxiliary bearing contact in magnetic bearingsystems, part I: synchronous dynamics. Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science, 217(4), 377-392 (2003)
[41] Sahinkaya, M. N., Abulrub, A. H. G., and Keogh, P. S. Multiple sliding and rolling contact dy-namics for a flexible rotor/magnetic bearing system. IEEE/ASME Transactions on Mechatronics,12(2), 179-189 (2007)
[42] Zhong, Y. E., He, Y. Z., and Wang, Z. Rotor Dynamics (in Chinese), Tstinghua University Press,Beijing (1987)
[43] Chen, Y. S. and Leung, A. Y. T. Bifurcation and Chaos in Engineering, Springer, London (1998)
[44] Wu, Z. Q. and Chen, Y. S. Classification of bifurcations for nonlinear dynamical problems withconstraints. Applied Mathematics and Mechanics (English Edition), 23(5), 535-541 (2002) DOI10.1007/BF02437771
[45] Wu, Z. Q. and Chen, Y. S. New bifurcation patterns in elementary bifurcation problems withsingle-side constraint. Applied Mathematics and Mechanics (English Edition), 22(11), 1260-1267(2001) DOI 10.1007/BF02437849
[46] Wu, Z. Q., Ding, R., and Chen, Y. S. Classification of parametric constrained bifurcation. AppliedMathematics and Mechanics (English Edition), 31(2), 135-142 (2010) DOI 10.1007/s10483-010-0201-z
[47] Qin, Z. H., Chen, Y. S., and Li, J. Singularity analysis of a two-dimensional elastic cable with 1:1internal resonance. Applied Mathematics and Mechanics (English Edition), 31(2), 143-150 (2010)DOI 10.1007/s10483-010-0202-z
[48] Li, J. and Chen, Y. S. Transition sets of bifurcation of dynamical system with two state variableswith constraints. Applied Mathematics and Mechanics (English Edition), 33(2), 139-154 (2012)DOI 10.1007/s10483-012-1539-7

Related Articles 15

[1]	Xiaoye MAO, Kexin CHANG, Jie JING, Tianchang DENG, Hu DING, Liqun CHEN. Buckling and parametric excitation stability optimization of fluid-conveying pipes by frequency design [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(4): 675-694.
[2]	Hufei LI, Sha WEI, Hu DING, Liqun CHEN. Stochastic stability analysis of fluid-conveying pipes under multiplicative Gaussian white noise excitations [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(4): 741-766.
[3]	Pei ZHANG, P. SCHIAVONE, Luke ZHAO, Dongbo LI, Yanming REN, Hai QING. On well-posed local-nonlocal mixed integral model of piezoelectricity for dynamic stability and vibration analysis of piezoelectric Timoshenko nanobeams with general boundary constraints [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(4): 815-838.
[4]	Qian GENG, Xing ZHOU, Mengyang WANG, Xiongwei YANG, Zhushan SHAO, Yueming LI. Thermal stability design for flexural wave bandgap of metamaterial plates with perforated and pre-curved patterns [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(3): 443-472.
[5]	Jiashuo GUO, Le FANG. Stability of $k -$ $ε$ model in Kolmogorov flow [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(1): 165-184.
[6]	Hui MA, Hong GUAN, Lin QU, Xumin GUO, Qinqin MU, Yao ZENG, Yanyan CHEN. Dynamic modeling and simulation of blade-casing system with rubbing considering time-varying stiffness and mass of casing [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(5): 849-868.
[7]	Lu LU, Min LI, Shuang WANG. Surface effects on buckling instability and large deformation of magneto-active soft beams [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(4): 617-632.
[8]	Hongping GUO, Xun WANG, Zhijun SHEN. A low Mach number asymptotic analysis of dissipation-reducing methods for curing shock instability [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(4): 723-744.
[9]	B. S. SANJU, R. NAVEEN KUMAR, R. S. VARUN KUMAR, A. ABDULRAHMAN. Physics-informed neural network approach to analyze the onset of oscillatory and stationary convections in chemically triggered Navier-Stokes-Voigt fluid layer heated and salted from below [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(11): 2199-2220.
[10]	Hong GUAN, Hui MA, Tianrui YANG, Yanyan CHEN, Yao ZENG, Qinqin MU, Bangchun WEN. Dynamic modeling of a fully flexible rotor-stator system with bolt joint and rubbing-induced nonlinear vibration [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(10): 1939-1954.
[11]	N. HUMNEKAR, D. SRINIVASACHARYA. Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel [J]. Applied Mathematics and Mechanics (English Edition), 2024, 45(3): 563-580.
[12]	Haitao LI, Tianyu ZHENG, Weiyang QIN, Ruilan TIAN, Hu DING, J. C. JI, Liqun CHEN. Theoretical and experimental study of a bi-stable piezoelectric energy harvester under hybrid galloping and band-limited random excitations [J]. Applied Mathematics and Mechanics (English Edition), 2024, 45(3): 461-478.
[13]	Haiyang WU, Jiangfeng LOU, Biao ZHANG, Yuntong DAI, Kai LI. Stability analysis of a liquid crystal elastomer self-oscillator under a linear temperature field [J]. Applied Mathematics and Mechanics (English Edition), 2024, 45(2): 337-354.
[14]	Zhiyuan WU, Linchuan ZHAO, Han YAN, Ge YAN, Ao CHEN, Wenming ZHANG. Multi-blade rubbing characteristics of the shaft-disk-blade-casing system with large rotation [J]. Applied Mathematics and Mechanics (English Edition), 2024, 45(1): 111-136.
[15]	Chen ZHAO, Zhenli CHEN, C. T. MUTASA, Dong LI. Effects of layer interactions on instantaneous stability of finite Stokes flows [J]. Applied Mathematics and Mechanics (English Edition), 2024, 45(1): 69-84.