Transition analysis of meta-stable and bi-stable nonlinear behavior in piezoelectric vibration energy harvesting througha pre-shaped curved beam model

doi:10.1007/s10483-025-3319-6

摘要/Abstract

Abstract:

This work presents a piezoelectric vibration energy harvester (PVEH) featuring a pre-shaped curved beam with clamped boundaries to investigate its energy harvesting mechanism based on the intrinsic snap-through behavior. Since the ability of the beam to exhibit meta-stable and bi-stable states strongly depends on its geometric parameters, the potential energies of models with varying thicknesses and initial apex heights are analyzed, followed by the derivations of electromechanical coupled equations for both meta-stable and bi-stable systems. The effects of the geometric parameters of the curved beam on the nonlinear dynamic behaviors and energy harvesting efficiencies under different external excitations are examined. Series of experiments are tested to validate the theoretical analyses. The research findings show that the separation between the potential wells in the bi-stable beam is mainly governed by the thickness and initial apex height, while the potential barrier height is affected by both the geometric and material properties. The optimal energy harvesting efficiencies in the transition analyses of meta-stable and bi-stable states are achieved by tuning specific geometric parameters. Design guidelines are provided to maximize the bandwidth and efficiency for energy harvesting applications.

Key words: snap-through behavior, curved beam, piezoelectric vibration energy harvester (PVEH), potential energy

中图分类号:

O322

. [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(11): 2017-2034.

Jiajia MAO, Wei GAO, Chaoran LIU, Dongxing CAO, Siukai LAI. Transition analysis of meta-stable and bi-stable nonlinear behavior in piezoelectric vibration energy harvesting througha pre-shaped curved beam model[J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(11): 2017-2034.

图/表 13

参考文献 63

[1]	TOPRAK, A. and TIGLI, O. Piezoelectric energy harvesting: state-of-the-art and challenges. Applied Physics Reviews, 1(3), 031104 (2014)
[2]	ZOU, H. X., ZHANG, W. M., LI, W. B., WEI, K. X., GAO, Q. H., PENG, Z. K., and MENG, G. Design and experimental investigation of a magnetically coupled vibration energy harvester using two inverted piezoelectric cantilever beams for rotational motion. Energy Conversion and Management, 148, 1391–1398 (2017)
[3]	BASARAN, S. Hybrid energy harvesting system under the electromagnetic induced vibrations with non-rigid ground connection. Mechanical Systems and Signal Processing, 163, 108198 (2022)
[4]	WANG, J. M., LAI, S., WANG, C., ZHANG, Y. T., and CHEN, Z. L. On the role of sliding friction effect in nonlinear tri-hybrid vibration-based energy harvesting. Applied Mathematics and Mechanics (English Edition), 45(8), 1295–1314 (2024) https://doi.org/10.1007/s10483-024-3133-8
[5]	MITCHESON, P. D., MIAO, P., STARK, B. H., YEATMAN, E. M., HOLMES, A. S., and GREEN, T. C. MEMS electrostatic micropower generator for low frequency operation. Sensors and Actuators A: Physical, 115(2-3), 523–529 (2004)
[6]	NGOUABO, U. G., TUWA, P. R. N., NOUBISSIE, S., and WOAFO, P. Nonlinear analysis of electrostatic micro-electro-mechanical systems resonators subject to delayed proportional-derivative controller. Journal of Vibration and Control, 27(1-2), 220–233 (2021)
[7]	QIN, Z., YIN, Y. Y., ZHANG, W. Z., LI, C. J., and PAN, K. Wearable and stretchable triboelectric nanogenerator based on crumpled nanofibrous membranes. ACS Applied Materials & Interfaces, 11(13), 12452–12459 (2019)
[8]	WANG, T. Y., WANG, C., ZENG, Q. X., GU, G. Q., WANG, X., CHENG, G., and DU, Z. L. A real-time, self-powered wireless pressure sensing system with efficient coupling energy harvester, sensing, and communication modules. Nano Energy, 125, 109533 (2024)
[9]	LIN, Z. Q., HONG, J. L., HUANG, C. Z., ZHANG, X. Y., SHEN, S. T., DU, Z. H., ZHOU, P. P., MIAO, Y. B., LIN, Z. H., LYU, X. L., and ZOU, Z. G. A strong, tough, and high-efficiency hydrogel thermocell for thermal energy harvesting. Nano Energy, 138, 110878 (2025)
[10]	HUSSAIN, Z., LEE, M., and CHO, H. Thermophysical advancements and stability dynamics in nanofluids for solar energy harvesting: a comprehensive review. Renewable Energy, 248, 123052 (2025)
[11]	AL MAHADI HASAN, M., ZHU, W. X., BOWEN, C. R., WANG, Z. L., and YANG, Y. Triboelectric nanogenerators for wind energy harvesting. Nature Reviews Electrical Engineering, 1(7), 453–465 (2024)
[12]	ALI, N. U. H. L., PAZHAMALAI, P., SATHYASEELAN, A., DONGALE, T. D., and KIM, S. J. A self-integration via dual-active mode structural-SC-TENG energy device for electrochemical energy storage and triboelectric energy harvesting. Applied Energy, 376, 124265 (2024)
[13]	YU, T. C., LIANG, F., and YANG, H. L. Vibration energy harvesting of a three-directional functionally graded pipe conveying fluids. Applied Mathematics and Mechanics (English Edition), 46(5), 795–812 (2025) https://doi.org/10.1007/s10483-025-3249-8
[14]	CAO, D. X., WANG, J. R., GUO, X. Y., LAI, S. K., and SHEN, Y. J. Recent advancement of flow-induced piezoelectric vibration energy harvesting techniques: principles, structures, and nonlinear designs. Applied Mathematics and Mechanics (English Edition), 43(7), 959–978 (2022) https://doi.org/10.1007/s10483-022-2867-7
[15]	ZHANG, B., LIU, H. S., ZHOU, S. X., and GAO, J. A review of nonlinear piezoelectric energy harvesting interface circuits in discrete components. Applied Mathematics and Mechanics (English Edition), 43(7), 1001–1026 (2022) https://doi.org/10.1007/s10483-022-2863-6
[16]	LEÓN ÁVILA, B. Y., GARCÍA VÁZQUEZ, C. A., PÉREZ BALUJA, O., COTFAS, D. T., and COTFAS, P. A. Energy harvesting techniques for wireless sensor networks: a systematic literature review. Energy Strategy Reviews, 57, 101617 (2025)
[17]	YANG, Z. B., ZHOU, S. X., ZU, J., and INMAN, D. High-performance piezoelectric energy harvesters and their applications. Joule, 2(4), 642–697 (2018)
[18]	AHMAD, M. M. and KHAN, F. U. Review of vibration-based electromagnetic-piezoelectric hybrid energy harvesters. International Journal of Energy Research, 45(4), 5058–5097 (2021)
[19]	HUANG, X. B., and YANG, B. T. Towards novel energy shunt inspired vibration suppression techniques: principles, designs and applications. Mechanical Systems and Signal Processing, 182, 109496 (2023)
[20]	LIU, C. R., WANG, J. F., ZHANG, W., YANG, X. D., GUO, X. Y., LIU, T., and SU, X. Y. Synchronization of broadband energy harvesting and vibration mitigation via 1:2 internal resonance. International Journal of Mechanical Sciences, 301, 110503 (2025)
[21]	WANG, J. L., GENG, L. F., DING, L., ZHU, H. J., and YURCHENKO, D. The state-of-the-art review on energy harvesting from flow-induced vibrations. Applied Energy, 267, 114902 (2020)
[22]	YANG, T., ZHOU, S. X., FANG, S. T., QIN, W. Y., and INMAN, D. J. Nonlinear vibration energy harvesting and vibration suppression technologies: designs, analysis, and applications. Applied Physics Reviews, 8(3), 031317 (2021)
[23]	WEI, C. F. and JING, X. J. A comprehensive review on vibration energy harvesting: modelling and realization. Renewable and Sustainable Energy Reviews, 74, 1–18 (2017)
[24]	ERTURK, A. and INMAN, D. J. On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. Journal of Intelligent Material Systems and Structures, 19(11), 1311–1325 (2008)
[25]	RAMLAN, R., BRENNAN, M. J., MACE, B. R., and KOVACIC, I. Potential benefits of a non-linear stiffness in an energy harvesting device. Nonlinear Dynamics, 59(4), 545–558 (2010)
[26]	NORENBERG, J. P., LUO, R., LOPES, V. G., PETERSON, J. V. L. L., and CUNHA, A. JR. Nonlinear dynamics of asymmetric bistable energy harvesters. International Journal of Mechanical Sciences, 257, 108542 (2023)
[27]	HUANG, X. B. and YANG, B. T. Improving energy harvesting from impulsive excitations by a nonlinear tunable bistable energy harvester. Mechanical Systems and Signal Processing, 158, 107797 (2021)
[28]	HUANG, X. B. Exploiting multi-stiffness combination inspired absorbers for simultaneous energy harvesting and vibration mitigation. Applied Energy, 364, 123124 (2024)
[29]	HUANG, X. B., WANG, B., HUANG, Z. W., HUA, X. G., and CHEN, Z. Q. A theoretical model for a low-frequency two-stage hybrid vibration isolator with a nonlinear energy sink and a negative stiffness spring. Applied Mathematical Modelling, 142, 115948 (2025)
[30]	HUANG, X. B., HUA, X. G., and CHEN, Z. Q. Exploiting a novel magnetoelastic tunable bi-stable energy converter for vibration energy mitigation. Nonlinear Dynamics, 113(3), 2017–2043 (2025)
[31]	WANG, C., LAI, S. K., WANG, J. M., FENG, J. J., and NI, Y. Q. An ultra-low-frequency, broadband and multi-stable tri-hybrid energy harvester for enabling the next-generation sustainable power. Applied Energy, 291, 116825 (2021)
[32]	ZHOU, Z. Y., HUANG, H. B., CAO, D., QIN, W. Y., ZHU, P., and DU, W. F. Harvest more bridge vibration energy by nonlinear multi-stable piezomagnetoelastic harvester. Journal of Physics D: Applied Physics, 57(13), 135501 (2024)
[33]	HUANG, X. B. and YANG, B. T. Investigation on the energy trapping and conversion performances of a multi-stable vibration absorber. Mechanical Systems and Signal Processing, 160, 107938 (2021)
[34]	ZHANG, X., HUANG, X. B., and WANG, B. A quad-stable nonlinear piezoelectric energy harvester with piecewise stiffness for broadband energy harvesting. Nonlinear Dynamics, 112(22), 19633–19652 (2024)
[35]	LU, Z. Q., SHAO, D., FANG, Z. W., DING, H., and CHEN, L. Q. Integrated vibration isolation and energy harvesting via a bistable piezo-composite plate. Journal of Vibration and Control, 26(9-10), 779–789 (2020)
[36]	LAI, S. K., WANG, C., and ZHANG, L. H. A nonlinear multi-stable piezomagnetoelastic harvester array for low-intensity, low-frequency, and broadband vibrations. Mechanical Systems and Signal Processing, 122, 87–102 (2019)
[37]	HUANG, W. C., MA, C., and QIN, L. H. Snap-through behaviors of a pre-deformed ribbon under midpoint loadings. International Journal of Solids and Structures, 232, 111184 (2021)
[38]	MAO, J. J., WEI, Z. G., and KE, L. L. Gravity-guided snapping sequence in 3D modular multistable metamaterials. International Journal of Mechanical Sciences, 285, (2025)
[39]	MAO, J. J., CHENG, H., and MA, T. X. Elastic wave insulation and propagation control based on the programmable curved-beam periodic structure. Applied Mathematics and Mechanics (English Edition), 45(10), 1791–1806 (2024) https://doi.org/10.1007/s10483-024-3164-9
[40]	LIU, M. C., GOMEZ, M., and VELLA, D. Delayed bifurcation in elastic snap-through instabilities. Journal of the Mechanics and Physics of Solids, 151, 104386 (2021)
[41]	LIU, M. C., DOMINO, L., DE DINECHIN, I. D, TAFFETANI, M., and VELLA, D. Snap-induced morphing: from a single bistable shell to the origin of shape bifurcation in interacting shells. Journal of the Mechanics and Physics of Solids, 170, 105116 (2023)
[42]	LIANG, H. T., HAO, G. B., and OLSZEWSKI, O. Z. A review on vibration-based piezoelectric energy harvesting from the aspect of compliant mechanisms. Sensors and Actuators A: Physical, 331, 112743 (2021)
[43]	ANDO, B. How can energy be scavenged from wideband vibrations? IEEE Instrumentation & Measurement Magazine, 18(1), 40–44 (2015)
[44]	BAI, Q., GAN, C. Z., ZHOU, T., DU, Z. C., WANG, J. H., WANG, Q., WEI, K. X., and ZOU, H. X. A triboelectric-piezoelectric-electromagnetic hybrid wind energy harvester based on a snap-through bistable mechanism. Energy Conversion and Management, 306, 118323 (2024)
[45]	LIU, Q., QIN, W. Y., YANG, Y. F., and ZHOU, Z. Y. Promote performance of vibration energy harvesting by amplified inertial force and clamped piezoelectric beams. Mechanical Systems and Signal Processing, 178, 109291 (2022)
[46]	CAO, Y. T., DERAKHSHANI, M., FANG, Y. H., HUANG, G. L., and CAO, C. Y. Bistable structures for advanced functional systems. Advanced Functional Materials, 31(45), 2106231 (2021)
[47]	DERAKHSHANI, M., MOMENZADEH, N., and BERFIELD, T. A. Analytical and experimental study of a clamped-clamped, bistable buckled beam low-frequency PVDF vibration energy harvester. Journal of Sound and Vibration, 497, 115937 (2021)
[48]	WU, N., HE, Y. C., and FU, J. Y. Bistable energy harvester using easy snap-through performance to increase output power. Energy, 226, 120414 (2021)
[49]	XIE, Z. Q., KWUIMY, C. A. K., WANG, Z. G., and HUANG, W. B. A piezoelectric energy harvester for broadband rotational excitation using buckled beam. AIP Advances, 8, 015125 (2018)
[50]	COTTONE, F., GAMMAITONI, L., VOCCA, H., FERRARI, M., and FERRARI, V. Piezoelectric buckled beams for random vibration energy harvesting. Smart Materials and Structures, 21(3), 035021 (2012)
[51]	LIU, W. Q., YUAN, Z. X., ZHANG, S., and ZHU, Q. Enhanced broadband generator of dual buckled beams with simultaneous translational and torsional coupling. Applied Energy, 251, 113412 (2019)
[52]	DERAKHSHANI, M., BERFIELD, T. A., and MURPHY, K. D. A component coupling approach to dynamic analysis of a buckled, bistable vibration energy harvester structure. Nonlinear Dynamics, 96(2), 1429–1446 (2019)
[53]	MASANA, R. and DAQAQ, M. F. Relative performance of a vibratory energy harvester in mono-and bi-stable potentials. Journal of Sound and Vibration, 330(24), 6036–6052 (2011)
[54]	COTTONE, F., GAMMAITONI, L., VOCCA, H., FERRARI, M., and FERRARI, V. Piezoelectric buckled beams for random vibration energy harvesting. Smart Materials and Structures, 21(3), 035021 (2012)
[55]	ZHU, Y., ZU, J., and SU, W. Broadband energy harvesting through a piezoelectric beam subjected to dynamic compressive loading. Smart Materials and Structures, 22(4), 045007 (2013)
[56]	QIAN, F., ZHOU, S. X., and ZUO, L. Approximate solutions and their stability of a broadband piezoelectric energy harvester with a tunable potential function. Communications in Nonlinear Science and Numerical Simulation, 80, 104984 (2020)
[57]	LIU, C. R., ZHAO, R., YU, K. P., LEE, H. P., and LIAO, B. P. A quasi-zero-stiffness device capable of vibration isolation and energy harvesting using piezoelectric buckled beams. Energy, 233, 121146 (2021)
[58]	WANG, X., DU, Q. Z., ZHANG, Y., LI, F., WANG, T., FU, G. Q., and LU, C. J. Dynamic characteristics of axial load bi-stable energy harvester with piezoelectric polyvinylidene fluoride film. Mechanical Systems and Signal Processing, 188, 110065 (2023)
[59]	FANG, S. T., ZHOU, S. X., YURCHENKO, D., YANG, T., and LIAO, W. H. Multistability phenomenon in signal processing, energy harvesting, composite structures, and metamaterials: a review. Mechanical Systems and Signal Processing, 166, 108419 (2022)
[60]	QIU, J., LANG, J. H., and SLOCUM, A. H. A curved-beam bistable mechanism. Journal of Microelectromechanical Systems, 13(2), 137–146 (2004)
[61]	LIU, C. R., ZHAO, R., YU, K. P., LEE, H. P., and LIAO, B. P. Simultaneous energy harvesting and vibration isolation via quasi-zero-stiffness support and radially distributed piezoelectric cantilever beams. Applied Mathematical Modelling, 100, 152–169 (2021)
[62]	DAVIS, R. B. and MCDOWELL, M. D. Combined Euler column vibration isolation and energy harvesting. Smart Materials and Structures, 26(5), 055001 (2017)
[63]	LIU, C. R., LIAO, B. P., ZHAO, R., YU, K. P., LEE, H. P., and ZHAO, J. Large stroke tri-stable vibration energy harvester: modelling and experimental validation. Mechanical Systems and Signal Processing, 168, 108699 (2022)