Applied Mathematics and Mechanics (English Edition) ›› 2026, Vol. 47 ›› Issue (6): 1301-1322.doi: https://doi.org/10.1007/s10483-026-3395-9

Previous Articles     Next Articles

A nonlinear damping absorber for broadband and multi-directional vibration suppression

Haiting ZHENG1, Hu DING1,2,(), J. C. JI3   

  1. 1.Shanghai Key Laboratory of Mechanics in Energy Engineering, Shanghai Frontier Science Center of Mechanoinformatics, School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China
    2.Shanghai Institute of Aircraft Mechanics and Control, Shanghai 200092, China
    3.School of Mechanical and Mechatronic Engineering, University of Technology Sydney, NSW 2007, Australia
  • Received:2026-03-01 Revised:2026-03-31 Published:2026-06-18
  • Contact: Hu DING, E-mail: dinghu3@shu.edu.cn
  • Supported by:
    Project supported by the National Science Fund for Distinguished Young Scholars of China (No.?12025204)

Abstract:

Most existing vibration absorbers are limited by the need for precise tuning, and are difficult to suppress broadband vibration. A nonlinear damping absorber (NDA) is proposed in this paper to control the vibrations of structures in multiple modes, providing nonlinear damping in multiple directions and enabling broadband and multi-directional vibration suppression. A pipe is selected as the research object to analyze its dynamic behaviors and vibration suppression mechanisms. The vibration reduction performance of the NDA on the in-plane vibration and out-of-plane vibration of the pipe is studied through experimentation and theory. First, the configuration of the NDA is designed, and its mechanical model is established. An experimental platform is built for the parameter identification and multi-directional vibration reduction test of the absorber. Second, based on the generalized Hamilton’s principle, the mechanical model describing the in-plane vibration and out-of-plane vibration of the pipe with the NDAs is derived. The approximate solution of the nonlinear response is derived and numerically validated. The multi-directional and multi-modal vibration reduction efficiency of the NDAs for the structures is analyzed. The research results show that the proposed absorber can significantly control the multi-directional vibration. Nonlinear damping effectively broadens the vibration reduction bandwidth, and improves the damping efficiency, with the cubic term playing the dominant role. Finally, a concept of multi-modal weighted optimization is proposed. The absorber parameters are optimized through the particle swarm optimization (PSO) algorithm. This paper provides a new type of absorbers for the vibration control of multiple directions in broadband.

Key words: absorber, nonlinear damping, multi-directional vibration, vibration control

2010 MSC Number: 

APS Journals | CSTAM Journals | AMS Journals | EMS Journals | ASME Journals