Flow patterns and boundary conditions for inlet and outlet conduits of large pump system with low head

doi:10.1007/s10483-014-1821-6

Abstract

Abstract: The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional (3D) turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows: (i) Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. (ii) The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. (iii) The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.

Key words: Lekhnitskii method, eigenvalue, stress intensity factor, flow pattern, boundary condition, inlet conduit, outlet conduit, pump system, low head

2010 MSC Number:

Lei XU;Wei-gang LU;Lin-guang LU;Lei DONG;Zhao-fei WANG. Flow patterns and boundary conditions for inlet and outlet conduits of large pump system with low head. Applied Mathematics and Mechanics (English Edition), 2014, 35(6): 675-688.

TrendMD

References

[1] Kaya, D., Yagmur, E. A., Yigit, K. S., Kilic, F. C., Eren, A. S., and Celik, C. Energy efficiency in pumps. Energy Conversion and Mamagement, 49, 1662-1673 (2008)
[2] Lu, L. G. Basic flow patterns and optimum hydraulic design of a suction box of pumping station. Journal of Hydrodynamics, Series B, 12, 46-51 (2000)
[3] Lu, L. G. and Zhou, J. R. Numerical analogue of 3-D turbulent flow and hydraulic optimum design for the intake conduit of a pumping station (in Chinese). Shui Li Xue Bao, 12, 67-75 (1995)
[4] Lu, L. G., Wu, K. P., Leng, Y., and Zhu, J. Measurement for hydraulic loss of outlet conduit of pumping station (in Chinese). Drainage and Irrigation Machinery, 23, 23-26 (2005)
[5] Cheng, L., Wu, L. L., and Liu, C. Hydraulic unstable operating region of large scale axial flow pump (in Chinese). Journal of Irrigation Drainage, 29, 102-104 (2010)
[6] Liang, K. H., Cao, S. L., Chen, Y., and Zhu, B. S. Large-eddy simulation and analysis of turbulent flow in axial pump impeller (in Chinese). Fluid Machinery, 37, 9-14 (2009)
[7] Lin, J., Gong, Y. G., Wang, R. L., and Wu, L. J. Analysis on performance and operational adjustment of axial-flow pump (in Chinese). Drainage and Irrigation Machinery, 19, 12-14 (2001)
[8] Chen, H. X. and Guo, J. H. Numerical simulation of 3-D turbulent flow in the multi-intakes sump of the pump station. Journal of Hydrodynamics, Series B, 19, 42-47 (2007)
[9] Guo, Y. K., Wang, P. Y., and Zhou, H. J. Modeling study of the flow past irregularities in a pressure conduit. Journal Hydraulic Engineering, 133, 689-702 (2007)
[10] Rodi, W. T. Turbulence Models and Their Application in Hydraulics Experimental and Mathematical Fluid Dynamics, IAHR Section on Fundamentals of Division II, Delft, 44-46 (1980)
[11] Fen, H. M. Pump (in Chinese), China WaterPower Press, Beijing, 193-194 (1991)
[12] Qian, Z. D.,Wang Y., Huai, W. X., and Lee, Y. Numerical simulation of water flow in an axial flow pump with adjustable guide vanes. Journal of Mechanical Science and Technology, 24, 971-976 (2010)
[13] Kaya, D. Experimental study on regaining the tangential velocity energy of axial flow pump. Energy Conversion and Management, 44, 1817-1829 (2003)
[14] Chen, Y. P. Fluid Dynamics (in Chinese), Hohai University Press, Nanjing, 86-88 (1990)
[15] Qiu, B. Y., Liu, C., and Yuan, W. S. Influence of blade outlet angle of axial outlet diffuer of large pump on performance of its discharge passage (in Chinese). Chinese Journal of Mechanical Engineering, 36, 74-77 (2000)
[16] Liang, J. D., Lu, L. G., Xu, L., Chen, W., and Wang, G. Influence of flow velocity circulation at guide vane outlet of axial-flow pump on hydraulic loss in outlet conduit (in Chinese). Transactions of CSAE, 28, 55-60 (2012)
[17] Lu, L. G., Gao, D. Y., and Zhu, J. Optimum hydraulic design of siphon outlet in large pumping station (in Chinese). Journal of Agriculture Machinery, 36, 60-63 (2005)