Applied Mathematics and Mechanics (English Edition) ›› 2026, Vol. 47 ›› Issue (7): 1603-1624.doi: https://doi.org/10.1007/s10483-026-3406-8
Previous Articles Next Articles
Received:2026-03-01
Revised:2026-04-28
Published:2026-06-30
Contact:
Zhaohe DA, E-mail: daizh@pku.edu.cnSupported by:2010 MSC Number:
Guozheng ZHANG, Zhaohe DA. Asymptotic models for thin transversely isotropic elastic layers. Applied Mathematics and Mechanics (English Edition), 2026, 47(7): 1603-1624.
Fig. 1
Schematic cross-section of a transversely isotropic elastic layer of thickness d on a rigid substrate. The layer is subject to a normal load and an in-plane shear traction on its upper surface (z=0). The top and bottom panels show notations with axisymmetry and without axisymmetry, respectively (color online)"
Fig. 2
Comparison of the axisymmetric solutions with the FEM results: (a) top-surface deflection w(r) and (b) top-surface radial displacement ur(r), both plotted against the normalized radius r/r0. Displacements are normalized as shown on the axes using the peak tractions qm (normal), tm (tangential), and the layer thickness d. Dashed and solid curves denote the solutions of different orders of the asymptotic expansion in dξ (color online)"
Fig. 3
Comparison of the asymptotic results with the FEM results in non-axisymmetric configurations: (a) top-surface deflection w(x) normalized by qmd/C33 and (b) top-surface in-plane displacement ux(x) normalized by tmd/C44, with qm and tm the peak normal and tangential tractions, respectively. Profiles along the centerline are plotted against the normalized coordinate x/x0, where x0=l0/2 is half the model width. Dashed and solid curves correspond to successive truncations of the asymptotic expansion in dξ (color online)"
Fig. 4
Comparison of the predicted axisymmetric tractions on the top surface of the bonded elastic layer with the FEM results: (a) normal traction q(r) and (b) radial shear traction tr(r), plotted against the normalized radius r/r0 and scaled as indicated on the axes. Symbols denote the FEM results. Dashed and solid curves show successive truncations of the asymptotic expansion in dξ (color online)"
Fig. 5
Non-axisymmetric tractions on the top surface of the bonded elastic layer: (a) normal traction q(x) and (b) shear traction tx(x) in the x-direction, scaled as indicated on the axes. Centerline profiles are plotted against x/x0, where x0 is half the model width. Symbols denote the FEM results, and dashed or solid curves correspond to successive truncations of the asymptotic expansion in dξ (color online)"
Fig. 6
Comparison of the theoretical and FEM results for ∇2w under combined normal and tangential loading: (a) axisymmetric case plotted against r/r0 and (b) three-dimensional centreline results plotted against x/x0. Symbols denote the FEM data, while dashed or solid curves correspond to successive truncations of the asymptotic expansion (color online)"
Fig. 8
Comparison of the asymptotic and FEM results for the normal traction q induced by the coupled surface displacements: (a) axisymmetric case plotted against r/r0 and (b) non-axisymmetric case plotted against x/x0. Symbols denote the FEM data, while dashed or solid curves correspond to successive truncations of the asymptotic expansion (color online)"
| [1] | JOHNSON, K. L. Contact Mechanics, Cambridge University Press, Cambridge (1985) |
| [2] | SHULL, K. R. Contact mechanics and the adhesion of soft solids. Materials Science and Engineering R: Reports, 36(1), 1–45 (2002) |
| [3] | BARBER, J. R. and CIAVARELLA, M. Contact mechanics. International Journal of Solids and Structures, 37(1-2), 29–43 (2000) |
| [4] | DILLARD, D. A., MUKHERJEE, B., KARNAL, P., BATRA, R. C., and FRECHETTE, J. A review of Winkler’s foundation and its profound influence on adhesion and soft matter applications. Soft Matter, 14(19), 3669–3683 (2018) |
| [5] | LEÓN BALDELLI, A. A. and BOURDIN, B. On the asymptotic derivation of Winkler-type energies from 3D elasticity. Journal of Elasticity, 121, 275–301 (2015) |
| [6] | DA SILVA, L. F. M., DAS NEVES, P. J. C., ADAMS, R. D., and SPELT, J. K. Analytical models of adhesively bonded joints—part I: literature survey. International Journal of Adhesion and Adhesives, 29, 319–330 (2009) |
| [7] | GOLAND, M. and REISSNER, E. The stresses in cemented joints. Journal of Applied Mechanics, 11(1), A17–A27 (1944) |
| [8] | BERTIN, V., AMAROUCHENE, Y., RAPHAËL, E., and SALEZ, T. Soft-lubrication interactions between a rigid sphere and an elastic wall. Journal of Fluid Mechanics, 933, A23 (2022) |
| [9] | DILLARD, D. A. Advances in Structural Adhesive Bonding, 2nd ed., Woodhead Publishing, Oxford (2023) |
| [10] | YU, C. L. and DAI, Z. H. Premature jump-to-contact with elastic surfaces. Journal of the Mechanics and Physics of Solids, 193, 105919 (2024) |
| [11] | KERR, A. On the formal development of elastic foundation models. Ingenieur-Archiv, 54(6), 455–464 (1984) |
| [12] | RU, C. Q. Surface instability of an elastic thin film interacting with a suspended elastic plate. Journal of Applied Mechanics, 69(2), 97–103 (2002) |
| [13] | WU, J. and RU, C. Q. Spherical indentation of an elastic layer on a rigid substrate revisited. Thin Solid Films, 669, 500–508 (2019) |
| [14] | DILLARD, D. A. Bending of plates on thin elastomeric foundations. Journal of Applied Mechanics, 56(2), 382–386 (1989) |
| [15] | SKOTHEIM, J. M. and MAHADEVAN, L. Soft lubrication. Physical Review Letters, 92(24), 245509 (2004) |
| [16] | MOVCHAN, A. B., REBROV, K. R., and RODIN, G. J. Axisymmetric deformation of compressible, nearly incompressible, and incompressible thin layers between two rigid surfaces. International Journal of Solids and Structures, 214-215, 61–73 (2021) |
| [17] | MOVCHAN, A. B., MOVCHAN, N. V., and RODIN, G. J. Asymptotic analysis of thin linear elastic layers constrained by two rigid plates. International Journal of Solids and Structures, 285, 112561 (2023) |
| [18] | CHANDLER, T. G. J. and VELLA, D. Validity of Winkler’s mattress model for thin elastomeric layers: beyond Poisson’s ratio. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476(2242), 20200551 (2020) |
| [19] | LI, H. and DAI, Z. H. Peeling from elastomeric layers: does material compressibility matter? International Journal of Mechanical Sciences, 302, 110331 (2025) |
| [20] | BARNES, M., FENG, F., and BIGGINS, J. S. Surface instability in a nematic elastomer. Physical Review Letters, 131(23), 238101 (2023) |
| [21] | WANG, L. J. and FENG, F. A continuum mechanics approach for the deformation of non-Euclidean origami generated by piecewise constant nematic director fields. Journal of the Mechanics and Physics of Solids, 208, 106460 (2025) |
| [22] | ARGATOV, I. and MISHURIS, G. Indentation Testing of Biological Materials, Springer International Publishing, Cham (2018) |
| [23] | WANG, B. J., LI, J. Y., FANG, Z., JIANG, Y. F., LI, S., ZHAN, F. Y., DAI, Z. H., CHEN, Q., and WEI, X. L. Large and pressure-dependent c-axis piezoresistivity of highly oriented pyrolytic graphite near zero pressure. Nano Letters, 24(16), 4965–4971 (2024) |
| [24] | WANG, B. J., YU, C. L., JIANG, Y. F., TIAN, C., TIAN, J. M., LI, S., FANG, Z., LI, M. L., WU, W. L., DAI, Z. H., TANIGUCHI, T., WATANABE, K., CHEN, Q., and WEI, X. L. Dielectric strength weakening of hexagonal boron nitride nanosheets under mechanical stress. Nature Communications, 16(1), 8078 (2025) |
| [25] | NING, X., LOVELL, M., and SLAUGHTER, W. S. Asymptotic solutions for axisymmetric contact of a thin, transversely isotropic elastic layer. Wear, 260(7-8), 693–698 (2006) |
| [26] | BORODICH, F. M., GALANOV, B. A., KEER, L. M., and SUAREZ-ALVAREZ, M. M. The JKR-type adhesive contact problems for transversely isotropic elastic solids. Mechanics of Materials, 75, 34–44 (2014) |
| [27] | VITUCCI, G., ARGATOV, I., and MISHURIS, G. An asymptotic model for the deformation of a transversely isotropic, transversely homogeneous biphasic cartilage layer. Mathematical Methods in the Applied Sciences, 40(9), 3333–3347 (2017) |
| [28] | ARGATOV, I. and MISHURIS, G. Contact Mechanics of Articular Cartilage Layers: Asymptotic Models, Springer International Publishing, Switzerland (2015) |
| [29] | LI, J. Y., ZHANG, G. Z., WANG, L., and DAI, Z. H. Indentation of a plate on a thin transversely isotropic elastic layer. Acta Mechanica Solida Sinica, 38(2), 331–340 (2025) |
| [30] | LEKHNITSKII, S. G., FERN, P., BRANDSTATTER, J. J., and DILL, E. Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, San Francisco (1963) |
| [31] | SNEDDON, I. N. Fourier Transforms, Dover Publications, Mineola, New York (1995) |
| [32] | DANIEL, I. and ISHAI, O. Engineering Mechanics of Composite Materials, Oxford University Press, New York (1994) |
| [33] | DING, H., CHEN, W., and ZHANG, L. Elasticity of Transversely Isotropic Materials, Springer, Dordrecht (2006) |
| [34] | DAHAN, M. and ZARKA, J. Elastic contact between a sphere and a semi infinite transversely isotropic body. International Journal of Solids and Structures, 13(3), 229–238 (1977) |
| [35] | AI, Z. Y., YUE, Z. Q., THAM, L. G., and YANG, M. Extended Sneddon and Muki solutions for multilayered elastic materials. International Journal of Engineering Science, 40(13), 1453–1483 (2002) |
| [36] | HANNAH, M. Contact stress and deformation in a thin elastic layer. The Quarterly Journal of Mechanics and Applied Mathematics, 4(1), 94–105 (1951) |
| [37] | ESSINK, M. H., PANDEY, A., KARPITSCHKA, S., VENNER, C. H., and SNOEIJER, J. H. Regimes of soft lubrication. Journal of Fluid Mechanics, 915, A49 (2021) |
| [38] | LIU, Y., JI, Q. Q., and GORIELY, A. Surface wrinkling of a hyperelastic half-space coated by a liquid crystal elastomer film. International Journal of Solids and Structures, 299, 112895 (2024) |
| [39] | LIU, Y., LIU, R. C., MA, W. Y., and GORIELY, A. Post-buckling of fiber-reinforced soft tissues. Journal of the Mechanics and Physics of Solids, 203, 106220 (2025) |
| [40] | WANG, Y. H., THAM, L. G., and CHEUNG, Y. K. Beams and plates on elastic foundations: a review. Progress in Structural Engineering and Materials, 7(4), 174–182 (2005) |
| [41] | COHEN, T., CHAN, C. U., and MAHADEVAN, L. Competing failure modes in finite adhesive pads. Soft Matter, 14(10), 1771–1779 (2018) |
| [1] | Zhengzhe XIE, S. EL-BORGI, Jie SU, Liaoliang KE. Mixed elastohydrodynamic lubrication contact of piezoelectric materials with different Gaussian rough surfaces [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(5): 965-984. |
| [2] | Ling WANG, Huoming SHEN, Yuxing WANG. Generalized semi-analytical modeling of three-dimensional contact responses in piezoelectric semiconductors with conductive indenters [J]. Applied Mathematics and Mechanics (English Edition), 2026, 47(3): 555-572. |
| [3] | Linyao WANG, Aibing ZHANG, Chuanzeng ZHANG, Jianke DU, Z. M. XIAO, Jia LOU. Rayleigh wave propagation in an elastic half-space with an attached piezoelectric semiconductor layer considering flexoelectricity and size-effects [J]. Applied Mathematics and Mechanics (English Edition), 2025, 46(6): 1069-1088. |
| [4] | Pengxu GUO, Yueting ZHOU. Exact analysis of the orientation-adjusted adhesive full stick contact of layered structures with the asymmetric bipolar coordinates [J]. Applied Mathematics and Mechanics (English Edition), 2022, 43(6): 883-898. |
| [5] | Jinling GAO, Wenjuan YAO, Jiankang LIU. Temperature stress analysis for bi-modulus beam placed on Winkler foundation [J]. Applied Mathematics and Mechanics (English Edition), 2017, 38(7): 921-934. |
| [6] | Xiaohua TAN, Yilan KANG, E. A. PATTERSON. Experimental investigation on surface deformation of soft half plane indented by rigid wedge [J]. Applied Mathematics and Mechanics (English Edition), 2016, 37(10): 1349-1360. |
| [7] | Jiayu WU, Hong YUAN, Renhuai LIU. Theory and calculation of stress transfer between fiber and matrix [J]. Applied Mathematics and Mechanics (English Edition), 2015, 36(6): 815-826. |
| [8] | LI Shan-Qing;YUAN Hong. Quasi-Green’s function method for free vibration of clamped thin plates on Winkler foundation [J]. Applied Mathematics and Mechanics (English Edition), 2011, 32(3): 265-276. |
| [9] | ZENG Qing-dun;HUANG Xiao-qing;LIN Xue-hui . STUDY ON STRESS CONCENTRATIONS IN AN INTRAPLY HYBRID COMPOSITE SHEET [J]. Applied Mathematics and Mechanics (English Edition), 2001, 22(2): 154-159. |
| [10] | Zhang Xi;Ye Yugong. ASYMPTOTIC ANALYSIS OF PLANE-STRAIN MODE I STEADY-STATE CRACK GROWTH IN TRANSFORMATION TOUGHENING CERAMICS(Ⅱ) [J]. Applied Mathematics and Mechanics (English Edition), 1997, 18(7): 689-696. |
| [11] | He Hong-qing;Hou Xiao;Cai Ti-min;Wu Xing-ping. AN IMPLICIT ALGORITHM OF THIN LAYER EQUATIONS IN VISCOUS,TRANSONIC,TWO-PHASE NOZZLE FLOW [J]. Applied Mathematics and Mechanics (English Edition), 1994, 15(4): 323-334. |
| [12] | Bu Xiao-ming;Yan Zong-da. BENDING PROBLEMS OF RECTANGULAR REISSNER PLATE WITH FREE EDGES LAID ON TENSIONLESS WINKLER FOUNDATIONS [J]. Applied Mathematics and Mechanics (English Edition), 1991, 12(6): 605-616. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||

Email Alert
RSS